3Com 3CRTRV10075 Quick Start Guide

3Com 3CRTRV10075 - OfficeConnect Wireless 54Mbps 11g Travel Router Manual

3Com 3CRTRV10075 manual content summary:

  • 3Com 3CRTRV10075 | Quick Start Guide - Page 1
    WIRELESS 54MBPS 11G TRAVEL ROUTER 3CRTRV10075/WL-534 WIRELESS ACCESS POINT • ROUTER • WIRELESS CLIENT BRIDGE QUICK START GUIDE Introduction Please take a few minutes to familiarize yourself with the features and functions of your new 3Com OfficeConnect Wireless 54Mbps 11g Travel Router
  • 3Com 3CRTRV10075 | Quick Start Guide - Page 2
    initial configuration of the Travel Router or to perform any required configuration changes. In Setup/Configuration mode, the following settings are always used. User name Password IP address DHCP Server SSID Wireless Security admin The current password is used. Default password is blank. 192.168
  • 3Com 3CRTRV10075 | Quick Start Guide - Page 3
    Ethernet connection. See the later section Initial Configuration for details. Router Mode In Router Mode, the Travel Router acts as a DHCP Server, allocating IP addresses for Wireless stations (clients). It also acts as a Wireless NAT Router with SPI/Firewall, sharing the IP address on the Ethernet
  • 3Com 3CRTRV10075 | Quick Start Guide - Page 4
    services such as HTTP, FTP, E-mail, etc.) If you have problems, you should try getting permission for all users to connect to the LAN/WAN, so you can use AP mode instead. You can connect to the Travel Router, and change its configuration, while it is Router Mode. The IP address used is the Wireless
  • 3Com 3CRTRV10075 | Quick Start Guide - Page 5
    switch on the side of the Travel Router to select Setup/Configuration mode (switch position 3). 2 Power up and wait for the Wireless LED to turn on. This indicates the Travel Router is ready. 3 Establish a Wired or Wireless connection to the Travel Router. ■ Wired - connect a standard LAN cable from
  • 3Com 3CRTRV10075 | Quick Start Guide - Page 6
    the switch, you need to wait a few seconds for the Travel Router to become available. ■ Changing modes will break all existing Wireless connections. You need to re-connect using the SSID for the current mode. The default SSIDs are: ■ Setup/Configuration Mode: 3Com ■ AP Mode: 3Com ■ Router Mode: 3Com
  • 3Com 3CRTRV10075 | Quick Start Guide - Page 7
    LAN or WAN port. There is a potential problem if you change the LAN/WAN connection from the Travel Router to your PC, or vice versa. Some cable for the Travel Router's Wireless LAN interface, as set on the Router screen. The default value is 192.168.0.1: HTTP://192.168.0.1 3 If the password has been
  • 3Com 3CRTRV10075 | Quick Start Guide - Page 8
    . 2 Use the mode selector switch on the side of the Travel Router to select AP mode (switch position 1). 3 Wait for the restart to be completed, and the Wireless LED to light. 4 On your PC, select the wireless LAN matching the SSID of the Travel Router in AP mode. 5 If necessary, configure your PC
  • 3Com 3CRTRV10075 | Quick Start Guide - Page 9
    restart to be completed, and the Wireless LED to light. 4 The Travel Router will then connect, if possible, to the specified Wireless LAN. ■ You cannot connect to the Travel Router while in Client Mode. You must specify the desired Wireless LAN using Setup/Configuration mode. ■ In Client Mode, the
  • 3Com 3CRTRV10075 | Quick Start Guide - Page 10
    Campus Drive, Marlborough, MA 01752-3064, USA Declares that the Product: Date:September, 2004 Brand Name: 3Com Corporation Model Number: 3CRTRV10075 Equipment Type: OfficeConnect Wireless 54Mbps 11g Travel Router Complies with Part 15 of the FCC rules. Operation is subject to the following two
  • 3Com 3CRTRV10075 | Quick Start Guide - Page 11
    la norme CNR-210 du Canada. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur seulement for details. OfficeConnect Wireless 54Mbps 11g Travel Router 3CRTRV10075/WL-534 Quick Start Guide Published September 2004
  • 3Com 3CRTRV10075 | Quick Start Guide - Page 12
    such is provided with only such rights as are provided in 3Com's standard commercial license for the Software. Technical data is provided with limited rights only as provided you in conjunction with, this User Guide. Unless otherwise indicated, 3Com registered trademarks are registered in the United
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

O
FFICE
C
ONNECT
W
IRELESS
54M
BPS
11
G
T
RAVEL
R
OUTER
3CRTRV10075/WL-534
W
IRELESS
A
CCESS
P
OINT
• R
OUTER
• W
IRELESS
C
LIENT
B
RIDGE
Q
UICK
S
TART
G
UIDE
Introduction
Please take a few minutes to familiarize yourself with the features and
functions of your new 3Com OfficeConnect Wireless 54Mbps 11g Travel
Router.
Physical Features
Ethernet LED
On - Ethernet connection established.
Off - No Ethernet connection.
Flashing - Data being transferred.
Wireless LED
On - Wireless interface available.
Off - Wireless interface unavailable.
Flashing - Data being transferred.
Power LED
On - Power is available.
Off - No power.
Mode Selector
This switch has 4 positions:
1 - AP Mode
2 - Router Mode
3 – Setup/Configuration Mode
4 - Client Mode