ASRock 890FX Deluxe4 User Manual

ASRock 890FX Deluxe4 Manual

Get ASRock 890FX Deluxe4 PDF manuals and user guides View all ASRock 890FX Deluxe4 manuals
Add to My Manuals
Save this manual to your list of manuals

ASRock 890FX Deluxe4 manual content summary:

  • ASRock 890FX Deluxe4 | User Manual - Page 1
    890FX Deluxe4 User Manual Version 1.0 Published July 2010 Copyright©2010 ASRock INC. All rights reserved. 1
  • ASRock 890FX Deluxe4 | User Manual - Page 2
    commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. With respect to the contents of this manual, ASRock does not , USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate
  • ASRock 890FX Deluxe4 | User Manual - Page 3
    2.12 Hot Plug and Hot Swap Functions for SATA3 HDDs 37 2.13 SATA3 HDD Hot Plug Feature and Operation Guide 38 2.14 Driver Installation Guide 40 2.15 Installing Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit With RAID Functions 40 2.15.1 Installing Windows® XP / XP 64-bit With
  • ASRock 890FX Deluxe4 | User Manual - Page 4
    BIOS Menu Bar 44 3.1.2 Navigation Keys 45 3.2 Main Screen 45 3.3 OC Tweaker Screen 46 3.4 Advanced Screen 53 3.4.1 CPU Screen 66 4 . Software Support 67 4.1 Install Operating System 67 4.2 Support CD Information 67 4.2.1 Running Support CD 67 4.2.2 Drivers Menu 67 4.2.3 Utilities Menu
  • ASRock 890FX Deluxe4 | User Manual - Page 5
    guide to BIOS setup and information of the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock
  • ASRock 890FX Deluxe4 | User Manual - Page 6
    Supports CPU up to 140W - Supports AMD's Cool 'n' QuietTM Technology - FSB 2600 MHz (5.2 GT/s) - Supports Untied Overclocking Technology (see CAUTION 2) - Supports Hyper-Transport 3.0 (HT 3.0) Technology - Northbridge: AMD 890FX - Southbridge: AMD SB850 - AMD Vision Black - Dual Channel DDR3 Memory
  • ASRock 890FX Deluxe4 | User Manual - Page 7
    / Line in/Front Speaker/Microphone (see CAUTION 6) - 6 x SATA3 6.0 Gb/s connectors by AMD SB850, support RAID (RAID 0, RAID 1, RAID 0+1 and RAID 5), NCQ, AHCI and "Hot Plug" functions - 2 x SATA3 6.0 Gb/s connectors by Marvell SE9123/9120, support NCQ, AHCI and "Hot Plug" functions - 2 x Rear USB
  • ASRock 890FX Deluxe4 | User Manual - Page 8
    - ACPI 1.1 Compliance Wake Up Events - Supports jumperfree - SMBIOS 2.3.1 Support - CPU, VCCM, NB, SB Voltage Multi-adjustment Support CD - Drivers, Utilities, AntiVirus Software (Trial Version), AMD OverDriveTM Utility, ASRock Software Suite (CyberLink DVD Suite - OEM and Trial) Unique
  • ASRock 890FX Deluxe4 | User Manual - Page 9
    the upgrade CPU performance with a better price. Please be noted that UCC feature is supported with AM3 CPU only, and in addition, not every AM3 CPU can support this function because some CPU's hidden core may be malfunctioned. 2. This motherboard supports Untied Overclocking Technology. Please
  • ASRock 890FX Deluxe4 | User Manual - Page 10
    embedded in Flash ROM. This convenient BIOS update tool allows you to update system BIOS without entering operating systems first like MS-DOS or Windows®. With this utility, you can press key during the POST or press key to BIOS setup menu to access ASRock Instant Flash. Just launch this
  • ASRock 890FX Deluxe4 | User Manual - Page 11
    CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU off mode condition. To meet EuP standard, an EuP ready motherboard and an EuP ready power supply are required. According to
  • ASRock 890FX Deluxe4 | User Manual - Page 12
    SOCKET AM3 HT3.0 AM3 Phenom II FSB2.6GHz Support 6-Core CPU Dual Channel 140W CPU DDR3 1866 DDR3_A1 (64 bit, 240-FpinSBmo8d0ul0e) DDR3_A2 (64 bit, 240-pin module) DDR3_B1 (64 bit, 240-FpinSBmo8d0ul0e) DDR3_B2 (64 bit, 240-pin module) 9 10 IDE1 FRONT_1394 PCI1 Super I/O 890FX Deluxe4
  • ASRock 890FX Deluxe4 | User Manual - Page 13
    Ports (USB45) 5 Side Speaker (Gray) 6 Rear Speaker (Black) 7 Central / Bass (Orange) 8 Line In (Light Blue) ** 9 Front Speaker (Lime) 14 13 12 11 10 Microphone (Pink) 11 USB 3.0 Ports (USB23) 12 IEEE 1394 Port (IEEE 1394) 13 eSATA3 Connector 14 USB 2.0 Ports (USB67) 15 USB 2.0 Ports (USB01) 16
  • ASRock 890FX Deluxe4 | User Manual - Page 14
    To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find "Mixer" tool on your system. Please select "Mixer ToolBox" , click "Enable playback multi-streaming", and click "ok". Choose "2CH", "
  • ASRock 890FX Deluxe4 | User Manual - Page 15
    , peripherals, and/or components. 1. Unplug the power cord from the wall socket before touching any component. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap
  • ASRock 890FX Deluxe4 | User Manual - Page 16
    Socker Corner Small Triangle STEP 2 / STEP 3: Match The CPU Golden Triangle To The Socket Corner Small Triangle STEP 4: Push Down And Lock The Socket Lever 2.2 Installation of CPU Fan and Heatsink After you install the CPU into this motherboard, it is necessary to install a larger heatsink and
  • ASRock 890FX Deluxe4 | User Manual - Page 17
    of Memory Modules (DIMM) This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memory Technology. DDR3_B2; White slots; see p.12 No.10), so that Dual Channel Memory Technology can be activated. This motherboard also allows you to install four DDR3
  • ASRock 890FX Deluxe4 | User Manual - Page 18
    matches the break on the slot. notch break notch break The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining
  • ASRock 890FX Deluxe4 | User Manual - Page 19
    lane width graphics cards, or used to install PCI Express graphics cards to support CrossFireXTM function. PCIE5 (PCIE x16 slot; Blue) is used for PCI the installation. Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis). Step 3. Remove the bracket facing
  • ASRock 890FX Deluxe4 | User Manual - Page 20
    Guide This motherboard supports supported with Windows® XP with Service Pack 2 / VistaTM / 7 OS. 3-way CrossFireXTM and Quad CrossFireXTM feature are supported with Windows® VistaTM / 7 OS only. Please check AMD website for ATITM CrossFireXTM driver updates manuals for detailed installation guide.
  • ASRock 890FX Deluxe4 | User Manual - Page 21
    Bridge Interconnects on the top of Radeon graphics cards. (CrossFire Bridge is provided with the graphics card you purchase, not bundled with this motherboard. Please refer to your graphics card vendor for details.) CrossFire Bridge or Step 3. Connect the DVI monitor cable to the DVI connector
  • ASRock 890FX Deluxe4 | User Manual - Page 22
    Bridge to connect Radeon graphics cards on PCIE4 and PCIE5 slots. (CrossFireTM Bridge is provided with the graphics card you purchase, not bundled with this motherboard. Please refer to your graphics card vendor for details.) 22
  • ASRock 890FX Deluxe4 | User Manual - Page 23
    CrossFireTM Bridge Step 5. Connect the DVI monitor cable to the DVI connector on the Radeon graphics card on PCIE2 slot. (You may use the DVI to D-Sub adapter to convert the DVI connector to D-Sub interface, and then connect the D-Sub monitor cable to the DVI to D-Sub adapter.) 23
  • ASRock 890FX Deluxe4 | User Manual - Page 24
    prior to installation. Please check AMD website for ATITM driver updates. Step 3. Step 4. Step 5. Install the required drivers to your system. For Windows® XP OS: A. ATITM recommends Windows® XP Service Pack 2 or higher to be installed (If you have Windows® XP Service Pack 2 or higher installed in
  • ASRock 890FX Deluxe4 | User Manual - Page 25
    is used only for identification or explanation and to the owners' benefit, without intent to infringe. * For further information of ATITM CrossFireXTM technology, please check AMD website for updates and details. 25
  • ASRock 890FX Deluxe4 | User Manual - Page 26
    Display Feature This motherboard supports Surround Display upgrade. With the external add-on PCI Express VGA cards, you can easily enjoy the benefits of Surround Display feature. For the detailed instruction, please refer to the document at the following path in the Support CD: ..\ Surround Display
  • ASRock 890FX Deluxe4 | User Manual - Page 27
    end to the motherboard connect the black end to the IDE devices 80-conductor ATA 66/100/133 cable Note: Please refer to the instruction of your IDE device These eight Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0
  • ASRock 890FX Deluxe4 | User Manual - Page 28
    ) USB_PWR P-11 P+11 GND DUMMY 1 GND P+10 P-10 USB_PWR USB_PWR P-13 P+13 GND DUMMY 1 GND P+12 P-12 USB_PWR Besides six default USB 2.0 ports on the I/O panel, there are two USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. IntA_P2_D+ IntA_P2_DGND IntA_P2_SSTX
  • ASRock 890FX Deluxe4 | User Manual - Page 29
    supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual activate the front mic. For Windows® XP / XP 64-bit OS: Select "Mixer". Select "Recorder". Then click "FrontMic". For Windows® 7 / 7 64-bit
  • ASRock 890FX Deluxe4 | User Manual - Page 30
    the fan connectors and match the black wire to the ground pin. CHA_FAN1/2/3 fan speed can be controlled through BIOS or OC Tuner utility. CPU Fan Connectors (4-pin CPU_FAN1) (see p.12 No. 7) 1 2 3 4 Please connect the CPU fan cable to the connector and match the black wire to the ground pin. 30
  • ASRock 890FX Deluxe4 | User Manual - Page 31
    Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3. Pin 1-3 Connected 3-Pin
  • ASRock 890FX Deluxe4 | User Manual - Page 32
    connect HDMI Digital TV/ projector/LCD devices. Please connect the HDMI_SPDIF connector of HDMI VGA card to this header. This front USB 3.0 panel can support 2 additional USB 3.0 ports besides the I/O panel. Please connect the light blue connector on the cable of this front USB 3.0 panel to the USB
  • ASRock 890FX Deluxe4 | User Manual - Page 33
    2.9 Smart Switches This motherboard has three smart switches: power switch, reset switch and clear CMOS switch, allowing users to quickly turn on/off or reset the system or clear
  • ASRock 890FX Deluxe4 | User Manual - Page 34
    2.10 Dr. Debug Dr. Debug is used to provide code information, which makes troubleshooting even easier. Please see the diagrams below for reading the Dr. Debug codes. The Bootblock initialization code sets up the chipset, memory and other components before system memory is available. The following
  • ASRock 890FX Deluxe4 | User Manual - Page 35
    initialize BIOS modules on POST entry and GPNV area. Initialized CMOS as mentioned in the Kernel Variable "wCMOSFlags." Check CMOS diagnostic byte to determine if battery power is OK and CMOS checksum is OK. Verify CMOS checksum manually by reading storage area. If the CMOS checksum is bad, update
  • ASRock 890FX Deluxe4 | User Manual - Page 36
    ESCD in NVRam. 84 Log errors encountered during POST. 85 Display errors to the user and gets the user response for error. 87 Execute BIOS setup if needed / requested. 8C Late POST initialization of chipset registers. 8D Build ACPI tables (if ACPI is supported) 8E Program the peripheral
  • ASRock 890FX Deluxe4 | User Manual - Page 37
    data cable to the motherboard's SATA3 connector. STEP 4: Connect the other end of the SATA data cable to the SATA3 hard disk. 2.12 Hot Plug and Hot Swap Functions for SATA3 HDDs This motherboard supports Hot Plug and Hot Swap functions for SATA3 in RAID / AHCI mode. AMD SB850 / Marvell SE9123/9120
  • ASRock 890FX Deluxe4 | User Manual - Page 38
    Please make sure the SATA3 driver is installed into system properly. The latest SATA3 driver is available on our support website: www.asrock.com 4. Make sure to use the SATA power cable & data cable, which are from our motherboard package. 5. Please follow below instructions step by step to reduce
  • ASRock 890FX Deluxe4 | User Manual - Page 39
    do follow below instruction sequence to process the Hot Plug, improper procedure will cause the SATA3 HDD damage and data loss. Step 1 Please connect SATA power cable 1x4-pin end Step 2 Connect SATA data cable to (White) to the power supply 1x4-pin cable. the motherboard's SATA3 connector. SATA
  • ASRock 890FX Deluxe4 | User Manual - Page 40
    the "SATA Operation Mode" option to [RAID]. STEP 2: Make a SATA3 Driver Diskette. A. Insert the ASRock Support CD into your optical drive to boot your system. B. During POST at the beginning of system boot-up, press key, and then a window for boot devices selection appears. Please select
  • ASRock 890FX Deluxe4 | User Manual - Page 41
    refer to the BIOS RAID installation guide part of the document in the following path in the Support CD: .. \ RAID Installation Guide STEP 3: Make a SATA3 Driver Diskette. Make a SATA3 driver diskette by following section 2.15.1 step 2 on page 40. STEP 4: Install Windows® 7 / 7 64-bit / VistaTM
  • ASRock 890FX Deluxe4 | User Manual - Page 42
    OS on your system. At the beginning of Windows® setup, press F6 to install a third-party AHCI driver. When prompted, insert the SATA3 driver diskette containing the AMD AHCI driver. After reading the floppy disk, the driver will be presented. Select the driver to install according to the OS you
  • ASRock 890FX Deluxe4 | User Manual - Page 43
    Technology This motherboard supports Untied Overclocking Technology, which means during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS setup to set the selection from [Auto] to [Manual
  • ASRock 890FX Deluxe4 | User Manual - Page 44
    Memory on the motherboard stores the BIOS SETUP UTILITY. You may run the BIOS SETUP UTILITY when you start up the computer. Please press or during the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise, POST up overclocking features Advanced To set up the advanced BIOS
  • ASRock 890FX Deluxe4 | User Manual - Page 45
    09] [Wed 07/14/2010] BIOS Version : 890FX Deluxe4 P1.00 Processor Type : AMD Phenom(tm) II X2 555 Processor (64bit) Processor Speed : 3200MHz Microcode Update : 100F43/10000B6 L1 Cache Size : 256KB L2 Cache Size : 2048KB L3 Cache Size : 6144KB Total Memory DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2 : 1024MB
  • ASRock 890FX Deluxe4 | User Manual - Page 46
    4800MHz)]. Please note that overclocking may cause damage to your CPU and motherboard. It should be done at your own risk and expense. CPU Configuration Overclock Mode Use this to select Overclock Mode. The default value is [Auto]. Configuration options: [Auto] and [Manual]. CPU Frequency (MHz) Use
  • ASRock 890FX Deluxe4 | User Manual - Page 47
    , which means you can enjoy the upgrade CPU performance with a better price. Please be noted that UCC feature is supported with AM3 CPU only, and in addition, not every AM3 CPU can support this function because some CPU's hidden core may be malfunctioned. CPU Active Core Control This allows you to
  • ASRock 890FX Deluxe4 | User Manual - Page 48
    allows you to adjust the value of CPU voltage. However, for safety and system stability, it is not bus width. Configuration options: [Auto], [8 Bit] and [16 Bit]. Memory Configuration Memory Clock This item can be set by the code using [Auto]. You can set one of the standard values as listed:
  • ASRock 890FX Deluxe4 | User Manual - Page 49
    Memory Timing BIOS SETUP UTILITY OC Tweaker Memory Timing Memory Controller Mode Power Down Enable Bank Interleaving Channel Interleaving CAS Latency (CL) 9 TRCD 12 TRP 12 TRAS 30 TRTP 5 TRRD 4 TWTR 5 TWR 10 TRC 33 TRWTWB 8 TRWTTO 7 TWRRD 2 [Unganged] [Disabled] [Auto] [
  • ASRock 890FX Deluxe4 | User Manual - Page 50
    TRRD Use this to adjust TRRD values. Configuration options: [Auto], [4CLK] to [7CLK]. The default value is [Auto]. TWTR Use this to adjust TWTR values. Configuration options: [Auto], [4CLK] to [7CLK]. The default value is [Auto]. TWR Use this to adjust TWR values. Configuration options: [Auto], [
  • ASRock 890FX Deluxe4 | User Manual - Page 51
    CHA ADDR/CMD Setup Use this to adjust values for CHA ADDR/CMD Setup feature. Configuration options: [Auto], [1/2CLK] and [1CLK]. The default value is [Auto]. CHA CS/ODT Delay Use this to adjust values for CHA CS/ODT Delay feature. Configuration options: [Auto], [No Delay], [1/64CLK] to [31/64CLK].
  • ASRock 890FX Deluxe4 | User Manual - Page 52
    Voltage Use this to select Hyper-Transport voltage. Configuration options: [Auto], [1.106V] to [1.506V]. The default value is [Auto]. CPU VDDA Voltage Use this to select CPU VDDA voltage. Configuration options: [Auto], [2.56V] and [2.70V]. The default value is [Auto]. PCIE VDDA Voltage Use this to
  • ASRock 890FX Deluxe4 | User Manual - Page 53
    section may cause the system to malfunction. ASRock Instant Flash ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This convenient BIOS update tool allows you to update system BIOS without entering operating systems first like MS-DOS or Windows®. Just launch this tool and save
  • ASRock 890FX Deluxe4 | User Manual - Page 54
    the additional hardware capabilities provided by AMD-V. The default value is [Enabled]. Configuration options: [Enabled] and [Disabled]. Enhance Halt State All processors support the Halt State (C1). The C1 state is supported through the native processor instructions HLT and MWAIT and requires no
  • ASRock 890FX Deluxe4 | User Manual - Page 55
    3.4.2 Chipset Configuration BIOS SETUP UTILITY Advanced Chipset Settings IOMMU PCIE2 and PCIE4 Link ASPM Onboard .54 (C) Copyright 1985-2003, American Megatrends, Inc. IOMMU This allows you to enable or disable IOMMU (AMD Input/Output Memory Management Unit). The default value is [Disabled]. PCIE2
  • ASRock 890FX Deluxe4 | User Manual - Page 56
    BIOS SETUP UTILITY Advanced ACPI Settings Suspend To RAM Check Ready Bit Away Mode Support Restore feature Check Ready Bit. Away Mode Support Use this item to enable or disable Away Mode support under Windows® XP Media Center OS. The motherboard to submit Windows® VistaTM certification. 56
  • ASRock 890FX Deluxe4 | User Manual - Page 57
    BIOS options: [AHCI], [RAID] and [IDE]. If you set this item to RAID mode, it is suggested to install SATA ODD driver on SATA3_5 AHCI] and [Disabled]. The default value is [IDE]. Compatible Mode This item is for Marvell SATA3_7 and SATA3_8/eSATA ports. Use this item to adjust Marvell SATA3
  • ASRock 890FX Deluxe4 | User Manual - Page 58
    BIOS SETUP UTILITY Advanced SATA3_1 Master Device Vendor Size LBA Mode Block Mode PIO Mode Async DMA Ultra DMA S.M.A.R.T. :Hard Disk :MAXTOR 6L080J4 :80.0 GB :Supported :16Sectors :4 :MultiWord DMA-2 :Ultra DMA-6 :Supported disk > 512 MB under DOS and Windows; for Netware and UNIX user, select
  • ASRock 890FX Deluxe4 | User Manual - Page 59
    ], [Enabled]. 32Bit Data Transfer Use this item to enable 32-bit access to maximize the IDE hard disk data transfer rate. 3.4.5 PCIPnP Configuration BIOS SETUP UTILITY Advanced Advanced PCI / PnP Settings PCI Latency Timer PCI IDE BusMaster [32] [Enabled] Value in units of PCI clocks for PCI
  • ASRock 890FX Deluxe4 | User Manual - Page 60
    3.4.6 Floppy Configuration In this section, you may configure the type of your floppy drive. BIOS SETUP UTILITY Advanced Floppy Configuration Floppy A [1.44 MB 312"] Select the type of floppy drive connected to the system. +F1 F9 F10 ESC Select Screen
  • ASRock 890FX Deluxe4 | User Manual - Page 61
    SETUP UTILITY Advanced Configure Super IO Chipset OnBoard Floppy Controller Serial Port Address Infrared Port Address [Enabled] [3F8 / IRQ4] [Disabled] Allow BIOS to Enable or Disable Floppy Controller. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and
  • ASRock 890FX Deluxe4 | User Manual - Page 62
    Support Use this option to select legacy support for USB devices. There are four configuration options: [Enabled], [Auto], [Disabled] and [BIOS select [Disabled] to enter OS. [BIOS Setup Only] - USB devices are allowed to use only under BIOS setup and Windows / Linux OS. USB 3.0 Controller Use this
  • ASRock 890FX Deluxe4 | User Manual - Page 63
    of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. BIOS SETUP UTILITY allows you to set the chassis fan 2 speed. Configuration options: [Full On] and [Manual Mode]. The default is value [Full On]. Chassis Fan 3 Setting This allows you to
  • ASRock 890FX Deluxe4 | User Manual - Page 64
    for you to configure the boot settings and the boot priority. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit [Enabled] [Disabled] [On] Disabled: Displays normal POST messages. Enabled: Displays OEM Logo instead of POST messages. +F1 F9 F10 ESC Select Screen Select
  • ASRock 890FX Deluxe4 | User Manual - Page 65
    this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit Security Settings Supervisor Password : Not Installed User Password : Not Installed Change
  • ASRock 890FX Deluxe4 | User Manual - Page 66
    Changes When you select this option, it will pop-out the following message, "Discard changes?" Select [OK] to discard all changes. Load BIOS Defaults Load BIOS default values for all the setup questions. F9 key can be used for this operation. Load Performance Setup Default This performance setup
  • ASRock 890FX Deluxe4 | User Manual - Page 67
    install the necessary drivers to activate the devices. 4.2.3 Utilities Menu The Utilities Menu shows the applications software that the motherboard supports. Click on a specific item then follow the installation wizard to install it. 4.2.4 Contact Information If you need to contact ASRock or want to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
1
890FX Deluxe4
User Manual
Version 1.0
Published July 2010
Copyright©2010 ASRock INC. All rights reserved.