ASRock 970 Pro3 R2.0 User Manual

ASRock 970 Pro3 R2.0 Manual

Get ASRock 970 Pro3 R2.0 PDF manuals and user guides View all ASRock 970 Pro3 R2.0 manuals
Add to My Manuals
Save this manual to your list of manuals

ASRock 970 Pro3 R2.0 manual content summary:

  • ASRock 970 Pro3 R2.0 | User Manual - Page 1
    970 Pro3 R2.0 User Manual Version 1.0 Published September 2012 Copyright©2012 ASRock INC. All rights reserved. 1
  • ASRock 970 Pro3 R2.0 | User Manual - Page 2
    purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate
  • ASRock 970 Pro3 R2.0 | User Manual - Page 3
    2.7 ASRock Smart Remote Installation Guide 26 2.8 Jumpers Setup 28 2.9 Onboard Headers and Connectors 29 2.10 Serial ATA3 (SATA3) Hard Disks Installation 34 2.11 Hot Plug and Hot Swap Functions for SATA3 HDDs 34 2.12 SATA3 HDD Hot Plug Feature and Operation Operation Guide. 35 2.13 Driver
  • ASRock 970 Pro3 R2.0 | User Manual - Page 4
    Event Monitoring Screen 58 3.6 Boot Screen 59 3.7 Security Screen 61 3.8 Exit Screen 62 4. Software Support 63 4.1 Install Operating System 63 4.2 Support CD Information 63 4.2.1 Running Support CD 63 4.2.2 Drivers Menu 63 4.2.3 Utilities Menu 63 4.2.4 Contact Information 63 4
  • ASRock 970 Pro3 R2.0 | User Manual - Page 5
    specific information about the model you are using. www.asrock.com/support/index.asp 1.1 Package Contents ASRock 970 Pro3 R2.0 Motherboard (ATX Form Factor) ASRock 970 Pro3 R2.0 Quick Installation Guide ASRock 970 Pro3 R2.0 Support CD 2 x Serial ATA (SATA) Data Cables (Optional) 1 x I/O Panel Shield
  • ASRock 970 Pro3 R2.0 | User Manual - Page 6
    Slot Audio LAN - ATX Form Factor - All Solid Capacitor design - Support for Socket AM3+ processors - Support for Socket AM3 processors: AMD PhenomTM II X6 / X4 / X3 / X2 (except 920 / 940) / Athlon II X4 / X3 / X2 / Sempron processors - Supports 8-Core CPU - Supports UCC feature (Unlock
  • ASRock 970 Pro3 R2.0 | User Manual - Page 7
    3.0 ports) - 32Mb AMI UEFI Legal BIOS with GUI support - Supports "Plug and Play" - ACPI 1.1 Compliance Wake Up Events - Supports jumperfree - SMBIOS 2.3.1 Support - CPU, VCCM, NB, SB Voltage Multi-adjustment - Drivers, Utilities, AntiVirus Software (Trial Version), CyberLink MediaEspresso 6.5 Trial
  • ASRock 970 Pro3 R2.0 | User Manual - Page 8
    CPU/Chassis/Power Fan Tachometer - CPU/Chassis Quiet Fan - CPU/ asrock.com WARNING Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking
  • ASRock 970 Pro3 R2.0 | User Manual - Page 9
    to adopt DDR3 2100/1866/1800/1600 memory module on this motherboard, please refer to the memory support list on our website for the compatible memory modules. Non OC mode's DDR3 1866 is supported by AM3+ CPU. ASRock website: http://www.asrock.com 3. Due to the operating system limitation, the actual
  • ASRock 970 Pro3 R2.0 | User Manual - Page 10
    during the POST or the key to enter into the BIOS setup menu to access ASRock Instant Flash. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without preparing an additional floppy diskette or
  • ASRock 970 Pro3 R2.0 | User Manual - Page 11
    supports continuous charging when your PC enters into Standby mode (S1), Suspend to RAM (S3), hibernation mode (S4) or power off (S5). With APP Charger driver installed, you can easily enjoy the marvelous charging experience. ASRock XFast USB ASRock 32-bit CPU. ASRock XFast RAM shortens the loading
  • ASRock 970 Pro3 R2.0 | User Manual - Page 12
    loss occurs during the BIOS update process, ASRock Crashless BIOS will automatically finish the BIOS update procedure after regaining power. Please note that BIOS files need to be placed in the root directory of your USB disk. Only USB2.0 ports support this feature. ASRock OMG (Online Management
  • ASRock 970 Pro3 R2.0 | User Manual - Page 13
    to get up to 15.77% performance boost! With the smart X-Boost, overclocking CPU can become a near one-button process. * The functionality of "Unlock CPU Cores" feature might vary by different processors. ASRock Restart to UEFI Windows® 8 brings the ultimate boot up experience. The lightning
  • ASRock 970 Pro3 R2.0 | User Manual - Page 14
    Night LED ASRock Good Night LED technology can offer you a better environment by extinguishing the unessential LED. By enabling Good Night LED in BIOS, the Power / HDD / LAN LED will be switched off when system is on. Not only this, Good night LED will automatically switch off Power and
  • ASRock 970 Pro3 R2.0 | User Manual - Page 15
    Motherboard Layout 1 2 34 5 6 7 PS2 Mouse PS2 Keyboard USB 2.0 T: USB0 B: USB1 ATX12V1 USB 2.0 T: USB2 B: USB3 LAN PHY USB 2.0 T: USB4 B: USB5 Support 8-Core CPU CPU_FAN2 CPU_FAN1 DDR3 2100+ AM3+ SOCKET RAM Super I/O PCIE3 970 Pro3 X Fast USB RoHS AMD SB950 Chipset 32Mb BIOS
  • ASRock 970 Pro3 R2.0 | User Manual - Page 16
    1.4 I/O Panel 1 2 3 6 4 7 5 8 13 12 11 10 9 1 PS/2 Mouse Port (Green) 8 Microphone (Pink) * 2 LAN RJ-45 Port 9 USB 3.0 Port (USB3_0_1) 3 Side Speaker (Gray) 10 USB 2.0 Port (USB_4_5) 4 Rear Speaker (Black) 11 USB 2.0 Port (USB_2_3) 5 Central / Bass (Orange) 12 USB 2.0 Port (
  • ASRock 970 Pro3 R2.0 | User Manual - Page 17
    , peripherals, and/or components. 1. Unplug the power cord from the wall socket before touching any component. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap
  • ASRock 970 Pro3 R2.0 | User Manual - Page 18
    Corner Small Triangle STEP 2 / STEP 3: STEP 4: Match The CPU Golden Triangle Push Down And Lock To The Socket Corner Small The Socket Lever Triangle 2.2 Installation of CPU Fan and Heatsink After you install the CPU into this motherboard, it is necessary to install a larger heatsink and
  • ASRock 970 Pro3 R2.0 | User Manual - Page 19
    2.3 Installation of Memory Modules (DIMM) This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR3 DIMM pair
  • ASRock 970 Pro3 R2.0 | User Manual - Page 20
    matches the break on the slot. notch break notch break The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining
  • ASRock 970 Pro3 R2.0 | User Manual - Page 21
    width graphics cards, or used to install PCI Express graphics cards to support CrossFireXTM function. PCIE3 (PCIE x16 slot) is used for PCI Express start the installation. Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis). Step 3. Remove the bracket facing
  • ASRock 970 Pro3 R2.0 | User Manual - Page 22
    Guide This motherboard supports supported with Windows® XP with Service Pack 2 / VistaTM / 7 / 8 OS. Quad CrossFireXTM feature is supported with Windows® VistaTM / 7 / 8 OS only. Please check AMD website for AMD CrossFireXTM driver updates 2.5.1 Graphics Card Setup 2.5.1.1 Installing Two
  • ASRock 970 Pro3 R2.0 | User Manual - Page 23
    Bridge Interconnects on the top of the Radeon graphics cards. (The CrossFire Bridge is provided with the graphics card you purchase, not bundled with this motherboard. Please refer to your graphics card vendor for details.) CrossFire Bridge or Step 3. Connect the DVI monitor cable to the DVI
  • ASRock 970 Pro3 R2.0 | User Manual - Page 24
    to uninstall any previously installed Catalyst drivers prior to installation. Please check AMD website for AMD driver updates. Step 3. Step 4. Step 5. Install the required drivers to your system. For Windows® XP OS: A. AMD recommends Windows® XP Service Pack 2 or higher to be installed
  • ASRock 970 Pro3 R2.0 | User Manual - Page 25
    technology, please check AMD website for updates and details. 2.6 Surround Display Feature This motherboard supports Surround Display upgrade. With the external add-on PCI Express VGA cards, you can easily enjoy the benefits of Surround Display feature. For the detailed instruction, please refer to
  • ASRock 970 Pro3 R2.0 | User Manual - Page 26
    GND IRTX IRRX ATX+5VSB Step3. Install Multi-Angle CIR Receiver to the front USB port. Step4. Boot up your system. Press or to enter BIOS Setup Utility. Make sure . Step5. Enter Windows. Execute ASRock support CD and install CIR Driver. (It is listed at the bottom of driver list.) 26
  • ASRock 970 Pro3 R2.0 | User Manual - Page 27
    chassis on the market. 3. The Multi-Angle CIR Receiver does not support Hot-Plug function. Please install it before you boot the system. * ASRock Smart Remote is only supported by some of ASRock motherboards. Please refer to ASRock website for the motherboard support list: http://www.asrock.com 27
  • ASRock 970 Pro3 R2.0 | User Manual - Page 28
    To clear and reset the system parameters to default setup, please turn off the computer and unplug the updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS ac- tion. Please be noted that the password, date, time, user default profile, 1394 GUID
  • ASRock 970 Pro3 R2.0 | User Manual - Page 29
    jumper caps over the headers and connectors will cause permanent damage of the motherboard! Serial ATA3 Connectors (SATA3_1: see p.15, No. 18) ( SATA3_3 SATA3_5 SATA3_4 SATA3_6 These six Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3
  • ASRock 970 Pro3 R2.0 | User Manual - Page 30
    allows convenient connection and control of audio devices. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC'97 audio
  • ASRock 970 Pro3 R2.0 | User Manual - Page 31
    PWRBTN (Power Switch): Connect to the power switch on the chassis front panel. You may configure the way to turn off your system using the power switch. RESET (Reset Switch): Connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer
  • ASRock 970 Pro3 R2.0 | User Manual - Page 32
    ) CPU_FAN_SPEED +12V (see p.15 No. 5) GND 1 2 3 4 Please connect the CPU fan cable to the connector and match the black wire to the ground pin. Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed
  • ASRock 970 Pro3 R2.0 | User Manual - Page 33
    Serial port Header (9-pin COM1) (see p.15 No.28) This COM1 header supports a serial port module. HDMI_SPDIF Header (2-pin HDMI_SPDIF1) (see p.15 No. default USB 3.0 ports on the I/O panel, there is one USB 3.0 header on this motherboard. This USB 3.0 header can support two USB 3.0 ports. 33
  • ASRock 970 Pro3 R2.0 | User Manual - Page 34
    SATA3) Hard Disks Installation This motherboard adopts AMD SB950 chipset that supports Serial ATA3 (SATA3) hard disks and RAID (RAID 0, RAID 1, RAID 5 and RAID 10) functions. You may install SATA3 hard disks on this motherboard for internal storage devices. This section will guide you to install the
  • ASRock 970 Pro3 R2.0 | User Manual - Page 35
    is installed into system properly. The latest SATA3 driver is available on our support website: www.asrock.com 4. Make sure to use the SATA power cable & data cable, which are from our motherboard package. 5. Please follow below instructions step by step to reduce the risk of HDD crash or data
  • ASRock 970 Pro3 R2.0 | User Manual - Page 36
    data cable to end (White) to the power supply 1x4-pin the motherboard's SATAII / SATA3 cable. connector. SATA power cable 1x4-pin power of attention, before you process the Hot Unplug: Please do follow below instruction sequence to process the Hot Unplug, improper procedure will cause the SATA3
  • ASRock 970 Pro3 R2.0 | User Manual - Page 37
    2.13 Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those
  • ASRock 970 Pro3 R2.0 | User Manual - Page 38
    you need to check the RAID installation guide in the Support CD for proper configuration. Please refer to the BIOS RAID installation guide part of the document in the following path in the Support CD: .. \ RAID Installation Guide STEP 3: Make a SATA3 Driver Diskette. (Please use an USB floppy or
  • ASRock 970 Pro3 R2.0 | User Manual - Page 39
    on your system. At the beginning of Windows® setup, press F6 to install a third-party AHCI driver. When prompted, insert the SATA3 driver diskette containing the AMD AHCI driver. After reading the floppy disk, the driver will be presented. Select the driver to install according to the OS you install
  • ASRock 970 Pro3 R2.0 | User Manual - Page 40
    Technology This motherboard supports Untied Overclocking Technology, which means during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you enable Untied Overclocking function, please enter "Overclock Mode" option of UEFI setup to set the selection from [Auto] to [Manual
  • ASRock 970 Pro3 R2.0 | User Manual - Page 41
    on the system chassis. You may also restart by turning the system off and then back on. Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen. 3.1.1 UEFI
  • ASRock 970 Pro3 R2.0 | User Manual - Page 42
    the screen To display the General Help Screen Discard changes and exit the UEFI SETUP UTILITY Load optimal default values for all the settings Save changes and exit the UEFI SETUP UTILITY Print screen Jump to the Exit Screen or exit the current screen 42
  • ASRock 970 Pro3 R2.0 | User Manual - Page 43
    will appear and display the system overview. System Browser System Browser can let you easily check your current system configuration in UEFI setup. OMG (Online Management Guard) Administrators are able to establish an internet curfew or restrict internet access at specified times via OMG. You
  • ASRock 970 Pro3 R2.0 | User Manual - Page 44
    is [Manual]. CPU Configuration Overclock Mode Use this to select Overclock Mode. Configuration options: [Auto] and [Manual]. The default value is [Auto]. Spread Spectrum This item should always be [Auto] for better system stability. ASRock UCC ASRock UCC (Unlock CPU Core) feature simplifies AMD CPU
  • ASRock 970 Pro3 R2.0 | User Manual - Page 45
    AMD IO C-State Support This allows you to enable or disable AMD IO C-State Support default. If it is set to [Manual], you may adjust the value of Processor of this item. CPU NB Voltage It allows you to adjust the value of CPU NB voltage. However the motherboard will detect the memory module(s)
  • ASRock 970 Pro3 R2.0 | User Manual - Page 46
    DRAM Timing Control DRAM Slot Use this to select DRAM slot to view SPD data. The default value is [DDR3_A1]. DRAM Timing Control Use this to select DRAM control. The default value is [Auto]. Power Down Enable Use this item to enable or disable DDR power down mode. Bank Interleaving
  • ASRock 970 Pro3 R2.0 | User Manual - Page 47
    to select NB Voltage. The default value is [Auto]. HT Voltage Use this to select HT Voltage. The default value is [Auto]. CPU VDDA Voltage Use this to select CPU VDDA Voltage. The default value is [Auto]. PCIE VDDA Voltage Use this to select PCIE VDDA Voltage. The default value is [Auto
  • ASRock 970 Pro3 R2.0 | User Manual - Page 48
    you may set the configurations for the following items: CPU Configuration, Nouth Bridge Configuration, South Bridge Configuration, flash drive, floppy disk or hard drive and launch this tool, then you can update your UEFI only in a few clicks without preparing an additional floppy diskette or other
  • ASRock 970 Pro3 R2.0 | User Manual - Page 49
    to [Disable] if above issue occurs. Enhance Halt State (C1E) All processors support the Halt State (C1). The C1 state is supported through the native processor instructions HLT and MWAIT and requires no hardware support from the chipset. In the C1 power state, the processor maintains the context of
  • ASRock 970 Pro3 R2.0 | User Manual - Page 50
    3.4.2 North Bridge Configuration Primary Graphics Adapter This item will switch the PCI Bus scanning order while searching for video card. It allows you to select the type of Primary VGA in case of multiple video controllers. The default value of this feature is [PCI Express]. Configuration options:
  • ASRock 970 Pro3 R2.0 | User Manual - Page 51
    3.4.3 South Bridge Configuration Onboard HD Audio Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If you select [Auto], the onboard HD Audio will be disabled when PCI Sound Card is plugged. Front Panel Select [Auto] or [Disabled] for the onboard HD Audio Front Panel.
  • ASRock 970 Pro3 R2.0 | User Manual - Page 52
    [IDE Mode]. If you set this item to RAID mode, it is suggested to install SATA ODD driver on SATA3_5 and SATA3_6 ports. AMD AHCI BIOS ROM Use this item to enable or disable AMD AHCI BIOS ROM. The default value of this option is [Disabled]. SATA IDE Combined Mode This item is for SATA3_5
  • ASRock 970 Pro3 R2.0 | User Manual - Page 53
    3.4.5 Super IO Configuration Serial Port Use this item to enable or disable the onboard serial port. Serial Port Address Use this item to set the address for the onboard serial port. Configuration options: [3F8h / IRQ4] and [3E8h / IRQ4]. Infrared Port Use this item to enable or disable the onboard
  • ASRock 970 Pro3 R2.0 | User Manual - Page 54
    the OS supports it. Check Ready Bit Use this item to enable or disable the feature Check Ready Bit. ACPI HPET table Use this item to enable or disable ACPI HPET Table. The default value is [Enabled]. Please set this option to [Enabled] if you plan to use this motherboard to submit
  • ASRock 970 Pro3 R2.0 | User Manual - Page 55
    USB Keyboard/Remote Power On Use this item to enable or disable the system to wake from S5 using USB Keyboard/Remote. USB Mouse Power On Use this item to enable or disable the system to wake from S5 using USB Mouse. CSM Please disable CSM when you enable Fast Boot option. The default value is [
  • ASRock 970 Pro3 R2.0 | User Manual - Page 56
    item to enable or disable the use of USB 3.0 controller. Legacy USB Support Use this option to select legacy support for USB devices. There are four confi guration options: [Enabled], [Auto], [Disabled] and [UEFI Setup Only]. The default value is [Enabled]. Please refer to below descriptions for
  • ASRock 970 Pro3 R2.0 | User Manual - Page 57
    3.4.8 Network Configuration Internet Setting Use this item to set up the internet connection mode. Configuration options: [DHCP (Auto IP)] and [PPPOE]. UEFI Download Server Use this item to select UEFI firmware download server for Internet Flash. Configuration options: [Asia], [Europe], [USA] and [
  • ASRock 970 Pro3 R2.0 | User Manual - Page 58
    of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. CPU Fan 1 & 2 Setting This allows you to set the CPU fan 1 & 2 speed. Confi guration options: [Full On] and [Automatic Mode]. The
  • ASRock 970 Pro3 R2.0 | User Manual - Page 59
    not boot by using an USB flash drive. [Ultra Fast] - There are a few restrictions. 1. Only supports Windows® 8 UEFI operating system. 2. You will not be able to enter BIOS Setup (Clear CMOS or run utility in Widows® to enter BIOS Setup). 3. If you are using an external graphics card, the VBIOS must
  • ASRock 970 Pro3 R2.0 | User Manual - Page 60
    Full Screen Logo Use this item to enable or disable OEM Logo. The default value is [Enabled]. AddOn ROM Display Use this option to adjust AddOn ROM Display. If you enable the option "Full Screen Logo" but you want to see the AddOn ROM information when the system boots, please select [Enabled].
  • ASRock 970 Pro3 R2.0 | User Manual - Page 61
    3.7 Security Screen In this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it. 61
  • ASRock 970 Pro3 R2.0 | User Manual - Page 62
    UTILITY. Discard Changes and Exit When you select this option, it will pop-out the following message, "Discard changes and exit setup?" Select [OK] to exit the UEFI SETUP UTILITY without saving any changes. Discard Changes When you select this option, it will pop-out the following message, "Discard
  • ASRock 970 Pro3 R2.0 | User Manual - Page 63
    install the necessary drivers to activate the devices. 4.2.3 Utilities Menu The Utilities Menu shows the applications software that the motherboard supports. Click on a specific item then follow the installation wizard to install it. 4.2.4 Contact Information If you need to contact ASRock or want to
  • ASRock 970 Pro3 R2.0 | User Manual - Page 64
    OS on a HDD Larger Than 2TB This motherboard is adopting UEFI BIOS that allows Windows® OS to be installed on at system POST. Set AHCI Mode in UEFI Setup Utility > Advanced > Storage Configuration > SATA Mode. 3. Choose the item "UEFI:xxx" to boot in UEFI Setup Utility > Boot > Boot Option #1. ("xxx
  • ASRock 970 Pro3 R2.0 | User Manual - Page 65
    This motherboard is adopting UEFI BIOS that F2> or at system POST. Set RAID Mode in UEFI Setup Utility > Advanced > Storage Configuration > SATA Mode. 3. Choose onboard to save the change and exit. 4. Press to enter Boot Manual. Choose UEFI : Built - in EFI Shell. 5. Key in drvcfg,
  • ASRock 970 Pro3 R2.0 | User Manual - Page 66
    7. And then key in drvcfg -s [Drv number] [Ctrl number] to enter Raid Utility. For example: key in drvcfg -s 4E B5. 8. Choose Logical Drive Main Menu to set up Raid Drive. 9. Choose Logical Drive Create Menu to create a Raid Drive. 10. Choose Usable Physical Drive List to select Raid HDD. 66
  • ASRock 970 Pro3 R2.0 | User Manual - Page 67
    . After set up Raid size, please click Start to Create. 14. Press to exit Utility. 15. During reboot, please press to enter Boot Manual. Choose UEFI: SCSI CD/DVD Drive. * This option only shows on Windows® 8 64-bit, 7 64-bit and VistaTM 64-bit OS. 67
  • ASRock 970 Pro3 R2.0 | User Manual - Page 68
    Windows® Installation Guide to install OS. If you install Windows® 8 64-bit / 7 64-bit / VistaTM 64-bit in a large hard disk (ex. Disk volume > 2TB), it may take more time to boot into Windows® or install driver/utilities. If you encounter this problem, you will need to following instructions to fix
  • ASRock 970 Pro3 R2.0 | User Manual - Page 69
    B. Disable "Volume Shadow Copy" service. a. Type "computer management" in the Start Menu, then press "Enter". b. Go to "Services and Applications>Services"; Then double click "Volume Shadow Copy". c. Set "Startup type" to "Disable" then Click "OK". 69
  • ASRock 970 Pro3 R2.0 | User Manual - Page 70
    C. Reboot your system. D. After reboot, please start to install motherboard drivers and utilities. Windows® 8 64-bit / 7 64-bit: A. Please request the hotfix KB2505454 thru this link: http://support.microsoft.com/kb/2505454/ B. After installing Windows® 8 64-bit / 7 64-bit, install the hotfix
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
1
970 Pro3 R2.0
User Manual
Version 1.0
Published September 2012
Copyright©2012 ASRock INC. All rights reserved.