AOC 619Fh 619Fh Manual

AOC 619Fh Manual

AOC 619Fh manual content summary:

  • AOC 619Fh | 619Fh Manual - Page 1
    AOC 619Fh User's Manual About This Guide This guide describes the monitor's features, setup, and operation. lnformation in this document is subject to change without notice. The sections are as follows:  Safety Instructions: lists safety information.  Setup: describes the initial setup process. 
  • AOC 619Fh | 619Fh Manual - Page 2
    and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product . HG Declaration computer monitor:
  • AOC 619Fh | 619Fh Manual - Page 3
    or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.  Slots and . Please refer all servicing to qualified service personnel.  To ensure satisfactory operation, use the monitor only with UL listed
  • AOC 619Fh | 619Fh Manual - Page 4
    at the full face of the monitor, then adjust the monitor's angle to your own preference.  Hold the stand so you do not topple the monitor when you change the monitor's angle.  You are able to adjust the monitor's angle from -5°to 20 °. NOTE: Do not touch the LCD screen when you change the angle
  • AOC 619Fh | 619Fh Manual - Page 5
    back of the monitor. 2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer¡¯s DVI port. 4. the HDMI cable to the back of the monitor and connect the other end to the computer¡¯s HDMI
  • AOC 619Fh | 619Fh Manual - Page 6
    the holes of the arm with the holes in the back of the monitor. 4. Insert the 4 screws into the holes and tighten. 5. Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Noted : VESA mounting screw holes are not
  • AOC 619Fh | 619Fh Manual - Page 7
    6. Set the resolution SLIDE-BAR to 1920 by 1200. External Controls Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure ). By changing these settings, the picture can be adjusted to your personal preferences. * The power
  • AOC 619Fh | 619Fh Manual - Page 8
    . If you want to adjust any other function, repeat steps 2-3.  OSD Lock Function: To lock the OSD, press and hold the Menu button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the Menu button while the
  • AOC 619Fh | 619Fh Manual - Page 9
    DCB Adjustment What is DCB? Dynamic Color Boost (DCB) is an advanced color adjustment technology. Through analyzing RGB signals, DCB creates more vivid and natural images to suit various color environment needs. DCB has two types of color enhancers: "Color Boost" and "Picture Boost" . DCC: Dynamic
  • AOC 619Fh | 619Fh Manual - Page 10
    Nature Skin: When "Natural Skin" is turned on, the red and yellow colors are enriched automatically, thus presents human skin with more natural and truer colors. "Natural Skin" setting is ideal for viewing human portrait and detailed skin texture. Green Field: When "Green Field" is turned on, the
  • AOC 619Fh | 619Fh Manual - Page 11
    Sky Blue: When"Sky Blue" is turned on, the color blue is being fine-tuned so that the sky or ocean landscape will look more vivid and in-depth. "Sky Blue" setting is ideal for viewing sky and ocean images. Auto Detect: When "Auto Detect" is turned on, every pigment will be detected and self-adjusted
  • AOC 619Fh | 619Fh Manual - Page 12
    and the brightness of the bright areas, contrast ratio is uplifted to exceed 10000:1. DCR value varies subject to the original CR values of the LCD module. The higher the original CR, the higher DCR can be achieved. DCR is great for watching movie or video contents.
  • AOC 619Fh | 619Fh Manual - Page 13
    How to Use DCR? Go to the first OSD icon labeled "Luminance", turn on or off DCR as desires. DCR boosts the contrasts between lightness & darkness and enables the viewer to see more layers and details of the picture, especially in the darker areas. Please note when DCR is on, DCB will be disabled.
  • AOC 619Fh | 619Fh Manual - Page 14
    Function Control Illustration Luminance Brightness Contrast Eco mode Gamma DCR Image Setup Clock Phase H.Position V.Position Color Temp. Warm Normal Cool sRGB User Adjust Range 0-100 0-100 Standard Text Internet Game Movie Sports Gamma1 Gamma2 Gamma3 Off On 0-100 0-100 0-100 0-100 6500K 7300K 9300K
  • AOC 619Fh | 619Fh Manual - Page 15
    input (Only for the models with HDMI input) Auto adjust the picture to default Select wide or 4:3 format for display Turn ON/OFF DDC-CI Support Show the information of the main image and sub-image source Reset the menu to default Exit the main OSD Notes: 1)If the product has
  • AOC 619Fh | 619Fh Manual - Page 16
    How to use i-menu software Installation Welcome to use "i-menu" software by AOC. i-menu makes it easy to adjust your monitor display setting by menus on the screen instead of OSD button on the monitor. Please click here to setup the software. To complete installation , please follow the installation
  • AOC 619Fh | 619Fh Manual - Page 17
    Luminance Contrast Brightness Adjust Range 0-100 0-100 Standard Description Contrast from Digital-register. Backlight Adjustment Standard Mode Text Mode Text Eco mode Internet Internet Mode Game Game Mode Movie Movie Mode Gamma DCR Reset Sports Gamma1 Gamma2 Gamma3 Off On Sports Mode
  • AOC 619Fh | 619Fh Manual - Page 18
    2. Image setup Image Setup Clock Phase H.Position V.Position Reset Adjust Range 0-100 0-100 0-100 0-100 Description Adjust picture Clock to reduce Vertical-Line noise. Adjust Picture Phase to reduce Horizontal-Line noise Adjust the verticalposition of the picture. Adjust the horizontal position
  • AOC 619Fh | 619Fh Manual - Page 19
    -register Green Gain Digital-register. Blue Gain from Digital-register Reset the menu to default Remarks: 1) When "User" is chosen, you can change the monitor color to your desired color by setting the value of R-G-B. 2) When "sRGB" is chosen, the Brightness, Contrast and Gamma can not be adjusted.
  • AOC 619Fh | 619Fh Manual - Page 20
    4. Color Boost Color Boost Full Enhance Nature Skin Green Field Sky-blue AutoDetect Demo Reset Adjust Range on or off on or off on or off on or off on or off Description Disable or Enable Full Enhance Mode Disable or Enable Nature Skin Mode Disable or Enable Green Field Mode Disable or
  • AOC 619Fh | 619Fh Manual - Page 21
    5. Picture Boost Picture Boost Bright Frame Frame Size Brightness Contrast H. position V.position Reset Adjust Range on or off 14-100 0-100 0-100 0-100 0-100 Description Disable or Enable Bright Frame Adjust Frame Size Adjust Frame Brightness Adjust Frame Contrast Adjust Frame horizontal Position
  • AOC 619Fh | 619Fh Manual - Page 22
    6. Setting 7. Extra
  • AOC 619Fh | 619Fh Manual - Page 23
    Help On this page, you can find the information of the monitor . Welcome to link our website and send email to us if you have any problem. Compatibility : i-menu supports major graphic cards of ATI, Nvidia, Intel, VIA(S3). Please contact with us if your graphic card was not supported imenu software.
  • AOC 619Fh | 619Fh Manual - Page 24
    LCD Panel Resolution Physical Characteristics Environmental Model number 619Fh Driving system TFT Color LCD .8 mm Width 605 mm Depth 240 mm Weight (monitor only) 7.75kg Weight (with packaging) 10.8 kg mark. As an ENERGY STAR® Partner, AOC International (Europe) GmbH has determined that this
  • AOC 619Fh | 619Fh Manual - Page 25
    Preset Display Modes STAND VGA VGA VGA VGA Dos-mode SVGA SVGA SVGA SVGA Mac-mode XGA XGA XGA XGA VESA-Mode SXGA SXGA VESA-Mode VESA-Mode WSXGA WSXGA WUXGA SD SD SD SD SD SD Pin Assignments RESOLUTION 640¡Á480 @60Hz DMT 640¡Á480 @67Hz MAC 640¡Á480 @72Hz DMT 640¡Á480 @75Hz DMT 720¡Á400 @70Hz DOS 800
  • AOC 619Fh | 619Fh Manual - Page 26
    Signal Name DDC/CEC Ground +5V Power Hot Plug Detect Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

AOC 619Fh User’s Manual
About This Guide
This guide describes the monitor's features, setup, and operation.
lnformation in this document is subject to change without
notice.
The sections are as follows:
Safety Instructions
: lists safety information.
Setup
: describes the initial setup process.
Using the Monitor
: gives an overview of how to use the monitor.
Drivers
: provides driver installation instructions for Windows.
Technical Support
: provides tips and solutions for common problems.
Product Information
: lists the technical specifications of the monitor.
Warranty Statement
: Warranty Statement used in Europe.
National Conventions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes,
cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem.
Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the
warning is mandated by regulatory authority.