3Com 3CBLSG24 User Guide - Page 151
Defining Bandwidth Settings, Egress Shaping Rates, Status
View all 3Com 3CBLSG24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Defining Bandwidth Settings 151 Egress Shaping Rates ■ Status - Defines the shaping status. The possible field values are: ■ Enable - Enables egress traffic shaping for the interface. ■ Disable - Disables egress traffic shaping for the interface. ■ CIR - Defines CIR as the interface shaping type. The possible field range is 64-1,000,000,000 kbits per second. ■ CbS - Defines CbS as the interface shaping type. The possible field range is 4096-16,769,020 bytes per second. Defining Bandwidth Settings The Bandwidth Setup Page allows network managers to define the bandwidth settings for a specified interface. Interface shaping can be based on an interface and is determined by the lower specified value. The interface shaping type is selected in the Bandwidth Setup Page. The monitor user has no access to this page. To configure Bandwidth Settings: 1 Click Policy > QoS General > Bandwidth > Setup. The Bandwidth Setup Page opens: Figure 84 Bandwidth Setup Page