ASRock H77 Pro4/MVP User Manual

ASRock H77 Pro4/MVP Manual

Get ASRock H77 Pro4/MVP PDF manuals and user guides View all ASRock H77 Pro4/MVP manuals
Add to My Manuals
Save this manual to your list of manuals

ASRock H77 Pro4/MVP manual content summary:

  • ASRock H77 Pro4/MVP | User Manual - Page 1
    H77 Pro4/MVP User Manual Version 1.0 Published December 2011 Copyright©2011 ASRock INC. All rights reserved. 1
  • ASRock H77 Pro4/MVP | User Manual - Page 2
    purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate
  • ASRock H77 Pro4/MVP | User Manual - Page 3
    CPU fan 19 2.5 Installation of Memory Modules (DIMM 20 2.6 Expansion Slots (PCI and PCI Express Slots 22 2.7 CrossFireXTM and Quad CrossFireXTM Operation Guide. 23 2.8 Dual Monitor and Surround Display Features 27 2.9 ASRock Smart Remote Installation Guide Guide 40 2.17 Driver Installation Guide
  • ASRock H77 Pro4/MVP | User Manual - Page 4
    CPU Configuration 53 3.4.2 North Bridge Configuration 55 3.4.3 South Bridge Configuration 56 3.4.4 Intel(R) Rapid Start Technology 57 3.4.5 Intel 66 4 Software Support 67 4.1 Install Operating System 67 4.2 Support CD Information 67 4.2.1 Running Support CD 67 4.2.2 Drivers Menu 67 4.2.3
  • ASRock H77 Pro4/MVP | User Manual - Page 5
    about the model you are using. www.asrock.com/support/index.asp 1.1 Package Contents ASRock H77 Pro4/MVP Motherboard (ATX Form Factor: 12.0-in x 7.9-in, 30.5 cm x 20.1 cm) ASRock H77 Pro4/MVP Quick Installation Guide ASRock H77 Pro4/MVP Support CD 2 x Serial ATA (SATA) Data Cables (Optional
  • ASRock H77 Pro4/MVP | User Manual - Page 6
    LGA1155 Package - Digi Power Design - 4 + 2 Power Phase Design - Supports Intel® Turbo Boost 2.0 Technology - Supports Intel® K-Series unlocked CPU - Supports Hyper-Threading Technology (see CAUTION 1) - Supports Intel® Rapid Start Technology and Smart Connect Technology with Intel® Ivy Bridge CPU
  • ASRock H77 Pro4/MVP | User Manual - Page 7
    Speaker/Central/Bass/Line in/Front Speaker/Microphone (see CAUTION 8) - 2 x SATA3 6.0 Gb/s connectors by Intel® H77, support RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage and Intel Smart Response Technology), NCQ, AHCI and Hot Plug functions - 2 x SATA3 6.0 Gb/s connectors by ASMedia
  • ASRock H77 Pro4/MVP | User Manual - Page 8
    BIOS with GUI support - Supports "Plug and Play" - ACPI 1.1 Compliance Wake Up Events - Supports jumperfree - SMBIOS 2.3.1 Support - CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA Voltage Multi-adjustment - Drivers, Utilities, AntiVirus Software (Trial Version), CyberLink MediaEspresso 6.5 Trial, ASRock
  • ASRock H77 Pro4/MVP | User Manual - Page 9
    visit our website: http://www.asrock.com WARNING Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system's stability
  • ASRock H77 Pro4/MVP | User Manual - Page 10
    there is no such limitation. You can use ASRock XFast RAM to utilize the memory that Windows® cannot use. 4. Only PCIE2 slot supports Gen 3 speed. To run the PCI Express in Gen 3 speed, please install an Ivy Bridge CPU. If you install a Sandy Bridge CPU, the PCI Express will run only at PCI Express
  • ASRock H77 Pro4/MVP | User Manual - Page 11
    during the POST or the key to enter into the BIOS setup menu to access ASRock Instant Flash. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without preparing an additional floppy diskette
  • ASRock H77 Pro4/MVP | User Manual - Page 12
    option to adopt three different CPU cooler types, Socket LGA 775, LGA 1155 and LGA 1156. Please be noticed that not all the 775 and 1156 CPU Fan can be used. 21. ASRock XFast RAM is not supported by Microsoft® Windows® XP / XP 64-bit. Intel® Smart Connect Technology and Intel® USB 3.0 ports are not
  • ASRock H77 Pro4/MVP | User Manual - Page 13
    ErP/EuP Ready LAN PHY 35 PCIE2 USB3_0_1 1 10 PCI Express 3.0 CMOS Battery Intel 11 H77 34 PCI1 Super I/O XFast LAN XFast RAM 33 PCIE3 64Mb BIOS 12 SATA3 6Gb/s Designed in Taipei XFast USB H77 Pro4/MVP 13 SATA2_5 SATA2_4 32 AUDIO PCI2 CODEC 14 RoHS SATA2_3 31 HD_AUDIO1
  • ASRock H77 Pro4/MVP | User Manual - Page 14
    1.4 I/O Panel 1 USB 2.0 Ports (USB01) 2 D-Sub Port (VGA1) 3 USB 2.0 Ports (USB23) * 4 LAN RJ-45 Port 5 Central / Bass (Orange) 6 Rear Speaker (Black) 7 Line In (Light Blue) ** 8 Front Speaker (Lime) 9 Microphone (Pink) 10 Optical SPDIF Out Port 11 USB 2.0 Ports (USB45) 12 USB 3.0 Ports (USB3_2_3)
  • ASRock H77 Pro4/MVP | User Manual - Page 15
    To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find "Mixer" tool on your system. Please select "Mixer ToolBox" , click "Enable playback multi-streaming", and click "ok". Choose "2CH", "
  • ASRock H77 Pro4/MVP | User Manual - Page 16
    Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any components. 2. To avoid damaging the motherboard's components due to static electricity, NEVER place your
  • ASRock H77 Pro4/MVP | User Manual - Page 17
    Intel 1155-Pin CPU, please follow the steps below. 1155-Pin Socket Overview Before you insert the 1155-Pin CPU into the socket, please check if the CPU surface is unclean or if there are any bent pins in the socket. Do not force to insert the CPU into the socket the motherboard for after service. 17
  • ASRock H77 Pro4/MVP | User Manual - Page 18
    key Pin1 Pin1 orientation key notch 1155-Pin CPU alignment key 1155-Pin Socket For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 3-3. Carefully place the CPU into the socket by using a purely vertical motion
  • ASRock H77 Pro4/MVP | User Manual - Page 19
    operation or contact other components. Please be noticed that this motherboard supports Combo Cooler Option (C.C.O.), which provides flexible options to adopt three different CPU cooler types, Socket LGA 775, LGA 1155 and LGA 1156. The white throughholes are for Socket LGA 1155/1156 CPU fan. 19
  • ASRock H77 Pro4/MVP | User Manual - Page 20
    2.5 Installation of Memory Modules (DIMM) This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR3 DIMM pair
  • ASRock H77 Pro4/MVP | User Manual - Page 21
    notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot in incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining
  • ASRock H77 Pro4/MVP | User Manual - Page 22
    card or ASRock Game Blaster motherboard's chassis fan connector (CHA_FAN1 or CHA_FAN2) when using multiple graphics cards for better thermal environment. 4. Only PCIE2 slot supports Gen 3 speed. To run the PCI Express in Gen 3 speed, please install an Ivy Bridge CPU. If you install a Sandy Bridge CPU
  • ASRock H77 Pro4/MVP | User Manual - Page 23
    Guide This motherboard supports supported with Windows® XP with Service Pack 2 / VistaTM / 7 OS. Quad CrossFireXTM is supported with Windows® VistaTM / 7 OS only. Please check AMD's website for AMD CrossFireXTM driver updates AMD graphics card manuals for detailed installation guide. Step 1. Insert
  • ASRock H77 Pro4/MVP | User Manual - Page 24
    Connect two Radeon graphics cards by installing a CrossFire Bridge on the CrossFire Bridge Interconnects on the top of the Radeon graphics cards. (The CrossFire Bridge is provided with the graphics card you purchase, not bundled with this motherboard. Please refer to your graphics card vendor for
  • ASRock H77 Pro4/MVP | User Manual - Page 25
    utility to uninstall any previously installed Catalyst drivers prior to installation. Please check AMD's website for AMD driver updates. Step 3. Step 4. Step 5. Install the required drivers to your system. For Windows® XP OS: A. AMD recommends Windows® XP Service Pack 2 or higher to be installed
  • ASRock H77 Pro4/MVP | User Manual - Page 26
    for identification or explanation and to the owners' benefit, without intent to infringe. * For further information of AMD CrossFireXTM technology, please check AMD's website for updates and details. 26
  • ASRock H77 Pro4/MVP | User Manual - Page 27
    cards to this motherboard. This motherboard also provides independent display controllers for DVI-D, D-Sub and HDMI to support dual VGA output -D port HDMI port 2. If you have already installed the onboard VGA driver from our support CD to your system, you can freely enjoy the benefits of dual
  • ASRock H77 Pro4/MVP | User Manual - Page 28
    Display Feature This motherboard supports surround display upgrade. With the internal VGA output support (DVI-D, D-Sub is inserted to this motherboard. 4. Install the onboard VGA driver and the add-on PCI Express VGA card driver to your system. If you have installed the drivers already, there is
  • ASRock H77 Pro4/MVP | User Manual - Page 29
    use HDCP function with this motherboard, you need to adopt a monitor that supports HDCP function as well. Therefore, you can enjoy the superior display quality with high-definition HDCP encryption contents. Please refer to the instructions below for more details about HDCP
  • ASRock H77 Pro4/MVP | User Manual - Page 30
    correctly. Step3. GND IRTX IRRX ATX+5VSB Install Multi-Angle CIR support Hot-Plug function. Please install it before you boot the system. * ASRock Smart Remote is only supported by some of ASRock's motherboards. Please refer to ASRock's website for the motherboard support list: http://www.asrock
  • ASRock H77 Pro4/MVP | User Manual - Page 31
    right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action. Please be noted that the password, date, time, user default profile, 1394 GUID and MAC address will
  • ASRock H77 Pro4/MVP | User Manual - Page 32
    jumper caps over the headers and connectors will cause permanent damage of the motherboard! Serial ATA2 Connectors (SATA2_2: see p.13, No. 17) ( SATA2_2 SATA2_5 SATA2_4 SATA2_3 These four Serial ATA2 (SATA2) connectors support SATA data cables for internal storage devices. The current SATA2
  • ASRock H77 Pro4/MVP | User Manual - Page 33
    . 26) Besides two default USB 3.0 ports on the I/O panel, there is one USB 3.0 header on this motherboard. This USB 3.0 header can support two USB 3.0 ports. This header supports an optional wireless transmitting and receiving infrared module. Consumer Infrared Module Header (4-pin CIR1) (see p.13
  • ASRock H77 Pro4/MVP | User Manual - Page 34
    panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. using the power switch. RESET (Reset Switch): Connect to the reset switch on the chassis front panel. Press the reset switch to restart the
  • ASRock H77 Pro4/MVP | User Manual - Page 35
    by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc. When wire to the ground pin. CHA_FAN1 and CHA_FAN2 supports Fan Control. Please connect the CPU fan cable to the connector and match the black wire to the ground pin
  • ASRock H77 Pro4/MVP | User Manual - Page 36
    ) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3. Pin 1-3 Connected 3-Pin Fan Installation (3-pin CPU_FAN2) (see p.13, No. 4) ATX
  • ASRock H77 Pro4/MVP | User Manual - Page 37
    Serial port Header (9-pin COM1) (see p.13, No. 28) HDMI_SPDIF Header (2-pin HDMI_SPDIF1) (see p.13, No. 29 This COM1 header supports a serial port module. HDMI_SPDIF header, providing SPDIF audio output to HDMI VGA card, allows the system to connect HDMI Digital TV/ projector/LCD devices.
  • ASRock H77 Pro4/MVP | User Manual - Page 38
    hard disk. 2.13 Serial ATA3 (SATA3) Hard Disks Installation This motherboard adopts Intel® H77 chipset that supports Serial ATA3 (SATA3) hard disks and RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage and Intel Smart Response Technology) functions for SATA3_0 and SATA3_1 connectors. It
  • ASRock H77 Pro4/MVP | User Manual - Page 39
    2.14 Hot Plug and Hot Swap Functions for SATA / SATA2 HDDs This motherboard supports Hot Plug and Hot Swap functions for SATA / SATA2 in RAID / AHCI mode. Intel® H77 chipset provides hardware support for Advanced Host controller Interface (AHCI), a new programming interface for SATA host controllers
  • ASRock H77 Pro4/MVP | User Manual - Page 40
    installed into system properly. The latest SATA / SATA2 / SATA3 driver is available on our support website: www.asrock.com 4. Make sure to use the SATA power cable & data cable, which are from our motherboard package. 5. Please follow below instructions step by step to reduce the risk of HDD crash
  • ASRock H77 Pro4/MVP | User Manual - Page 41
    supply 1x4-pin cable. Step 2 Connect SATA data cable to the motherboard's SATA2 / SATA3 connector. SATA power cable 1x4-pin power connector of attention, before you process the Hot Unplug: Please do follow below instruction sequence to process the Hot Unplug, improper procedure will cause the SATA
  • ASRock H77 Pro4/MVP | User Manual - Page 42
    in the support CD, "Guide to Intel Rapid Storage", which is located in the folder at the following path: .. \ Intel Rapid Storage Information If you want to use "Intel Rapid Storage" in Windows® environment, install "SATA2 driver" from the Support CD again so that "Intel Rapid Storage
  • ASRock H77 Pro4/MVP | User Manual - Page 43
    install Windows® XP / XP 64-bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow the steps below. AHCI mode is not supported under Windows® XP / XP 64-bit. Using SATA / SATA2 / SATA3 HDDs without NCQ function STEP 1: Set Up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen
  • ASRock H77 Pro4/MVP | User Manual - Page 44
    2.19.2 Installing Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit Without RAID Functions If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow the steps below. Using SATA / SATA2 / SATA3 HDDs with NCQ
  • ASRock H77 Pro4/MVP | User Manual - Page 45
    on the motherboard stores the Test (POST) to enter the UEFI SETUP UTILITY, otherwise, POST will continue with its test reset button on the system chassis. You may also restart by turning the system off and then back on. Because the UEFI software is constantly being updated up overclocking features
  • ASRock H77 Pro4/MVP | User Manual - Page 46
    3.1.2 Navigation Keys Please check the following table for the function description of each navigation key. Navigation Key(s) Function Description / Moves cursor left or right to select Screens / Moves cursor up or down to select items + / - To change option for the selected items
  • ASRock H77 Pro4/MVP | User Manual - Page 47
    , you can set up overclocking features. CPU Configuration CPU Turbo Ratio Use this item to change the ratio value of this motherboard. Host Clock Override (BCLK if the current CPU does not support Intel SpeedStep technology. Please note that enabling this function may reduce CPU voltage and lead
  • ASRock H77 Pro4/MVP | User Manual - Page 48
    disable CPU OverClocking Support. The default value is [Disabled]. DRAM Timing Configuration Load XMP Setting Use this to load XMP setting. Configuration options: [Auto], [Default], [Profile 1] and [Profile 2]. The default value is [Auto]. DRAM Frequency If [Auto] is selected, the motherboard
  • ASRock H77 Pro4/MVP | User Manual - Page 49
    setting. The default is [Auto]. DRAM tRP Use this item to change Row Precharge Time (tRP) Auto/Manual setting. The default is [Auto]. DRAM tRAS Use this item to change RAS# Active Time (tRAS) Auto/Manual setting. The default is [Auto]. Command Rate (CR) Use this item to change Command Rate (CR
  • ASRock H77 Pro4/MVP | User Manual - Page 50
    or disable MRC Fast Boot. The default is [Enabled]. Voltage Configuration CPU Core Voltage Use this to select CPU Core Voltage. The default value is [Auto]. CPU Load-Line Calibration CPU Load-Line Calibration helps prevent CPU voltage droop when the system is under heavy load. IGPU Voltage Use
  • ASRock H77 Pro4/MVP | User Manual - Page 51
    Use this to select VCCSA Voltage. The default value is [Auto]. User Defaults In this option, you are allowed to load and save three user defaults according to your own requirements. 51
  • ASRock H77 Pro4/MVP | User Manual - Page 52
    following items: CPU Configuration, North Bridge Configuration, South Bridge Configuration, Intel(R) Rapid Start Technology, Intel(R) Smart drive, floppy disk or hard drive and launch this tool, then you can update your UEFI only in a few clicks without preparing an additional floppy diskette or
  • ASRock H77 Pro4/MVP | User Manual - Page 53
    (C1). The C1 state is supported through the native processor instructions HLT and MWAIT and requires no hardware support from the chipset. In the C1 power state, the processor maintains the context of the system caches. CPU C3 State Support Use this to enable or disable CPU C3 (ACPI C2) report to
  • ASRock H77 Pro4/MVP | User Manual - Page 54
    Memory Protection" can prevent data pages from being used by malicious software to execute codes. This option will be hidden if the current CPU does not support No-Excute Memory Protection. Intel Virtualization Technology When this option is set to [Enabled], a VMM (Virtual Machine Architecture) can
  • ASRock H77 Pro4/MVP | User Manual - Page 55
    3.4.2 North Bridge Configuration Primary Graphics Adapter This allows you to select [Onboard], [PCI] or [PCI Express] as the boot graphic adapter priority. The default value is [PCI
  • ASRock H77 Pro4/MVP | User Manual - Page 56
    3.4.3 South Bridge Configuration Onboard HD Audio Select [Auto], [Enabled] or [Disabled] for the allows you to enable or disable the Onboard LAN feature. Deep Sleep Mobile platforms support Deep S4/S5 in DC only and desktop platforms support Deep S4/S5 in AC only. The default value is [Enabled in S5
  • ASRock H77 Pro4/MVP | User Manual - Page 57
    3.4.4 Intel(R) Rapid Start Technology Intel(R) Rapid Start Technology Use this item to enable or disable Intel(R) Rapid Start Technology. Intel(R) Rapid Start Technology is a new zero power hibernation mode which allows users to resume in just 5-6 seconds. The default is [Disabled]. 57
  • ASRock H77 Pro4/MVP | User Manual - Page 58
    (R) Smart Connect Technology Intel(R) Smart Connect Technology Use this item to enable or disable Intel(R) Smart Connect Technology. Intel(R) Smart Connect Technology keeps your e-mail and social networks, such as Twitter, Facebook, etc. updated automatically while the computer is in sleep mode. The
  • ASRock H77 Pro4/MVP | User Manual - Page 59
    SATA mode. Configuration options: [IDE Mode], [AHCI Mode] and [RAID Mode]. The default value is [AHCI Mode]. AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will improve SATA disk performance but IDE mode does not have these advantages. SATA Aggressive Link Power
  • ASRock H77 Pro4/MVP | User Manual - Page 60
    We recommend to use Intel® H77 SATA ports (SATA3_0, SATA3_1, SATA2_2, SATA2_3, SATA2_4 and SATA2_5) for your bootable devices. This will minimum your boot time and get the best performance. But if you still want to boot from ASMedia SATA3 controller, you can still enable this in UEFI. 60
  • ASRock H77 Pro4/MVP | User Manual - Page 61
    3.4.7 Super IO Configuration Serial Port Use this item to enable or disable the onboard serial port. Serial Port Address Use this item to set the address for the onboard serial port. Configuration options: [3F8h / IRQ4] and [3E8h / IRQ4]. Infrared Port Use this item to enable or disable the onboard
  • ASRock H77 Pro4/MVP | User Manual - Page 62
    -toRAM feature. Selecting [Auto] will enable this feature if the OS supports it. Check Ready Bit Use this item to enable or disable the feature ]. Please set this option to [Enabled] if you plan to use this motherboard to submit Windows® VistaTM certification. PS/2 Keyboard Power On Use this item to
  • ASRock H77 Pro4/MVP | User Manual - Page 63
    use of USB 2.0 controller. USB 3.0 Controller Use this item to enable or disable the use of USB 3.0 controller. Legacy USB Support Use this option to select legacy support for USB devices. There are four configuration options: [Enabled], [Auto], [Disabled] and [UEFI Setup Only]. The default value is
  • ASRock H77 Pro4/MVP | User Manual - Page 64
    of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. CPU Fan 1 & 2 Setting This allows you to set CPU fan 1 & 2's speed. Configuration options: [Full On] and [Automatic Mode]. The default
  • ASRock H77 Pro4/MVP | User Manual - Page 65
    3.6 Boot Screen In this section, it will display the available devices on your system for you to configure the boot settings and the boot priority. Setup Prompt Timeout This shows the number of seconds to wait for setup activation key. 65535(0XFFFF) means indefinite waiting. Bootup Num-Lock If this
  • ASRock H77 Pro4/MVP | User Manual - Page 66
    3.7 Security Screen In this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it. 66
  • ASRock H77 Pro4/MVP | User Manual - Page 67
    3.8 Exit Screen Save Changes and Exit When you select this option, the following message "Save configuration changes and exit setup?" will pop-out. Select [Yes] to save the changes and exit the UEFI SETUP UTILITY. Discard Changes and Exit When you select this option, the following message "Discard
  • ASRock H77 Pro4/MVP | User Manual - Page 68
    install the necessary drivers to activate the devices. 4.2.3 Utilities Menu The Utilities Menu shows the application softwares that the motherboard supports. Click on a specific item then follow the installation wizard to install it. 4.2.4 Contact Information If you need to contact ASRock or want to
  • ASRock H77 Pro4/MVP | User Manual - Page 69
    Installing OS on a HDD Larger Than 2TB in AHCI Mode This motherboard adopts UEFI BIOS that allows Windows® OS to be installed on a large size HDD (>2TB). Please follow the procedures below to install the operating system. 1. Please make sure
  • ASRock H77 Pro4/MVP | User Manual - Page 70
    a HDD Larger Than 2TB in RAID Mode This motherboard adopts UEFI BIOS that allows Windows® OS to be installed on Intel® RAID drivers into a USB flash disk. You can download the driver from ASRock's website and unzip the file into a USB flash disk OR copy the file from ASRock motherboard support CD
  • ASRock H77 Pro4/MVP | User Manual - Page 71
    Windows® Installation Guide to install OS. If you install Windows® 7 64-bit / VistaTM 64-bit on a large hard disk (ex. Disk volume > 2TB), it may take more time to boot into Windows® or install driver/utilities. If you encounter this problem, you will need to follow the instructions below to fix
  • ASRock H77 Pro4/MVP | User Manual - Page 72
    B. Disable "Volume Shadow Copy" service. a. Type "computer management" in the Start Menu, then press "Enter". b. Go to "Services and Applications>Services"; Then double click "Volume Shadow Copy". 72
  • ASRock H77 Pro4/MVP | User Manual - Page 73
    Disable" then Click "OK". C. Reboot your system. D. After reboot, please start to install motherboard drivers and utilities. Windows® 7 64-bit: A. Please request the hotfix KB2505454 through this link: http://support.microsoft.com/kb/2505454/ B. After installing Windows® 7 64-bit, install the hotfix
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
1
H77 Pro4/MVP
User Manual
Version 1.0
Published December 2011
Copyright©2011 ASRock INC. All rights reserved.