3Com 3CBLSG24 User Guide - Page 165
Upgrade the Firmware Image, Administration >, Firmware Upgrade > Restore Image, Download via TFTP
View all 3Com 3CBLSG24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Upgrade the Firmware Image 165 Upgrade the Firmware Image The Restore Image Page permits network managers to upgrade the switch firmware. ■ Note: The bootcode can only be upgraded using the Command Line Interface (CLI). See "Upgrading Software using the CLI" page 27. ■ The monitor user has no access to this page. To download the software image: 1 Click Administration > Firmware Upgrade > Restore Image. The Restore Image Page opens: Figure 93 Restore Image Page The Restore Image Page contains the following fields: ■ Download via TFTP - Enables initiating a download via the TFTP server. ■ Download via HTTP - Enables initiating a download via the HTTP server or HTTPS server. ■ TFTP Server IP Address - Specifies the TFTP Server IP Address from which the image files are downloaded. ■ Source File Name - Specifies the image files to be downloaded. 2 Define the relevant fields. 3 Click Apply. The files are downloaded, and the device is updated.