ASRock P45DE3 User Manual

ASRock P45DE3 Manual

Get ASRock P45DE3 PDF manuals and user guides View all ASRock P45DE3 manuals
Add to My Manuals
Save this manual to your list of manuals

ASRock P45DE3 manual content summary:

  • ASRock P45DE3 | User Manual - Page 1
    P45DE3 User Manual Version 1.0 Published July 2009 Copyright©2009 ASRock INC. All rights reserved. 1
  • ASRock P45DE3 | User Manual - Page 2
    purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate
  • ASRock P45DE3 | User Manual - Page 3
    Installing Windows® 2000 / XP / XP 64-bit Without RAID Functions 31 2.15.2 Installing Windows® VistaTM / VistaTM 64-bit Without RAID Functions 32 2.16 Untied Overclocking Technology 33 3 BIOS SETUP UTILITY 34 3.1 Introduction 34 3.1.1 BIOS Menu Bar 34 3.1.2 Navigation Keys 35 3.2 Main Screen
  • ASRock P45DE3 | User Manual - Page 4
    56 3.6 Boot Screen 57 3.6.1 Boot Settings Configuration 57 3.7 Security Screen 58 3.8 Exit Screen 59 4 Software Support 60 4.1 Install Operating System 60 4.2 Support CD Information 60 4.2.1 Running Support CD 60 4.2.2 Drivers Menu 60 4.2.3 Utilities Menu 60 4.2.4 Contact Information 60 4
  • ASRock P45DE3 | User Manual - Page 5
    guide to BIOS setup and information of the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock
  • ASRock P45DE3 | User Manual - Page 6
    Platform CPU Chipset Memory Expansion Slot Audio LAN Rear Panel I/O Connector - ATX Form Factor: 12.0-in x 8.0-in, 30.5 cm x 20.3 cm - LGA 775 for Intel® CoreTM 2 Extreme / CoreTM 2 Quad / CoreTM 2 Duo / Pentium® Dual Core / Celeron® Dual Core / Celeron®, supporting Penryn Quad Core Yorkfield and
  • ASRock P45DE3 | User Manual - Page 7
    , SB Core, SB 1.1V, VTT, PLL Voltage Multi-adjustment - Supports I. O. T. (Intelligent Overclocking Technology) - Supports Smart BIOS Support CD - Drivers, Utilities, AntiVirus Software (Trial Version) Unique Feature - ASRock OC Tuner (see CAUTION 10) - Intelligent Energy Saver (see CAUTION
  • ASRock P45DE3 | User Manual - Page 8
    adopt may be overclocked to FSB2000 MHz. 2. About the setting of "Hyper Threading Technology", please check page 47. 3. This motherboard supports Untied Overclocking Technology. Please read "Untied Overclocking Technology" on page 33 for details. 4. This motherboard supports Dual Channel Memory
  • ASRock P45DE3 | User Manual - Page 9
    ASRock website: http://www.asrock.com 12. ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This convenient BIOS update tool allows you to update system BIOS AHCI function is not supported under Windows® 2000 motherboard and an EuP ready power supply are required. According to Intel
  • ASRock P45DE3 | User Manual - Page 10
    -45 Top: SIDE SPK Center: REAR SPK Bottom: CTR BASS 37 LAN PHY 36 Intel P45 Top: LINE IN Center: FRONT Bottom: MIC IN Chipset CD1 35 PWR_FAN1 34 PCIE1 33 AUDIO CODEC PCIE2 HD_AUDIO1 32 1 PCI Express 2.0 P45DE3 FSB2000 8 CHA_FAN1 IDE1 9 30.5cm (12.0 in) 31 30 29 28 27 EuP Ready
  • ASRock P45DE3 | User Manual - Page 11
    below for connection details in accordance with the type of speaker you use. TABLE for Audio Output Connection Audio Output Channels Front Speaker Rear Speaker Central / Bass Side Speaker (No. 7) (No. 4) (No. 5) (No. 3) 2 V -- -- -- 4 V V -- -- 6 V V V -- 8 V V V V 11
  • ASRock P45DE3 | User Manual - Page 12
    To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find "VIA HD Audio Deck" tool on your system. Please follow below instructions according to the OS you install. For Windows® 2000 / XP / XP
  • ASRock P45DE3 | User Manual - Page 13
    Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your
  • ASRock P45DE3 | User Manual - Page 14
    2.3 CPU Installation For the installation of Intel 775-LAND CPU, please follow the steps below. 775-Pin Socket Overview Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the
  • ASRock P45DE3 | User Manual - Page 15
    finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center cap. 2. This cap must be placed if returning the motherboard for after service. Step 4. Close the socket: Step 4-1. Rotate the load plate onto the IHS.
  • ASRock P45DE3 | User Manual - Page 16
    2.4 Installation of CPU Fan and Heatsink This motherboard is equipped with 775-Pin socket that supports Intel 775-LAND CPU. Please adopt the type of heatsink and cooling fan compliant with Intel 775-LAND CPU to dissipate heat. Before you installed the heatsink, you need to spray thermal interface
  • ASRock P45DE3 | User Manual - Page 17
    2.5 Installation of Memory Modules (DIMM) This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install identical (the same brand, speed, size and chiptype) DDR3 DIMM pair in
  • ASRock P45DE3 | User Manual - Page 18
    matches the break on the slot. notch break notch break The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining
  • ASRock P45DE3 | User Manual - Page 19
    the expansion card and make necessary hardware settings for the card before you start the installation. Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis). Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws for later use. Step
  • ASRock P45DE3 | User Manual - Page 20
    short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clearCMOS action. 20
  • ASRock P45DE3 | User Manual - Page 21
    to the motherboard connect the black end to the IDE devices 80-conductor ATA 66/100/133 cable Note: Please refer to the instruction of your see p.10, No. 17) These six Serial ATAII (SATAII) connectors support SATA data cables for internal storage devices. The current SATAII interface allows up
  • ASRock P45DE3 | User Manual - Page 22
    GND P+6 P-6 USB_PWR 1 Infrared Module Header (5-pin IR1) (see p.10 No. 28) Internal Audio Connectors (4-pin CD1) (see p.10 No. 35) IRTX +5V DUMMY 1 GND IRRX CD USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. This connector supports a Trusted Platform Module (
  • ASRock P45DE3 | User Manual - Page 23
    audio devices. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual for HD audio panel only. You don't need to connect them for AC'97 audio panel. E. Enter BIOS Setup
  • ASRock P45DE3 | User Manual - Page 24
    fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3. Pin 1-3 Connected 3-Pin Fan Installation ATX Power Connector (24
  • ASRock P45DE3 | User Manual - Page 25
    5V HDMI_SPDIF Cable (Optional) C B A HDMI_SPDIF header, providing SPDIF audio output to HDMI VGA card, allows the system to connect HDMI Digital connect the black end (A) of HDMI_SPDIF cable to the HDMI_SPDIF header on the motherboard. Then connect the white end (B or C) of HDMI_SPDIF cable to the
  • ASRock P45DE3 | User Manual - Page 26
    25. For the pin definition of HDMI_SPDIF connectors on HDMI VGA card, please refer to the user manual of HDMI VGA card vendor. Incorrect connection may cause permanent damage to this motherboard and the HDMI VGA card. Step 3. Connect the white end (B or C) of HDMI_SPDIF cable to the HDMI_SPDIF
  • ASRock P45DE3 | User Manual - Page 27
    guide. Some default setting of SATAII hard disks may not be at SATAII mode, which operate with the best performance. In order to enable SATAII function, please follow the below instruction 's website for details: http://www.hitachigst.com/hdd/support/download.htm The above examples are just for your
  • ASRock P45DE3 | User Manual - Page 28
    Serial ATAII (SATAII) Hard Disks Installation P45DE3 adopts Intel® ICH10 south bridge chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII hard disks on this motherboard for internal storage devices. This section will guide you to install the SATA
  • ASRock P45DE3 | User Manual - Page 29
    is installed into system properly. The latest SATA / SATAII driver is available on our support website: www.asrock.com 4. Make sure to use the SATA power cable & data cable, which are from our motherboard package. 5. Please follow below instructions step by step to reduce the risk of HDD crash or
  • ASRock P45DE3 | User Manual - Page 30
    cable to (White) to the power supply 1x4-pin cable. the motherboard's SATAII connector. SATA power cable 1x4-pin power connector (White) Step attention, before you process the Hot Unplug: Please do follow below instruction sequence to process the Hot Unplug, improper procedure will cause the SATA
  • ASRock P45DE3 | User Manual - Page 31
    driver is not provided by the chipset vendor, AHCI function is not supported under Windows® 2000. 2.15.1 Installing Windows® 2000 / XP / XP 64-bit Without RAID HDDs without RAID functions, please follow below steps. Using SATA / SATAII HDDs with NCQ function STEP 1: Set Up BIOS. A. Enter BIOS SETUP
  • ASRock P45DE3 | User Manual - Page 32
    the instruction to install Windows® VistaTM / VistaTM 64-bit OS on your system. When you see "Where do you want to install Windows?" page, please insert the ASRock Support CD into your optical drive, and click the "Load Driver" button on the left on the bottom to load the Intel® AHCI drivers. Intel
  • ASRock P45DE3 | User Manual - Page 33
    Technology This motherboard supports Untied Overclocking Technology, which means during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS setup to set the selection from [Auto] to [Manual
  • ASRock P45DE3 | User Manual - Page 34
    BIOS FWH chip on the motherboard stores the BIOS SETUP UTILITY. You may run the BIOS SETUP UTILITY when you start up the computer. Please press or during the Power-On-Self-Test (POST) to enter the BIOS Because the BIOS software is constantly being updated, the following BIOS setup screens
  • ASRock P45DE3 | User Manual - Page 35
    Overview System Time System Date [14:00:09] [Wed 07/29/2009] BIOS Version : P45DE3 P1.00 Processor Type : Intel (R) Core (TM) 2 Duo CPU E8400 @ 3.00GHz (64bit) Processor Speed : 4400MHz Microcode Update : 1067A/A07 Cache Size : 6144KB Total Memory DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2 : 2048MB
  • ASRock P45DE3 | User Manual - Page 36
    Configuration ASRock VDrop Control [With VDrop] Overclocking may cause damage to your CPU and motherboard. Overclock Mode Use this to select Overclock Mode. Configuration options: [Auto], [Manual], [I.O.T.] and [Optimized]. The default value is [Auto]. If you select [Manual], Untied Overclocking
  • ASRock P45DE3 | User Manual - Page 37
    status is unlocked, you will find this item appear to allow you changing the ratio value of this motherboard. DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. You may select [Auto], [533MHz (DDR3 1066
  • ASRock P45DE3 | User Manual - Page 38
    DRAM Timing Configuation BIOS SETUP UTILITY OC Tweaker Standard Memory Settings XMP Technology [Auto] Profile 1 : DDR3 2000 7-8-7-20 1.65V Standard Memory Settings : 7-8-7-20-78-10-8-7-8 DRAM tCL [Auto] DRAM
  • ASRock P45DE3 | User Manual - Page 39
    DRAM tRTP This controls the number of DRAM clocks for TRTP. Min: 2. Max: 13. The default value is [Auto]. 39
  • ASRock P45DE3 | User Manual - Page 40
    DRAM RCOMP and tRD Configuration BIOS SETUP UTILITY OC Tweaker DRAM RCOMP Settings DRAM CH0 RCOMP Settings : 54-0-11-6-6-6-6 DRAM CH0 RCOMP ODT DRAM CH0 G0 (Data) DRAM CH0 G1 (Command) [
  • ASRock P45DE3 | User Manual - Page 41
    DRAM CH1 G1 (Command) This controls the number of DRAM CH1 G1 (Command). Min: 1. Max: 15. The default value is [Auto]. DRAM CH1 G2 (Control1) This controls the number of DRAM CH1 G2 (Control1). Min: 1. Max: 15. The default value is [Auto]. DRAM CH1 G3 (Control2) This controls the number of DRAM CH1
  • ASRock P45DE3 | User Manual - Page 42
    DRAM DLL SKEW Settings BIOS SETUP UTILITY OC Tweaker DRAM DLL SKEW Settings DRAM CH0 CLKSET0 SKEW Info:8-2-0-0-0-734 DRAM CH0 CLKSET0 SKEW [Auto] DRAM CH0 CLKSET1 SKEW Info:9-5-0-0-0-856
  • ASRock P45DE3 | User Manual - Page 43
    DRAM CH1 CMD SKEW This controls the number of DRAM CH1 CMD SKEW. Configuration options: [Auto], [8] to [827]. The default value is [Auto]. DRAM CH1 CTRL0 SKEW This controls the number of DRAM CH1 CTRL0 SKEW. Configuration options: [Auto], [8] to [827]. The default value is [Auto]. DRAM CH1 CTRL1
  • ASRock P45DE3 | User Manual - Page 44
    Voltage Settings BIOS SETUP UTILITY OC Tweaker Voltage Settings CPU Voltage DRAM Voltage GTLRef Voltage NB Voltage NB GTL Ref. Voltage SB Core Voltage SB 1.1V Voltage VTT Voltage PLL Voltage [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] Options Auto Manual Overdrive Offset +F1
  • ASRock P45DE3 | User Manual - Page 45
    VDrop Control Use this to enable or disable ASRock VDrop control. Configuration options: [With VDrop] and [Without VDrop]. The default value is [With VDrop]. Would you like to save current setting user defaults? In
  • ASRock P45DE3 | User Manual - Page 46
    Setting wrong values in this section may cause the system to malfunction. ASRock Instant Flash ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This convenient BIOS update tool allows you to update system BIOS without entering operating systems first like MS-DOS or Windows®. Just
  • ASRock P45DE3 | User Manual - Page 47
    Halt State (C1). The C1 state is supported through the native processor instructions HLT and MWAIT and requires no hardware support from the chipset. In the C1 power state, the processor maintains the context of the system caches. Intel (R) Virtualization tech. When this option is set to [Enabled
  • ASRock P45DE3 | User Manual - Page 48
    VistaTM and want to enable this function, please set this item to [Enabled]. This item will be hidden if the current CPU does not support Intel (R) SpeedStep(tm) tech.. Please note that enabling this function may reduce CPU voltage and lead to system stability or compatibility issue with some power
  • ASRock P45DE3 | User Manual - Page 49
    3.4.2 Chipset Configuration BIOS SETUP UTILITY Advanced Chipset Settings Intelligent Energy Saver Primary Graphics Adapter Onboard HD Audio Front Panel OnBoard Lan CIR10 Field 1 [Disabled] [PCI] [Auto] [Enabled] [Enabled] [Enabled] Options Disabled Enabled +F1 F9 F10 ESC Select Screen Select
  • ASRock P45DE3 | User Manual - Page 50
    3.4.3 ACPI Configuration BIOS SETUP UTILITY Advanced ACPI Configuration Suspend To RAM Restore on AC/Power Loss Ring-In Power On PCI Devices Power On PS / 2 Keyboard Power On RTC Alarm Power On EUP Support ACPI HPET Table [Disabled] [Power Off] [Disabled] [Disabled] [Disabled] [Disabled] [Auto] [
  • ASRock P45DE3 | User Manual - Page 51
    plan to use this motherboard to submit Windows® VistaTM certification. 3.4.4 Storage Configuration BIOS SETUP UTILITY Advanced default value is [Enabled]. AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will improve SATA disk performance instruction. 51
  • ASRock P45DE3 | User Manual - Page 52
    BIOS SETUP UTILITY Advanced Primary IDE Master Device Vendor Size LBA Mode Block Mode PIO Mode Async DMA Ultra DMA S.M.A.R.T. Type LBA/Large Mode Block (Multi-Sector Transfer) PIO Mode DMA Mode S.M.A.R.T. 32Bit Data Transfer :Hard Disk :ST340014A :40.0 GB :Supported :16Sectors :4 :MultiWord DMA-2
  • ASRock P45DE3 | User Manual - Page 53
    need to wait ready longer. Configuration options: [0], [5], [10], [15], [20], [25], [30] and [35]. The default value is [35]. 3.4.5 PCIPnP Configuration BIOS SETUP UTILITY Advanced Advanced PCI / PnP Settings PCI Latency Timer PCI IDE BusMaster [32] [Enabled] Value in units of PCI clocks for
  • ASRock P45DE3 | User Manual - Page 54
    SETUP UTILITY Advanced Configure Super IO Chipset OnBoard Floppy Controller Serial Port Address Infrared Port Address [Enabled] [3F8 / IRQ4] [Disabled] Allow BIOS to Enable or Disable Floppy Controller. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and
  • ASRock P45DE3 | User Manual - Page 55
    Use this item to enable or disable the USB 2.0 support. Legacy USB Support Use this option to select legacy support for USB devices. There are four configuration options: [Enabled], [Auto], [Disabled] and [BIOS Setup Only]. The default value is [Enabled]. Please refer to below descriptions for
  • ASRock P45DE3 | User Manual - Page 56
    monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit Hardware Health Event Monitoring CPU
  • ASRock P45DE3 | User Manual - Page 57
    F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. 3.6.1 Boot Settings Configuration BIOS SETUP UTILITY Boot Boot Settings Configuration Full Screen Logo AddOn ROM Display Boot Logo Boot From Onboard LAN Bootup Num-Lock [Enabled
  • ASRock P45DE3 | User Manual - Page 58
    option "Full Screen Logo". Configuration options: [Auto], [EuP], [Scenery] and [ASRock]. The default value is [Auto]. Boot From Onboard LAN Use this item to enable system. For the user password, you may also clear it. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit
  • ASRock P45DE3 | User Manual - Page 59
    . Discard Changes When you select this option, it will pop-out the following message, "Discard changes?" Select [OK] to discard all changes. Load BIOS Defaults Load BIOS default values for all the setup questions. F9 key can be used for this operation. Load Performance Setup Default (IDE/SATA) This
  • ASRock P45DE3 | User Manual - Page 60
    install the necessary drivers to activate the devices. 4.2.3 Utilities Menu The Utilities Menu shows the applications software that the motherboard supports. Click on a specific item then follow the installation wizard to install it. 4.2.4 Contact Information If you need to contact ASRock or want to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
1
P45DE3
User Manual
Version 1.0
Published July 2009
Copyright©2009 ASRock INC. All rights reserved.