ASRock PV530 User Manual

ASRock PV530 Manual

ASRock PV530 manual content summary:

  • ASRock PV530 | User Manual - Page 1
    PV530 User Manual Version 1.0 Published April 2010 Copyright©2010 ASRock INC. All rights reserved. 1
  • ASRock PV530 | User Manual - Page 2
    purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate
  • ASRock PV530 | User Manual - Page 3
    Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks Installation 19 2.9 Driver Installation Guide 20 2.10 Untied Overclocking Technology 20 3 BIOS SETUP UTILITY 21 3.1 Introduction 21 3.1.1 BIOS Menu Bar 21 3.1.2 Navigation Keys 22 3.2 Main Screen 22 3.3 OC Tweaker Screen 23 3.4 Advanced
  • ASRock PV530 | User Manual - Page 4
    4 Software Support 39 4.1 Install Operating System 39 4.2 Support CD Information 39 4.2.1 Running Support CD 39 4.2.2 Drivers Menu 39 4.2.3 Utilities Menu 39 4.2.4 Contact Information 39 4
  • ASRock PV530 | User Manual - Page 5
    design conforming to ASRock's commitment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD. Because the
  • ASRock PV530 | User Manual - Page 6
    Graphics Audio LAN Rear Panel I/O Connector - Micro ATX Form Factor: 8.5-in x 6.7-in, 21.6 cm x 17.0 cm - Solid Capacitor for CPU power - VIA® PV530 Processor (1.8 GHz) - Supports FSB800 MHz - Supports Untied Overclocking Technology (see CAUTION 1) - VIA® VX900 - 1 x DDR3 DIMM slot - Supports DDR3
  • ASRock PV530 | User Manual - Page 7
    Feature - 4Mb AMI BIOS - AMI Legal BIOS - Supports "Plug and Play" - ACPI 1.1 Compliance Wake Up Events - Supports jumperfree - AMBIOS 2.3.1 Support Support CD - Drivers, Utilities, AntiVirus Software (Trial Version), ASRock Software Suite (CyberLink DVD Suite - OEM and Trial; Creative
  • ASRock PV530 | User Manual - Page 8
    ASRock OC Tuner. ASRock website: http://www.asrock.com 6. ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This convenient BIOS update tool allows you to update system BIOS check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again
  • ASRock PV530 | User Manual - Page 9
    regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1.00W in off mode condition. To meet EuP standard, an EuP ready motherboard and an EuP ready power supply are required. According to Intel
  • ASRock PV530 | User Manual - Page 10
    LAN PHY HD_AUDIO1 1 SATAII_2 SATAII_1 PCIE1 AUDIO CODEC Super IO PCI1 Designed in Taipei 1 USB6_7 1 USB4_5 1 USB_PWR3 CLRCMOS1 CMOS Battery 4Mb BIOS PANEL 1 PLED PWRBTN SPEAKER1 1 1 HDLED RESET CHA_FAN1 15 14 13 12 11 RoHS PV530 8 9 10 1 Power Fan Connector (PWR_FAN1) 13 Chassis
  • ASRock PV530 | User Manual - Page 11
    , you will find "VIA HD Audio Deck" tool on your system. Please follow below instructions according to the OS you install. For Windows® XP OS: Please click "VIA HD Audio Deck" icon , and click "Speaker". Then you are allowed to select "2 Channel" or "4 Channel". Click "Power" to save your
  • ASRock PV530 | User Manual - Page 12
    Installation PV530 is a Micro ATX form factor (8.5" x 6.7", 21.6 x 17.0 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure
  • ASRock PV530 | User Manual - Page 13
    /DDR2 memory module into DDR3 slot; otherwise, this motherboard and DIMM may be damaged. 2. Please do not use the DDR2 slots and DDR3 slot at the same time. You can choose to install either DDR2 or DDR3 memory module. Installing a DIMM Please make sure to disconnect power supply before adding or
  • ASRock PV530 | User Manual - Page 14
    supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis). Step 3. Remove
  • ASRock PV530 | User Manual - Page 15
    current provided by power supply. USB_PWR2 power supply. After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS
  • ASRock PV530 | User Manual - Page 16
    on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. Front Panel Audio Header audio devices. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual
  • ASRock PV530 | User Manual - Page 17
    and OUT_RET are for HD audio panel only. You don't need to connect them for AC'97 audio panel. System Panel Header (9-pin Power Connector 24 (24-pin ATXPWR1) 12 (see p.10, No. 3) 13 Please connect an ATX power 1 supply to this connector. Though this motherboard provides 24-pin ATX power
  • ASRock PV530 | User Manual - Page 18
    guide. Some default setting of SATAII hard disks may not be at SATAII mode, which operate with the best performance. In order to enable SATAII function, please follow the below instruction website for details: http://www.hitachigst.com/hdd/support/download.htm The above examples are just for your
  • ASRock PV530 | User Manual - Page 19
    ATAII (SATAII) Hard Disks Installation This motherboard adopts VIA® VX900 chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII hard disks on this motherboard for internal storage devices. This section will guide you to install the SATA / SATAII
  • ASRock PV530 | User Manual - Page 20
    page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly. 2.10 Untied Overclocking Technology This motherboard supports Untied Overclocking Technology, which means during overclocking, FSB enjoys better margin due to
  • ASRock PV530 | User Manual - Page 21
    Introduction This section explains how to use the BIOS SETUP UTILITY to configure your system. The BIOS FWH chip on the motherboard stores the BIOS SETUP UTILITY. You may run the BIOS SETUP UTILITY when you start up the computer. Please press during the Power-On-Self-Test (POST) to enter the
  • ASRock PV530 | User Manual - Page 22
    Monitor Boot Security Exit System Overview System Time System Date [14:00:09] [Fri 05/07/2010] BIOS Version Processor Type Processor Speed Cache Size : PV530 P1.00 : VIA PV530 Processor 1800MHz : 1800MHz : 128KB Use [Enter], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure
  • ASRock PV530 | User Manual - Page 23
    OC Tweaker screen, you can set up overclocking features. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security FSB frequency. DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. You may
  • ASRock PV530 | User Manual - Page 24
    DRAM Timing Configuration BIOS SETUP UTILITY OC Tweaker DRAM Timing Configuration [Auto]. DRAM tRAS This controls the number of DRAM clocks for TRAS. Configuration options: [15T] to [30T] for DDR3, [5T] to [20T] for DDR2. The default value is [Auto]. DRAM tRFC This controls the number of DRAM
  • ASRock PV530 | User Manual - Page 25
    default value of this feature is [Auto]. VCCM(DRAM) Voltage Use this to select VCCM(DRAM) Voltage. Configuration options: [1.48V] to [1.88V] for DDR3, [1.80V] to [2.21V] for DDR2. The default value of this feature is [Auto]. Chipset Voltage Use this to select chipset Voltage. Configuration options
  • ASRock PV530 | User Manual - Page 26
    cause system to malfunction. CPU Configuration Chipset Configuration ACPI Configuration Storage Configuration PCIPnP Configuration SuperIO Configuration USB Configuration BIOS Update Utility ASRock Instant Flash Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10
  • ASRock PV530 | User Manual - Page 27
    BIOS SETUP UTILITY Advanced Configure advanced CPU settings VIA Pv530 Processor 1800MHz Frequency :1.80GHz Cache L1 :128 KB Cache L2 :128 KB Ratio Status:Unlocked (Min:04, Max:09) Ratio Actual Value:9 CPU Ratio Setting CMPXCHG8B instruction support VIA Processor Power Management
  • ASRock PV530 | User Manual - Page 28
    3.4.2 Chipset Configuration BIOS SETUP UTILITY Advanced Chipset Settings Primary Graphics Adapter Onboard VGA Share Memory PCIE Target Link Speed OnBoard Lan Onboard HD Audio Front Panel [PCI] [Auto] [Auto] [Enabled] [Auto] [Auto] Select the type of primary VGA in case of multiple video
  • ASRock PV530 | User Manual - Page 29
    if the system supports it. Check Ready Bit Use this item to enable or disable the feature Check Ready Bit. Restore on AC/Power Loss This allows you to set the power state after an unexpected AC/Power loss. If [Power Off] is selected, the AC/Power remains off when the power recovers. If [Power On] is
  • ASRock PV530 | User Manual - Page 30
    Transfer :Hard Disk :ST340014A :40.0 GB :Supported :16Sectors :4 :MultiWord DMA-2 :Ultra DMA-5 :Supported [Auto] [Auto] [Auto] [Auto] [ automatically detect the hard disk drive. After selecting the hard disk information into BIOS, use a disk utility, such as FDISK, to partition and format the
  • ASRock PV530 | User Manual - Page 31
    [CD/DVD]: This is used for IDE CD/DVD drives. [ARMD]: This is used for IDE ARMD (ATAPI Removable Media Device), such as MO. LBA/Large Mode Use this item to select the LBA/Large mode for a hard disk > 512 MB under DOS and Windows; for Netware and UNIX user, select [Disabled] to disable the LBA/Large
  • ASRock PV530 | User Manual - Page 32
    3.4.5 PCIPnP Configuration BIOS SETUP UTILITY Advanced Advanced PCI / PnP Settings PCI Latency Timer PCI IDE BusMaster [32] [Enabled] Value in units of PCI clocks for PCI device latency
  • ASRock PV530 | User Manual - Page 33
    Parallel Port Address Parallel Port Mode EPP Version ECP Mode DMA Channel Parallel Port IRQ [3F8 / IRQ4] [378] [ECP + EPP] [1.9] [DMA3] [IRQ7] Allow BIOS to Enable or Disable Floppy Controller. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit
  • ASRock PV530 | User Manual - Page 34
    is recommended to select [Disabled] to enter OS. [BIOS Setup Only] - USB devices are allowed to use only under BIOS setup and Windows / Linux OS. USB Keyboard/Remote Power On Use this item to enable or disable USB Keyboard/Remote Power On on the system. USB Mouse Power On Use this item to enable or
  • ASRock PV530 | User Manual - Page 35
    temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit Hardware Health Event Monitoring CPU Temperature M / B Temperature CPU Fan Speed Chassis Fan Speed Power
  • ASRock PV530 | User Manual - Page 36
    v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. 3.6.1 Boot Settings Configuration BIOS SETUP UTILITY Boot Boot Settings Configuration Full Screen Logo AddOn ROM Display Boot Logo Boot Logo". Configuration options: [Auto], [EuP], [Scenery] and [ASRock]. The default value is [Auto]. 36
  • ASRock PV530 | User Manual - Page 37
    this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit Security Settings Supervisor Password : Not Installed User Password : Not Installed Change
  • ASRock PV530 | User Manual - Page 38
    and exit setup?" Select [OK] to save the changes and exit the BIOS SETUP UTILITY. Discard Changes and Exit When you select this option, it message, "Discard changes and exit setup?" Select [OK] to exit the BIOS SETUP UTILITY without saving any changes. Discard Changes When you select this option
  • ASRock PV530 | User Manual - Page 39
    install the necessary drivers to activate the devices. 4.2.3 Utilities Menu The Utilities Menu shows the applications software that the motherboard supports. Click on a specific item then follow the installation wizard to install it. 4.2.4 Contact Information If you need to contact ASRock or want to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

1
PV530
User Manual
Version 1.0
Published April 2010
Copyright©2010 ASRock INC. All rights reserved.