3Com 3CBLSG24 User Guide - Page 180
Monitoring > Cable Diagnostics > Diagnostics, Select a Port, Test Result, Cable Fault Distance
View all 3Com 3CBLSG24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
180 CHAPTER 17: MANAGING DEVICE DIAGNOSTICS To test cables: 1 Click Monitoring > Cable Diagnostics > Diagnostics. The Diagnostics Page opens: Figure 101 Diagnostics Page The Diagnostics Page contains the following fields: ■ Select a Port - Specifies the port to be tested. ■ Test Result - Displays the cable test results. Possible values are: ■ No Cable - Indicates that a cable is not connected to the port, or the cable is connected on only one side or the cable is shorter than 1 meter. ■ Short Cable - Indicates that a short has occurred in the cable. ■ OK - Indicates that the cable passed the test. ■ Cable Fault Distance - Indicates the distance from the port where the cable error occurred. A Cable Fault Distance of 0 can result from a short (