3Com 2916-SFP User Guide - Page 89

Defining Port Settings 89 ■ 10 - Indicates the port is currently operating at 10 Mbps. ■ 100 - Indicates the port is currently operating at 100 Mbps. ■ 1000 - Indicates the port is currently operating at 1000 Mbps. ■ Auto - Use to automatically configure the port. ■ No Change - Retains the current port speed. ■ Duplex - Displays the port duplex mode. This field is configurable only when auto negotiation is disabled, and the port speed is set to 10M or 100M. This field cannot be configured on LAGs. The possible field values are: ■ Auto - Use to automatically configure the port. ■ Full - The interface supports transmission between the device and its link partner in both directions simultaneously. ■ Half - The interface supports transmission between the device and the client in only one direction at a time. ■ No Change - Retains the current port duplex mode. ■ Flow Control - Displays the flow control status on the port. Operates when the port is in full duplex mode. The possible field values are: ■ Enable - Enables flow control on the port. ■ Disable - Disables flow control on the port. ■ No Change - Retains the current flow control status on port. ■ Reactivate - Reactivates a port if the port has been shutdown through a device security option. The possible field values are: ■ Reactivate - Reactivates a port. ■ No Change - Retains the current port status. ■ Select Ports - Displays the ports to be configured. 2 Define the fields. 3 Click Apply. The ports are enabled, and the device is updated.