3Com 3CBLSG24 User Guide - Page 134
Root Guard, Default Path Cost, Path Cost, Priority, RSTP Link Type, Select Ports, Apply, Enabled
View all 3Com 3CBLSG24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
134 CHAPTER 11: CONFIGURING SPANNING TREE ■ Enabled - Indicates fast link is enabled on the port. ■ Auto - Enables the device to automatically establish a fast link. ■ Disabled - Indicates fast link is disabled on the port. ■ Root Guard - Restricts the interface from acting as the root port of the switch. The possible field values are: ■ Enable - Indicates Root Guard is enabled on the port ■ Disable - Indicates Root Guard is disabled on the port. ■ Default Path Cost - Indicates if Default Path Cost is enabled. The possible field values are: ■ Enable - Enables the default path cost on the port. ■ Disable - Disables the default path cost on the port. ■ Path Cost - Indicates the port contribution to the root path cost. The path cost is adjusted to a higher or lower value, and is used to forward traffic when a path is re-routed. The field range is 1-200,000,000. ■ Priority - Priority value of the port. The priority value influences the port choice when a bridge has two ports connected in a loop. The priority value is between 0 -240. The priority value is determined in increments of 16. ■ RSTP Link Type - Indicates whether a Point-to-Point link is established, or if the device is permitted to establish a Point-to-Point link. The possible field values are: ■ Auto - Enables the device to establish automatically Point-to-Point link. ■ Point to Point - Indicates if a Point-to-Point link is currently established on the port. Ports set to Full Duplex modes are considered Point-to-Point port links. ■ Shared - Enables the device to establish a shared link. ■ Select Port(s) - Indicates the ports to be defined. 2 Select the ports to be defined 3 Define the fields. 4 Click Apply. Spanning Tree is modified on the port, and the device is updated.