ASRock X299M Extreme4 RAID Installation Guide
ASRock X299M Extreme4 Manual
 |
View all ASRock X299M Extreme4 manuals
Add to My Manuals
Save this manual to your list of manuals |
ASRock X299M Extreme4 manual content summary:
- ASRock X299M Extreme4 | RAID Installation Guide - Page 1
Installation 2 1.1 Serial ATA (SATA) Hard Disks Installation 2 2. Guide to RAID Configurations 3 2.1 Introduction of RAID 3 2.2 RAID Array Using UEFI Setup Utility 13 2.4.3 Configuring a RAID array Using Intel RAID BIOS....... 18 3. Installing Windows® on a HDD under 2TB in RAID mode 22 - ASRock X299M Extreme4 | RAID Installation Guide - Page 2
1.1 Serial ATA (SATA) Hard Disks Installation Intel chipset supports Serial ATA (SATA) hard disks with RAID functions, including RAID 0, RAID 1, RAID 5, RAID 10 and Intel Rapid Storage. Please read the RAID configurations in this guide carefully according to the Intel southbridge chipset that your - ASRock X299M Extreme4 | RAID Installation Guide - Page 3
Intel southbridge chipset that integrates RAID controller supporting RAID 0 / RAID 1/ Intel Rapid Storage / RAID 10 / RAID 5 function with four independent Serial ATA (SATA) channels. This section will introduce the basic knowledge of RAID, and the guide to configure RAID 0 / RAID 1/ Intel Rapid - ASRock X299M Extreme4 | RAID Installation Guide - Page 4
Intel Rapid Storage The Intel Rapid Storage technology supported allows you to create a RAID 0 and RAID 1 set using only two identical hard disk drives. The Intel Rapid Storage technology creates two partitions on each - ASRock X299M Extreme4 | RAID Installation Guide - Page 5
RAID 5 RAID 5 stripes both data and parity information across three or more hard disk drives. Among the advantages of RAID 5 configuration include better HDD performance, fault tolerance, and higher storage capacity. The RAID 5 configuration is best suited for transaction processing, relational - ASRock X299M Extreme4 | RAID Installation Guide - Page 6
attached to remapable PCIe slot or PCIe M.2 connector. * The PCIe Storage device must be AHCI-controller based. * System must be in RAID mode. * The system BIOS must use the Intel® Rapid Storage Technology UEFI drive option, Legacy OROM doesn - ASRock X299M Extreme4 | RAID Installation Guide - Page 7
BIOS setup utility. Go to Advanced Storage Configuration and set SATA Mode Selection to [RAID]. Press to save the configuration changes and exit setup. STEP 2: Use ASRock Easy RAID Installer Easy RAID Installer can copy the RAID driver from a support the onscreen instruction to complete the - ASRock X299M Extreme4 | RAID Installation Guide - Page 8
Windows 7 Under 2.2 TB Not supported Option ROM Setting UEFI SETUP UTILITY\Boot\ CSM [Launch Storage n/a OpROM policy] = [UEFI only] Required RAID Utility UEFI Setup Utility Intel® RAID BIOS setup utility OS HDD Capacity Ultra Fast Boot Windows 10 / 8.1 / 8 Under 2.2 Over 2.2 TB TB - ASRock X299M Extreme4 | RAID Installation Guide - Page 9
2.4.1 Configuring a RAID array Using UEFI Setup Utility STEP 1: Enter the UEFI Setup Utility by pressing or right after you power on the computer. STEP 2: Go to Boot CSM and set Launch Storage OpROM policy to [UEFI only]. STEP 3: Go to Advanced Storage Configuration and set SATA Mode - ASRock X299M Extreme4 | RAID Installation Guide - Page 10
STEP 5: Key-in a a volume name and press , or simply press to accept the default name. STEP 6: Select your desired RAID Level and press . 10 - ASRock X299M Extreme4 | RAID Installation Guide - Page 11
STEP 7: Select the hard drives to be included in the RAID array and press . STEP 8: Select a stripe size for the RAID array and press . 11 - ASRock X299M Extreme4 | RAID Installation Guide - Page 12
a RAID volume, select the option Delete on the RAID volume info page and press . *Please note that the UEFI screenshots shown in this installation guide are for reference only. The actual screen may differ by model on the RAID volume info page and press . 12 - ASRock X299M Extreme4 | RAID Installation Guide - Page 13
2.4.2 Configuring a PCIE SSD RAID Array Using UEFI Setup Utility Caution: Please use identical PCIE SSDs that are the same type and volume. STEP 1: Enter the UEFI Setup Utility by pressing or right after you power on the computer. STEP 2: Go to Advanced Storage Configuration and - ASRock X299M Extreme4 | RAID Installation Guide - Page 14
STEP 3: Enter Intel(R) Rapid Storage Technology in Advanced page. STEP 4: Select the option Create RAID Volume and press . 14 - ASRock X299M Extreme4 | RAID Installation Guide - Page 15
STEP 5: Key-in a a volume name and press , or simply press to accept the default name. STEP 6: Select your desired RAID Level and press . 15 - ASRock X299M Extreme4 | RAID Installation Guide - Page 16
STEP 7: Select the hard drives to be included in the RAID array and press . STEP 8: Select a stripe size for the RAID array and press . 16 - ASRock X299M Extreme4 | RAID Installation Guide - Page 17
a RAID volume, select the option Delete on the RAID volume info page and press . *Please note that the UEFI screenshots shown in this installation guide are for reference only. The actual screen may differ by model on the RAID volume info page and press . 17 - ASRock X299M Extreme4 | RAID Installation Guide - Page 18
2.4.3 Configuring a RAID array Using Intel RAID BIOS Reboot your computer. Wait until you see the RAID software prompting you to press . Press . Then, the Intel RAID Utility - Create RAID Volume - ASRock X299M Extreme4 | RAID Installation Guide - Page 19
Use the up or down arrow keys to select your desired RAID Level. You may select RAID 0 (Stripe), RAID 1 (Mirror), RAID 5 or RAID 10 for your RAID level. Press , and then you can select Strip Size. Volume0 Volume0 If you selected RAID 0 (Stripe), use the up or down keys to select the stripe - ASRock X299M Extreme4 | RAID Installation Guide - Page 20
Volume0 After setting up Capacity, please press . Volume0 Press under the Create Volume item. The utility prompts a confirmation message as below. Volume0 20 - ASRock X299M Extreme4 | RAID Installation Guide - Page 21
set up. Please note that you are only allowed to create one RAID partition at a time under BIOS RAID environment. If you want to create an extra RAID partition, please use the RAID utility under select the option Delete RAID Volume, press , and then follow the instructions on the screen. 21 - ASRock X299M Extreme4 | RAID Installation Guide - Page 22
3. Installing Windows® on a HDD under 2TB in RAID mode After the UEFI and RAID BIOS setup you may start installing Windows® 10 64-bit OS as usual. 22 - ASRock X299M Extreme4 | RAID Installation Guide - Page 23
-bit. After the UEFI and RAID BIOS setup, please follow the steps below. STEP 1: Copy Intel® RAID drivers into a USB flash disk You can download the drivers from ASRock's website and unzip the files into a USB flash disk or copy the files from ASRock's motherboard support CD. (Please copy the files - ASRock X299M Extreme4 | RAID Installation Guide - Page 24
copied in the first step. Please keep the USB flash disk installed until the system's first reboot. Continue to install the OS by following the instructions. 24 - ASRock X299M Extreme4 | RAID Installation Guide - Page 25
into Windows® or install driver/utilities. If you encounter this problem, you will need to follow the instructions below to fix this problem. Windows® 10 64-bit: A. Please request the hotfix KB2505454 through this link: http://support.microsoft.com/kb/2505454/ B. After installing Windows® 10 64-bit
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
 |
 |
1
Guide to SATA Hard Disks
Installation and RAID Configuration
1.
Guide to SATA Hard Disks Installation
..............................
2
1.1
Serial ATA (SATA) Hard Disks Installation
................
2
2.
Guide to RAID Configurations
...........................................
3
2.1
Introduction of RAID
.................................................
3
2.2
RAID Configuration Precautions
..............................
6
2.3
Installing Windows
®
10 64-bit With RAID Functions
.7
2.4
Configuring a RAID array
.........................................
8
2.4.1
Configuring a RAID array Using UEFI Setup Utility
......
9
2.4.2
Configuring a PCIE SSD RAID Array Using UEFI
Setup Utility
.................................................................
13
2.4.3
Configuring a RAID array Using Intel RAID BIOS
......
18
3.
Installing Windows
®
on a HDD under 2TB in RAID
mode
..................................................................
22
4.
Installing Windows
®
on a HDD larger than 2TB in
RAID mode
..................................................................
23