3Com 3C16470-US User Manual

3Com 3C16470-US Manual

Get 3Com 3C16470-US PDF manuals and user guides View all 3Com 3C16470-US manuals
Add to My Manuals
Save this manual to your list of manuals

3Com 3C16470-US manual content summary:

  • 3Com 3C16470-US | User Manual - Page 1
    ® 3 Baseline 10/100 Switch 16-Port (3C16470) and 24-Port (3C16471) User Guide DUA1647-0AAA01 1 45 13 89 16 17 12 20 21 24 INTRODUCTION The SuperStack® 3 Baseline 10/100 Switch is a versatile, easy-to-use unmanaged switch. It is ideal for users who want the high-speed performance of 10/100
  • 3Com 3C16470-US | User Manual - Page 2
    Datensteckdosen angeschlossen werden. 10BASE-T/100BASE-TX Ports The Baseline 10/100 Switch has 16 (3C16470) or 24 (3C16471) 10/100 Mbps auto-negotiating ports. To connect a device to the Baseline 10/100 Switch, use Category 5 unshielded or shielded (screened) 100 Ohm TP cable (or Category 3 cable
  • 3Com 3C16470-US | User Manual - Page 3
    . Spot Checks At frequent intervals you should visually check the Baseline 10/100 Switch. Regular checks can give you an early warning of a possible failure; any problems can then be attended to when there will be least effect on users. Check that all external cabling connections are secure and that
  • 3Com 3C16470-US | User Manual - Page 4
    und der Ausbau des Geräts darf nur durch Fachpersonal erfolgen. „ Wenn die Baseline 10/100 Switch Einheit in einer Stapel mit anderen SuperStack 3 Einheiten eingebaut werden soll, muß die Baseline 10/100 Switch Einheit unter die schmaleren Hub Einheiten eingebaut werden. „ Das Gerät nicht an eine
  • 3Com 3C16470-US | User Manual - Page 5
    MOUNTING KIT INSTRUCTIONS Introduction The Baseline 10/100 Switch is supplied with two mounting brackets and four screws. These are used for rack-mounting the unit. When mounting the unit, you should take note of the guidelines given in "Positioning the Baseline 10/100 Switch" on page 3. Rack
  • 3Com 3C16470-US | User Manual - Page 6
    The following options are available for technical support: „ In the first instance contact your Network Supplier. „ Check the 3Com knowledgebase at http://knowledgebase.3com.com „ Browse the 3Com web site on http://www.3com.com Country Telephone Number Asia, Pacific Rim Australia Hong Kong
  • 3Com 3C16470-US | User Manual - Page 7
    of any kind, either implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. 3Com may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time. UNITED STATES GOVERNMENT
  • 3Com 3C16470-US | User Manual - Page 8
    Product Registration You can now register your SuperStack 3 Baseline 10/100 Switch on the 3Com web site: http://support.3com.com/registration/frontpg.pl Documentation Feedback Your suggestions are very important to us. They will help make our documentation more useful to you. Please e-mail comments
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
The SuperStack
®
3 Baseline 10/100 Switch is a versatile,
easy-to-use unmanaged switch. It is ideal for users who want the
high-speed performance of 10/100 switching but do not need
sophisticated management capabilities. The Baseline 10/100
Switch is shipped ready for use. No configuration is necessary.
The Baseline 10/100 Switch has 16 or 24 shielded RJ-45,
10/100 Mbps auto-negotiating ports on the front panel. Each port
automatically determines the speed and duplex mode of the
connected equipment and provides a suitable switched
connection. Each port also supports automatic MDI/MDI-X
detection.
The Baseline 10/100 Switch is suited for office use where it can
be free standing, or rack mounted (in a wiring closet or
equipment room).
The Baseline 10/100 Switch comes with:
One power cord for use with the Baseline 10/100 Switch
Four self-adhesive rubber pads
One mounting kit
The Switch is powered from the AC mains supply.
The Baseline 10/100 Switch provides high performance switched
connections to 10 Mbps and 100 Mbps hubs, servers and
workstations that require a dedicated switched link.
The diagram below shows an sample configuration:
I
NTRODUCTION
Endstations on shared
100Mbps connections
Baseline Dual Speed Hub
100Mbps link
10Mbps link
100Mbps connection
to backbone
Endstations on switched
10Mbps connections
Baseline 10/100 Switch
Endstations on shared
10Mbps connections
Baseline Hub
SuperStack
®
3 Baseline 10/100 Switch 16-Port (3C16470) and 24-Port
(3C16471) User Guide
DUA1647-0AAA01
1
13
12
16
17
20
24
21
4
8
9
5
1