ASRock H110 Pro BTC Mining System Installation Guide
ASRock H110 Pro BTC Manual
 |
View all ASRock H110 Pro BTC manuals
Add to My Manuals
Save this manual to your list of manuals |
ASRock H110 Pro BTC manual content summary:
- ASRock H110 Pro BTC | Mining System Installation Guide - Page 1
Installation Guide Configuration: 1. ASRock H110 Pro BTC+ motherboard 2. 13 x PCIe riser kit 3. 13 x AMD / 8 x AMD + 5 x NVIDIA graphic cards. 4. Dedicated frame for 13 graphics cards and additional components 5. SSD boot drive 6. Minimum 4GB RAM (8GB is recommended) 7. Adapter for dual power supply - ASRock H110 Pro BTC | Mining System Installation Guide - Page 2
reliable PCIe riser kits with a USB connection and additional power input. 2. Always connect a power supply to the power connector of the PCIe riser card. 3. If a secondary power supply is used, please use a dual power supply adapter in order to start up both power supplies simultaneously. Page 2 - ASRock H110 Pro BTC | Mining System Installation Guide - Page 3
ATX cable. Please refer to the below picture for power connections (not including the required connections to the PCIe riser cards). The steps to install the system: Step 1. Please install the Skylake or Kaby Lake CPU and DDR4 memory on the H110 Pro BTC+. Step 2. Plug the graphics card into the PCIe - ASRock H110 Pro BTC | Mining System Installation Guide - Page 4
graphics card AND the PCIe riser card directly. Step 4. The first mining kit (PCIe riser + graphics card + power connections) should be installed on slot PCIE2. That is the x16 slot. Step 5. Connect the main power supply to the PCIE PWR and SATA PWR headers, and to the standard 24-pin ATX connector - ASRock H110 Pro BTC | Mining System Installation Guide - Page 5
driver is installed correctly. Go to device manager to check if the graphics card is detected properly. Shut down the system and then turn off the AC power. Step 10 . Install the second mining kit on the top PCIe x1 slot (which is closest to CPU) and repeat steps 3, - ASRock H110 Pro BTC | Mining System Installation Guide - Page 6
kits, graphics driver(s) and software, the system is ready for mining. Note: 1. Because of high temperatures from the graphics cards please set all graphics card fans to full speed. 2. If you want to use integrated graphics as main output, please set: BIOS Advanced Chipset Configuration IGPU
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
Page 1
ASRock H110 Pro BTC+ mining system Installation Guide
Configuration:
1.
ASRock H110 Pro BTC+ motherboard
2.
13 x PCIe riser kit
3.
13 x AMD / 8 x AMD + 5 x NVIDIA graphic cards.
4.
Dedicated frame for 13 graphics cards and additional components
5.
SSD boot drive
6.
Minimum 4GB RAM (8GB is recommended)
7.
Adapter for dual power supply (Optional)
8.
Total power supply at least 2400W (Depends on system configuration)
*
*
We suggest users to visit the official website of the graphics card vendor to check the graphics card TDP. Please refer to
the following example.
Nvidia GTX1060: It requires 120W power for each card.
Link:
AMD RX470: It requires 120W power for each card.
Link:
If the system uses eight RX470 and five GTX1060, the total sum including other components is 1810W. Accounting for
power conversion efficiency, the recommended power supply for this example is at least 2400W.
H110 Pro BTC+ with
CPU + memory + SSD
RX470 x Qty
GTX1060 x Qty
Total
250W
120W x 8
120W x 5
1810W
Please refer to the following link for an installation video on our Youtube channel: