AIWA UZ-US501 Operating Instructions
AIWA UZ-US501 Manual
View all AIWA UZ-US501 manuals
Add to My Manuals
Save this manual to your list of manuals |
AIWA UZ-US501 manual content summary:
- AIWA UZ-US501 | Operating Instructions - Page 1
4-252-190-11(1) USB Active Speaker System Operating Instructions UZ-US501 © 2004 Sony Corporation - AIWA UZ-US501 | Operating Instructions - Page 2
WARNINGW 2GB - AIWA UZ-US501 | Operating Instructions - Page 3
cord must only be changed at the qualified service shop. Magnetic objects ...Racks, magnets attached to the doors, health appliances, magnets used for toys, etc. If you have any questions or problems concerning your system, please consult your nearest Aiwa dealer. On placement Do not place the - AIWA UZ-US501 | Operating Instructions - Page 4
software "WinDVD," refer to 5, 20 page, and for instructions, refer to the help file after connecting the system. Required system equipment Required system for computer The following hardware and software are necessary for the speaker system USB port that supports USB 1.1 or higher Operating System - AIWA UZ-US501 | Operating Instructions - Page 5
• DVD Drive: DVD-ROM, DVD-R/RW, DVD-RAM DVD+RW Drivers for feeds II or more version • DirectX 8.1: Included in the supplied are omitted in this manual. Operating System Windows XP Home Edition necessary to upgrade the system and hardware on your computer. • Administrator support only. Log in - AIWA UZ-US501 | Operating Instructions - Page 6
setting for "WinDVD" ...20 Additional Information ...22 Troubleshooting ...22 Specifications ...24 Index to Parts and Controls ...25 This system incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. "Dolby - AIWA UZ-US501 | Operating Instructions - Page 7
: • Subwoofer (1) • Satellite speakers Front/Center (Dual Center) (2) Surround (2) • USB cable 1.8 m (5.9 ft.) (1) • Remote commander (remote) RM-Z7S101 (1) • CD-ROM WinDVD (1) • Operating Instructions (this book) (1) Inserting batteries into the remote You can control the system using the supplied - AIWA UZ-US501 | Operating Instructions - Page 8
the on-screen instructions to resume the installation. • If you use Windows 2000 or Windows XP, log in as Administrator before installing the driver. Notes • It may be necessary to restart the computer after you connect it to this system. • It is recommended to disconnect the USB cable when not - AIWA UZ-US501 | Operating Instructions - Page 9
Connection Subwoofer (this system) ANALOG IN R L SPEAKER USB FRONT R L CENTER OPTICAL IN SURROUND To wall outlet (mains) Getting Started A To USB port USB ANALOG IN R L SPEAKER R FRONT L CENTER OPTICAL IN SURROUND Green Red Gray Blue White Purple Speaker cords Speaker cords Center - AIWA UZ-US501 | Operating Instructions - Page 10
TV or VCR. See also the operating instructions of the equipment you want to connect. Connecting to a digital audio/video component Connect the component to the OPTICAL IN jack. ANALOG IN R L SPEAKER USB FRONT R L CENTER OPTICAL IN SURROUND optical digital cord (not supplied) DVD player, CD - AIWA UZ-US501 | Operating Instructions - Page 11
to 7.0 metres (1.2 to 21.1 ft.) (A) from the listening position. Also, this system allows you to place the surround speaker up to 4.6 metres (13.8 ft.) closer (B) to the satellite (Front/Center) speaker. You can place the surround speakers either behind or to the side of you, depending on the shape - AIWA UZ-US501 | Operating Instructions - Page 12
C/c Surround speaker (L) Subwoofer (the System) 1 2 3 Press ?/1 (POWER) to turn on the system. While pressing SHIFT, press S-MODE. DRC appears in the display. While pressing SHIFT, press S-MODE repeatedly for the desired setting. Each time you press S-MODE while pressing SHIFT, the setup menu - AIWA UZ-US501 | Operating Instructions - Page 13
seconds, the parameter turns off and is stored in the system. Getting Started Parameters The following are the parameters. xF-DIS (FRONT distance from the satellite (Front/ Center) speakers to the listening position. The satellite (Front/Center) speaker distance can be set anywhere from 0.4 - AIWA UZ-US501 | Operating Instructions - Page 14
the subwoofer to a computer with the USB cable, the volume of the computer should be set to maximum. Adjusting the speaker balance individually You can adjust the speakers individually, except for the front speakers. The center and surround speakers and subwoofer volume levels are adjusted to - AIWA UZ-US501 | Operating Instructions - Page 15
WOOFER +/-. Tip The test tone will make it easier to hear the difference in the volume level of each speaker. While pressing SHIFT, press MUTING/TEST TONE. You will hear the test tone from each speaker in sequence. Adjust the volume level so that the volume of the test tone from each - AIWA UZ-US501 | Operating Instructions - Page 16
Display 2CH H-T Tips • The system memorizes the last sound field selected USB again, DPLII MOVIE will be applied as the sound field. • You can identify the encoding format of program software by looking at its packaging. ,,181.61illy 7sADPHONE j.08c/F38331N2001 Tf5tT*0010.6S 0.7 - Dolby Digital - AIWA UZ-US501 | Operating Instructions - Page 17
mode AUTO FORMAT DECODE Effect Automatically detects the type of audio signal being input (Dolby Digital, DTS, Dolby Pro Logic, or standard 2 channel stereo acoustics of a 300-seat live concert. Obtains maximum audio impact from video game software. This mode outputs the sound from the headphone - AIWA UZ-US501 | Operating Instructions - Page 18
at low volume, the system compresses the dynamic range and finely adjusts for low-level sound. It is only functional when a DVD disc for DRC (audio DRC) is played. To use this function, connect your computer with the USB cable or the DVD component with the optical digital cable and set the Dolby - AIWA UZ-US501 | Operating Instructions - Page 19
, select ON using SELECT C/c. Select OFF, to turn off the auto power on/off function. The default setting is OFF. Tip To turn off the system completely when AUTO POWER is on, press ?/1 (POWER). The AUTO POWER indicator will turn off. 19GB - AIWA UZ-US501 | Operating Instructions - Page 20
screen. 1 Place "WinDVD" software CD into your CD-ROM drive. The installation CD-ROM window is displayed. If installer does not start automatically, launch "WinDVD" setup.exe program. The setup window is displayed. Click "Next," and then follow the on-screen instructions for installing. The "User - AIWA UZ-US501 | Operating Instructions - Page 21
3 Select the "Audio" tag. Enjoying DVD via a connected computer 1 2 Turn on the power of the system and its USB-connected computer. Insert a DVD into the DVD drive of your computer. "WinDVD" starts automatically. Play the DVD. 4 Select the "Digital (S/PDIF) out to External Processor," click " - AIWA UZ-US501 | Operating Instructions - Page 22
system, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Aiwa dealer. Severe hum or noise is heard. , Check that the speakers volume level. , Make sure the USB connection, speaker cables, and audio connecting cords are correct (page 9). - AIWA UZ-US501 | Operating Instructions - Page 23
the speaker volume (page 14). , The number of channel your computer outputs using "WinDVD" vary depends on the disc. There is no sound from Audio CD. , If the CD-ROM drive is not compliant with digital audio output, the sound from the CDROM drive will not be output via the USB connection. In - AIWA UZ-US501 | Operating Instructions - Page 24
For the U.S.A. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 4 page 7. Design and specifications are subject to change without notice. SS-UZ501 (Front/Center speakers) Speaker system Front: Closed box type Center: Uni directional type Speaker unit Front: 58 mm - AIWA UZ-US501 | Operating Instructions - Page 25
turned off, lights up red (STANDBY MODE). 4 ?/1 (POWER) Turns on and off the power of the system. 5 6 7 8 9 (remote sensor) Receives the remote control signals. Display Indicates the speaker setting, input signal, sound field mode, etc. INPUT Select the input signal. VOLUME +/- Adjust the volume - AIWA UZ-US501 | Operating Instructions - Page 26
Panel) ANALOG IN R L SPEAKER USB FRONT R L CENTER OPTICAL IN SURROUND 1 ANALOG IN (L/R) jacks Connect to the audio output of a TV, VCR, etc. 2 USB jack Connect to the computer. 3 OPTICAL IN jack Connect to the DIGITAL OUT (OPTICAL IN) jack of a DVD player, etc. 4 SPEAKER jacks Connect to - AIWA UZ-US501 | Operating Instructions - Page 27
. 6 ?/1 (POWER) Turns on and off the system. 7 INPUT Selects the input signal. 8 VOLUME +/-, SELECT C/c Makes the speaker settings or adjusts the volume of the system. Pressing this button while pressing SHIFT will set the system setup parameters. 9 WOOFER +/- Adjust the subwoofer volume. 27GB - AIWA UZ-US501 | Operating Instructions - Page 28
Sony Corporation Printed in Korea http://www.aiwa.com/
4-252-190-
11
(1)
© 2004 Sony Corporation
UZ-US501
USB Active
Speaker System
Operating Instructions