AOC 712s 712S Manual

AOC 712s Manual

Get AOC 712s PDF manuals and user guides View all AOC 712s manuals
Add to My Manuals
Save this manual to your list of manuals

AOC 712s manual content summary:

  • AOC 712s | 712S Manual - Page 1
    AOC 712Si Manual TABLE OF CONTENTS FOR YOUR SAFETY 1 SAFETY PRECAUTIONS 2 SPECIAL NOTES ON LCD MONITORS 3 BEFORE YOU OPERATE THE MONITOR 3 FEATURES 3 PACKING LIST 3 INSTALLATION INSTRUCTIONS 4 CONTROLS AND CONNECTORS 5 ADJUSTING THE VIEWING ANGLE 6 OPERATING INSTRUCTIONS 7 GENERAL
  • AOC 712s | 712S Manual - Page 2
    monitor, please read this manual thoroughly. This manual accordance with the instructions, may cause harmful . 2. Shielded interface cables and AC power cord, if any, must monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing
  • AOC 712s | 712S Manual - Page 3
    monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions The monitor monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor.  Do not attempt to service the monitor
  • AOC 712s | 712S Manual - Page 4
    SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES  Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it
  • AOC 712s | 712S Manual - Page 5
    INSTRUCTIONS SWIVEL BASE Install Remove Figure 1 Installing and Removing the Swivel Base POWER CORD Power Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in either 100/120V AC
  • AOC 712s | 712S Manual - Page 6
    your PC, depending on the type of power cord supplied with your LCD monitor. 5
  • AOC 712s | 712S Manual - Page 7
    port and tighten the two screws on the cable connector. Connecting the Power Cord: Connect the power cord into your LCD monitor's power input socket, and then plug the other end into a 3-pin AC power outlet. The power cord may be connected to either a wall power outlet or the power outlet socket on
  • AOC 712s | 712S Manual - Page 8
    's angle to your own preference.  Hold the stand so you do not topple the monitor when you change the monitor's angle.  You are able to adjust the monitor's angle from -5 to 20. 20° -5° Figure 3 NOTES  Do not touch the LCD screen when you change the angle. It may cause damage or break the
  • AOC 712s | 712S Manual - Page 9
    OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences.  The power cord should be
  • AOC 712s | 712S Manual - Page 10
    packing materials, as they will come in handy if you ever have to ship your monitor.  For maximum protection, repackage your monitor as it was originally packed at the factory.  To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth
  • AOC 712s | 712S Manual - Page 11
    HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press or to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If the function selected has a sub-menu, press or again to navigate through the sub-menu
  • AOC 712s | 712S Manual - Page 12
    ADJUSTING THE PICTURE The descriptions for function control LEDS Main Menu Item Main Menu Icon Sub Menu Item Sub Menu Icon Description Luminance Contrast Contrast from Digital-register. Brightness Backlight Adjustment Image Setup Image Position Color Temp. Focus Clock H. Position V.
  • AOC 712s | 712S Manual - Page 13
    Main Menu Item Auto Config Main Menu Icon Sub Menu Item Yes Sub Menu Icon Description N/A Auto Adjust the H/V Position, Focus and Clock of picture. No N/A Do not execute Auto Config, return to main menu. OSD Setup Language H. Position Adjust the horizontal position of the OSD. V.
  • AOC 712s | 712S Manual - Page 14
    WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL. This monitor meets the Green monitor standards as set by the Video Electronics Standards Association (VESA) and/or the United States Environmental
  • AOC 712s | 712S Manual - Page 15
    TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Check if the either turn ON or OFF after hitting the CAPS LOCK key. Missing one of the primary *Inspect the monitor's video cable and colors (RED, GREEN, or make sure that none of the pins are BLUE) bent
  • AOC 712s | 712S Manual - Page 16
    -cable is properly connected , If the connector is loose, tighten the connector's screws. 2. Check the signal-cable's connection pins for damage. INPUT NOT SUPPORTED : Your computer has been set to unsuitable display mode ,set the computer to display mode given in the following table (See page 17
  • AOC 712s | 712S Manual - Page 17
    ® Input Connector Input Video Signal Maximum Screen Size Power Source Environmental Considerations Dimension Weight (N. W.) Driving system TFT Color LCD Size 43.2cm(17.0") Pixel pitch 0.264mm( H ) × 0.264mm( V ) Video R,G,B Analog Interface Separate Sync. H/V TTL H-Frequency 30kHz - 80kHz
  • AOC 712s | 712S Manual - Page 18
    Switch External Controls: Functions Regulatory Compliance  Auto Adjust Key  Brightness  Contrast  Power Button  MENU  Contrast  Brightness  Focus  Clock  H. Position  V. Position  Auto Config  Language  Information  OSD Setup  (Warm)Color  (Cool)Color  User Color temperature 
  • AOC 712s | 712S Manual - Page 19
    Preset Display Modes STANDARD RESOLUTION Dos-mode 720 x 400 VGA 640 × 480 640 × 480 SVGA 800 × 600 800 × 600 XGA 1024 × 768 1024 × 768 1024 × 768 SXGA 1280 × 1024 1280 × 1024 HORIZONTAL FREQUENCY 31.47kHz 31.47kHz 37.50kHz 37.879kHz 46.875kHz 48.363kHz 56.476kHz 60.021kHz 64.000kHz 80.
  • AOC 712s | 712S Manual - Page 20
    CONNECTOR PIN ASSIGNMENT 1 5 6 10 11 15 PIN NO. 1. 2. 3. 4. 5. 6. 7. 8. 15 - Pin Color Display Signal Cable DESCRIPTION Red Green Blue RXD Ground R-Ground G-Ground B-Ground PIN NO. 9. 10. 11. 12. 13. 14. 15. DESCRIPTION +5V Detect Cable TXD DDC-Serial Data H-Sync V-Sync DDC-Serial Clock
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
AOC 712Si Manual
TABLE OF CONTENTS
FOR YOUR SAFETY --------------------------------------------------1
SAFETY PRECAUTIONS --------------------------------------2
SPECIAL NOTES ON LCD MONITORS -------------------3
BEFORE YOU OPERATE THE MONITOR ---------------------3
FEATURES --------------------------------------------------------3
PACKING LIST ---------------------------------------------------3
INSTALLATION INSTRUCTIONS ---------------------------4
CONTROLS AND CONNECTORS --------------------------5
ADJUSTING THE VIEWING ANGLE -----------------------6
OPERATING INSTRUCTIONS -------------------------------------7
GENERAL INSTRUCTIONS ----------------------------------7
HOW TO ADJUST A SETTING ------------------------------9
ADJUSTING THE PICTURE ------------------------------10-11
PLUG AND PLAY ----------------------------------------------- 12
TECHNICAL SUPPORT(FAQ) ------------------------------------ 13
ERROR
MESSAGE & POSSIBLE
SOLUTION -------- 14
APPENDIX -------------------------------------------------------------- 15
SPECIFICATIONS ----------------------------------------- 15-16
FACTORY PRESET TIMING TABLE ---------------------- 17
CONNECTOR PIN ASSIGNMENT ------------------------- 18