ASRock M266A R3.0 User Manual - Page 24

3.9 Peripheral Setup AMIBIOS SETUP UTILITY - VERSION 3.31a Peripheral Configuration [ Setup Help ] OnBoard FDC OnBoard Serial Port OnBoard Infrared Port OnBoard Parallel Port Parallel Port Mode EPP Version Parallel Port IRQ Parallel Port DMA Channel OnBoard Midi Port Midi IRQ Select OnBoard Game Port OnBoard IDE OnBoard LAN OnBoard AC' 97 Audio OnBoard MC' 97 Modem Auto Auto Disabled Auto ECP + EPP 1.9 Auto Auto Disabled 5 200h Both Enabled Auto Auto to enable or disable the floppy drive controller. F1:Help Esc:Previous Menu :Select Item +/-:Change Values Enter:Select Sub-Menu F9:Setup Defaults F10:Save & Exit OnBoard FDC Use this to enable or disable floppy drive controller. OnBoard Serial Port Use this to set addresses for the onboard serial ports or disable serial ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 /COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4]. OnBoard Infrared Port This allows you to enable or disable the onboard infrared port feature. Select [Auto] will enable this feature if the infrared module is installed. OnBoard Parallel Port Select Parallel Port address or disable Parallel Port. Configuration options: [Auto], [Disabled], [378], [278]. Parallel Port Mode Set the operation mode of the parallel port. The default value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP version in the following item, "EPP Version". OnBoard Midi Port Select address for Midi Port or disable Midi Port. Configuration options: [Disabled], [330], [300], [290], [292]. OnBoard Game Port Select address for Game Port or disable Game Port. Configuration options: [Disabled], [200h], [208h]. 24