3Ware 9550SXU-16ML User Guide - Page 234
h Drive not supported, 032h Spare capacity too small for some units, 033h Migration started
UPC - 693494971606
View all 3Ware 9550SXU-16ML manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
Chapter 11. Troubleshooting 030h Drive not supported 3ware 8000 and 9000 series Serial ATA Controller only support UltraDMA100/133 drives when using the parallel to serial ATA converter. This AEN indicates that an unsupported drive was detected during rollcall or a hot add. This AEN also could indicate that the Serial to Parallel converter was jumpered in the wrong place. The converter must be correctly jumpered to correspond to UDMA 100 or 133 drives. 032h Spare capacity too small for some units This AEN is sent by the controller when it finds a valid hot spare but the capacity is not sufficient to use it for a drive replacement. 033h Migration started This AEN is sent when migration of a unit is started. 034h Migration failed This AEN is sent when migration of a unit fails. Look at the Alarms page for other entries that will give you an idea of why the migration failed (such as a drive error on a specific port). 035h Migration completed This AEN is sent when migration of a unit is complete. The new capacity is now ready to be used. If the capacity of the array did not change, then you don't need to do anything else. If the capacity of the migrated array is larger, please refer to the part of this document on migration for information on how to change the file system to use the new capacity. 036h Verify fixed data/parity mismatch This AEN is sent by the controller when a verify error is found (parity inconsistency for RAID5/50 or data mismatch for RAID1/10 configuration) and recovered. If the error is not recovered the AEN_VERIFY_FAILED is returned instead. 037h SO-DIMM not compatible This AEN will be sent if an incompatible SODIMM memory has been connected to the controller. In this case, the controller is inoperable. 038h SO-DIMM not detected This AEN will be sent if there is no SODIMM memory connected to the controller. In this case, the controller is inoperable. 224 3ware 9550SX Serial ATA RAID Controller User Guide