ASRock K7VT6 User Manual

ASRock K7VT6 Manual

Get ASRock K7VT6 PDF manuals and user guides View all ASRock K7VT6 manuals
Add to My Manuals
Save this manual to your list of manuals

ASRock K7VT6 manual content summary:

  • ASRock K7VT6 | User Manual - Page 1
    K7VT6 User Manual Version 1.0 Published June 2004 Copyright©2004 ASRock INC. All rights reserved. 1
  • ASRock K7VT6 | User Manual - Page 2
    any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for
  • ASRock K7VT6 | User Manual - Page 3
    SATA Driver Diskette 19 3. BIOS Setup 20 3.1 BIOS Setup Utility 20 3.1.1 BIOS Menu Bar 20 3.1.2 Legend Bar 21 3.2 Main Menu 21 3.3 Advanced, Security, Power, Boot, and Exit Menus 23 4. Software Support 24 4.1 Install Operating System 24 4.2 Support CD Information 24 4.2.1 Running Support
  • ASRock K7VT6 | User Manual - Page 4
    the latest memory and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com 1.1 Package Contents 1 x ASRock K7VT6 Motherboard (ATX Form Factor: 12.0-in x 7.0-in, 30.5 cm x 17.8 cm) 1 x ASRock K7VT6 Quick Installation Guide 1 x ASRock K7VT6 Support CD 1 x Ultra ATA 66/100
  • ASRock K7VT6 | User Manual - Page 5
    2 Floppy Disk Drives Audio: 5.1 Channels AC'97 Audio LAN: Speed: 802.3u (10/100 Ethernet), Supports Wake-On-LAN Hardware Monitor: CPU Temperature Sensing Motherboard Temperature Sensing CPU Overheat Shutdown to Protect CPU Life (ASRock U-COP)(see CAUTION 1) CPU Fan Tachometer Chassis Fan
  • ASRock K7VT6 | User Manual - Page 6
    must adjust "FSB Select Jumpers" according to the FSB of your AMD CPU before you set the "CPU Host Frequency" configuration as "Manual" in BIOS. See page 13 for the details of "FSB Select Jumpers" adjustment, and page 25 of "User Manual" in the Support CD for "CPU Host Frequency" configuration. 6
  • ASRock K7VT6 | User Manual - Page 7
    BIOS AGP 8X K7VT6 LAN SATA FSB400 VIA VT8237 AUDIO CODEC AUX1 CD1 FLOPPY1 PCI4 PCI5 ATA133 5.1CH SATA1 SATA2 PWR_LED1 1 1 SPEAKER1 PANEL 1 PLED PWRBTN 1 USB67 1 HDLED RST CHA_FAN1 10 11 12 13 14 15 21 20 19 18 17 16 1 PS2_USB_PWR1 Jumper 2 CPU Fan Connector (CPU_FAN1) 3 CPU Socket
  • ASRock K7VT6 | User Manual - Page 8
    1.4 ASRock I/O PlusTM 1 2 3 4 5 11 10 9 1 Parallel Port 2 RJ-45 Port 3 Line In (Light Blue) 4 Line Out (Lime) 5 Microphone (Pink) 6 2 x Shared USB 2.0 Port (USB4, USB5) 8 7 6 7 2 x USB 2.0 Port (USB0,
  • ASRock K7VT6 | User Manual - Page 9
    , peripherals, and/or components. 1. Unplug the power cord from the wall socket before touching any component. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap
  • ASRock K7VT6 | User Manual - Page 10
    . Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. Then connect the CPU fan to the CPU FAN connector (CPU_FAN1, see page 7, No. 2). For proper installation, please kindly refer to the instruction manuals of the CPU fan and heatsink vendors. 10
  • ASRock K7VT6 | User Manual - Page 11
    2.3 Installation of Memory Modules (DIMM) K7VT6 motherboard provides two 184-pin DDR (Double Data Rate) break The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly
  • ASRock K7VT6 | User Manual - Page 12
    AGP Slots) There are 5 PCI slots and 1 AGP slot on K7VT6 motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten
  • ASRock K7VT6 | User Manual - Page 13
    The CPU FSB frequency of this motherboard is both the front panel and the rear panel audio connectors can work. Clear CMOS Jumper (CLRCMOS2) setup parameters. To clear and reset the system parameters to default update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS
  • ASRock K7VT6 | User Manual - Page 14
    The jumper caps are not provided by ASRock. Please understand that ASRock does not guarantee and support the adjustment of multiplier. These jumpers setting may not apply to all multiplier-locked or even some unlocked AMD CPU. Frequencies other than the recommended CPU bus frequencies may cause the
  • ASRock K7VT6 | User Manual - Page 15
    ATA (SATA) connectors support SATA data cables for internal storage devices. The current SATA interface allows up to 1.5 Gb/s data transfer rate. Serial ATA (SATA) Data Cable Either end of the SATA data cable can be connected to the SATA hard disk or the SATA connector on the motherboard. 15
  • ASRock K7VT6 | User Manual - Page 16
    USB ports 4,5 on ASRock I/O PlusTM will not be able to function. Internal Audio Connectors (4-pin CD1, 4-pin AUX1) (CD1: see p.7 item 20) (AUX1: see p.7 item 21) AUX-R GND GND AUX-L CD-R GND GND CD-L AUX1 CD1 These connectors allow you to receive stereo audio input from sound sources such as
  • ASRock K7VT6 | User Manual - Page 17
    SPEAKER 1) (see p.7 item 17) PLED+ PLEDPWRBTN# GND 1 DUMMY RESET# GND HDLEDHDLED+ 1 SPEAKER DUMMY DUMMY +5V This connector accommodates several wire to the ground pin. CPU Fan Connector (3-pin CPU_FAN1) (see p.7 item 2) CPU_FAN_SPEED +12V GND Please connect a CPU fan cable to this connector and
  • ASRock K7VT6 | User Manual - Page 18
    4: Connect the other end of the SATA data cable to the SATA hard disk. 2.8 Hot Plug and Hot Swap Functions for SATA HDDs K7VT6 motherboard supports Hot Plug and Hot Swap functions for SATA Devices. What is Hot Plug Function? If the SATA HDDs are NOT set for RAID configuration, it is called "Hot Plug
  • ASRock K7VT6 | User Manual - Page 19
    ", which is located in the folder at the following path: .. \ SATA RAID BIOS You may also set the RAID configuration by using "VIA RAID Tool" in Windows environment. Please refer to the document in the Support CD, "Guide to VIA RAID Tool", which is located in the folder at the following path
  • ASRock K7VT6 | User Manual - Page 20
    motherboard stores the BIOS Setup Utility. You may run the BIOS Setup when you start up the computer. Please press during the PowerOn-Self-Test (POST) to enter the BIOS predetermined choices. Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions
  • ASRock K7VT6 | User Manual - Page 21
    UTILITY - VERSION 3.31a Security Power Boot Exit Oct 31 2003 Fri 20:07:40 [ Setup Help ] Month: Jan - Dec Day: 01 - 31 Year: 1980 - 2099 K7VT6 BIOS P1.00 AMD Athlon(tm) XP 2600+ 2133 MHz 128 KB 256 KB 512 MB 512 MB / 200 MHz (DDR400) None F1:Help Esc:Exit
  • ASRock K7VT6 | User Manual - Page 22
    may due to that the hard disk is too old or too new. If the hard disk was already formatted on an older system, the BIOS Setup may detect incorrect parameters. In these cases, select [User] to manually enter the IDE hard disk drive parameters. After entering the hard disk information into
  • ASRock K7VT6 | User Manual - Page 23
    is used for IDE CD/DVD drives. [ARMD]: This is used for IDE ARMD (ATAPI to determine the correct value. Maximum Capacity This field shows the drive's maximum capacity as calculated by the BIOS based on the drive information you entered. LBA Mode This allows user to select the LBA mode for a
  • ASRock K7VT6 | User Manual - Page 24
    for more information. 4.2 Support CD Information The Support CD that came with the motherboard contains necessary drivers and useful utilities that will enhance the motherboard features. 4.2.1 Running The Support CD To begin using the support CD, insert the CD into your CD-ROM drive. The
  • ASRock K7VT6 | User Manual - Page 25
    according to your AMD CPU before you use this "Manual" option as the FSB setting in BIOS setup to perform over clocking. This is not recommended unless you thoroughly know the feature. Wrong setup may cause problems during operation. DRAM Frequency If set to [Auto], the motherboard will detect the
  • ASRock K7VT6 | User Manual - Page 26
    . AGP Fast Write This allows you to enable or disable the feature of AGP fast write protocol support. PCI Delay Transaction Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is accessing 8-bit ISA cards. Disable this feature when using ISA cards that are not PCI 2.1 compliant
  • ASRock K7VT6 | User Manual - Page 27
    Vcore voltage with two levels. The default value is [Disabled]. It is not recommended to enable "Over Vcore Voltage" feature. Doing so may cause CPU damage. VCCM Voltage This item allows you to adjust DRAM voltage. Configuration options: [Auto], [High], and [Low]. The default value is [Auto]. AGP
  • ASRock K7VT6 | User Manual - Page 28
    EPP Version Parallel Port IRQ Parallel Port DMA Channel OnBoard Midi Port Midi IRQ Select OnBoard Game Port OnBoard IDE OnBoard LAN OnBoard AC' 97 Audio Auto Auto Auto ECP+EPP 1.9 Auto Auto Disabled 5 200h Enabled Enabled Auto to enable or disable the floppy drive controller. F1:Help Esc
  • ASRock K7VT6 | User Manual - Page 29
    ], [Auto] or [Enabled] for the onboard AC'97 Audio feature. System Hardware Monitor You may check the status of the hardware on your system. It allows you to monitor the parameters for CPU temperature, Motherboard temperature, CPU fan speed, and critical voltage. Advanced AMIBIOS SETUP UTILITY
  • ASRock K7VT6 | User Manual - Page 30
    password. Password Check: Select the check point for "Password Check". Configuration options: [Setup], [Always]. If [Setup] option is selected, the "Password Check" is performed before BIOS setup. If [Always] option is selected, the "Password Check" is performed before both boot-up and
  • ASRock K7VT6 | User Manual - Page 31
    This field allows you to select whether to auto-detect or disable the Suspendto-RAM feature. Select [Auto] will enable this feature if the system supports it. Repost Video on STR Resume This feature allows you to repost video on STR resume. It is recommended to enable this feature under Microsoft
  • ASRock K7VT6 | User Manual - Page 32
    /2 This enables boot-up to OS/2 operating system. Boot From Network Use this to enable or disable "boot from network" feature. VIA SATA Raid Utility Use this to enable or disable VIA VT8237 SATA Raid BIOS Utility during POST. Boot Device Priority This allows you to set the boot device priority. 32
  • ASRock K7VT6 | User Manual - Page 33
    the sub-menu, the message "Save current settings and exit" will appear. If you press , it will save the current settings and exit the BIOS SETUP Utility. Exit Discarding Changes After you enter the submenu, the message "Quit without saving changes" will appear. If you press , you will
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
1
K7VT6
User Manual
Version 1.0
Published June 2004
Copyright©2004 ASRock INC. All rights reserved.