ASRock X58 Deluxe3 User Manual

ASRock X58 Deluxe3 Manual

Get ASRock X58 Deluxe3 PDF manuals and user guides View all ASRock X58 Deluxe3 manuals
Add to My Manuals
Save this manual to your list of manuals

ASRock X58 Deluxe3 manual content summary:

  • ASRock X58 Deluxe3 | User Manual - Page 1
    X58 Deluxe3 User Manual Version 1.0 Published December 2009 Copyright©2009 ASRock INC. All rights reserved. 1
  • ASRock X58 Deluxe3 | User Manual - Page 2
    any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for
  • ASRock X58 Deluxe3 | User Manual - Page 3
    Guide ..... 23 2.8 CrossFireXTM and Quad CrossFireXTM Operation Guide 28 2.9 ASRock SATA3 Card Quick Guide 33 2.10 ASRock USB 3.0 Card Quick Guide Operation Guide 46 2.19 Driver Installation Guide 48 2.20 Installing Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit With RAID
  • ASRock X58 Deluxe3 | User Manual - Page 4
    VistaTM 64-bit Without RAID Functions 53 2.22 Untied Overclocking Technology 53 3 BIOS SETUP UTILITY 54 3.1 Introduction 54 3.1.1 BIOS Menu Bar 54 3.1.2 4 Software Support 75 4.1 Install Operating System 75 4.2 Support CD Information 75 4.2.1 Running Support CD 75 4.2.2 Drivers Menu 75
  • ASRock X58 Deluxe3 | User Manual - Page 5
    information about the model you are using. www.asrock.com/support/index.asp 1.1 Package Contents ASRock X58 Deluxe3 Motherboard (ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm) ASRock X58 Deluxe3 Quick Installation Guide ASRock X58 Deluxe3 Support CD 1 x 80-conductor Ultra ATA 66/100/133
  • ASRock X58 Deluxe3 | User Manual - Page 6
    design (100% Japan-made high-quality Conductive Polymer Capacitors) - Intel® Socket 1366 CoreTM i7 Processor Extreme Edition / CoreTM i7 Processor Supports Intel® Dynamic Speed Technology - System Bus up to 6400 MT/s; Intel® QuickPath Interconnect - Supports Hyper-Threading Technology (see CAUTION
  • ASRock X58 Deluxe3 | User Manual - Page 7
    support RAID (RAID 0, RAID 1, RAID 10, RAID 5 and Intel Matrix Supports jumperfree - SMBIOS 2.3.1 Support - CPU, DRAM, NB, SB, VTT Voltage Multi-adjustment - Supports I. O. T. (Intelligent Overclocking Technology) - Supports Smart BIOS - Drivers, Utilities, AntiVirus Software (Trial Version), ASRock
  • ASRock X58 Deluxe3 | User Manual - Page 8
    setting in the BIOS, applying Untied Overclocking supports Triple Channel Memory Technology. Be- fore you implement Triple Channel Memory Technology, make sure to read the installation guide XP SP1 or SP2. 8. It is a user-friendly ASRock overclocking tool which allows you to surveil your system by
  • ASRock X58 Deluxe3 | User Manual - Page 9
    MS-DOS or Windows®. With this utility, you can press key during the POST or press key to BIOS setup menu to access ASRock Instant Flash. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your
  • ASRock X58 Deluxe3 | User Manual - Page 10
    website: http://www.asrock.com/support/index.htm 1.4 Three SLITM Graphics Card Support List (for Windows® VistaTM / VistaTM 64-bit) Chipset Vendor NVIDIA Model Name LEADTEK PX9800 GTX+ GIGABYTE GV-N26-896H-B Chipset Name Driver GeForce 9800GTX+ 180.48 GeForce GTX260 180.48 * For the latest
  • ASRock X58 Deluxe3 | User Manual - Page 11
    GC-HD485PG3-E3 Chipset Name RADEON 4850 Driver Catalyst 8.12 + Hotfix * For the latest updates of the supported PCI Express VGA card list for CrossFireXTM Mode, please visit our website for details. ASRock website: http://www.asrock.com/support/index.htm 1.7 Four CrossFireXTM Graphics Card
  • ASRock X58 Deluxe3 | User Manual - Page 12
    Chipset PWR_FAN1 PCIE1 CHA_FAN2 NB_FAN1 CHA_FAN1 RoHS PCI1 3-WaySLI PCIE2 PCI2 X58 Deluxe3 PCI Express 2.0 1394a 8Mb BIOS VIA VT6330 IDE1 PCIE3 PCI3 CMOS Battery Intel ICH10R PCIE4 RAID 1 COM1 1 IR1 CLRCMOS1 1 USB10 1 SPEAKER1 1 28 27 26 25 24 23 22 21 20 19 18 FRONT_1394
  • ASRock X58 Deluxe3 | User Manual - Page 13
    1 . 9 I/O Panel 12 34 58 69 7 10 16 15 14 13 12 11 1 PS/2 Mouse Port (Green) 2 Coaxial SPDIF Out Port 3 IEEE 1394 Port * 4 LAN RJ-45 Port 5 Side Speaker (Gray) 6 Rear Speaker (Black) 7 Central / Bass (Orange) 8 Line In (Light Blue) ** 9 Front Speaker (Lime) 10 Microphone (Pink) 11 USB 2.0
  • ASRock X58 Deluxe3 | User Manual - Page 14
    of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on
  • ASRock X58 Deluxe3 | User Manual - Page 15
    For the installation of Intel 1366-Pin CPU, please follow the steps below. Load Plate Contact Array Socket Body Load Lever 1366-Pin Socket Overview Before you insert the 1366-Pin CPU into the socket, please check if the 2. This cap must be placed if returning the motherboard for after service. 15
  • ASRock X58 Deluxe3 | User Manual - Page 16
    Heat Sink) up. Locate Pin1 and the two orientation key notches. orientation key notch Pin1 Pin1 alignment key orientation key notch 1366-Pin CPU alignment key 1366-Pin Socket For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of
  • ASRock X58 Deluxe3 | User Manual - Page 17
    2.4 Installation of CPU Fan and Heatsink This motherboard is equipped with 1366-Pin socket that supports Intel 1366-Pin CPU. Please adopt the type of heatsink and cooling fan compliant with Intel 1366-Pin CPU to dissipate heat. Before you installed the heatsink, you need to spray thermal interface
  • ASRock X58 Deluxe3 | User Manual - Page 18
    , the system will not boot if only one DIMM is installed into DDR3_A2, DDR3_B2 or DDR3_C2 slot. 3. Due to Intel® CPU spec definition, XMP DIMMs and DDR3 2000/ 1866/1600 are supported for one DIMM per channel only. 4. You may install varying memory sizes in Channel A, Channel B and Channel C. The
  • ASRock X58 Deluxe3 | User Manual - Page 19
    Installing a DIMM Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1. Step 2. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. notch break
  • ASRock X58 Deluxe3 | User Manual - Page 20
    2.6 Expansion Slots (PCI and PCI Express Slots) There are 3 PCI slots and 4 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 / PCIE3 (PCIE x16 slot; Blue) is used for PCI Express x16 lane width
  • ASRock X58 Deluxe3 | User Manual - Page 21
    1. In single VGA card mode, it is recommended to install a PCI Express x16 graphics card on PCIE1 slot. 2. In CrossFireXTM mode or 2-Way SLITM mode, please install PCI Express x16 graphics cards on PCIE1 and PCIE3 slots. Therefore, both these two slots will work at x16 bandwidth. 3. In 3-Way SLITM
  • ASRock X58 Deluxe3 | User Manual - Page 22
    Guide This motherboard supports NVIDIA® SLITM, 3-Way SLITM and Quad SLITM (Scalable Link Interface) technology that allows you to install up to three identical PCI Express x16 graphics cards. Currently, NVIDIA® SLITM technology supports driver supports NVIDIA® SLITM technology. Download the driver
  • ASRock X58 Deluxe3 | User Manual - Page 23
    Step3. Align and insertASRock SLI_Bridge_3S Card to the goldfingers on each graphics card. Make sure ASRock SLI_Bridge_3S Card is firmly in place. ASRock SLI_Bridge_3S Card Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI connector of the graphics card that is inserted
  • ASRock X58 Deluxe3 | User Manual - Page 24
    card are connected. Repeat this step on the three graphics cards. Step3. Align and insert ASRock 3-Way SLI Bridge Card to the goldfingers on each graphics card. Make sure ASRock 3-Way SLI Bridge Card is firmly in place. ASRock 3-Way SLI Bridge Card Step4. Connect a VGA cable or a DVI cable to the
  • ASRock X58 Deluxe3 | User Manual - Page 25
    Installation and Setup Install the graphics card drivers to your system. After that, you can enable the MultiGraphics Processing Unit (GPU) feature in the NVIDIA® nView system tray utility. Please follow the below
  • ASRock X58 Deluxe3 | User Manual - Page 26
    For Windows® VistaTM / VistaTM 64-bit OS: (For SLITM and Quad SLITM mode) A. Click the Start icon on your Windows taskbar. B. From the pop-up menu, select All Programs, and then click NVIDIA Corporation. C. Select NVIDIA Control Panel tab. D. Select Control Panel tab. E. From the pop-up menu, select
  • ASRock X58 Deluxe3 | User Manual - Page 27
    For Windows® VistaTM / VistaTM 64-bit OS: (For 3-Way SLITM mode) A. Follow step A to D on page 26. B. From the pop-up menu, select Set SLI and PhysX configuration. In Select a hardware acceleration setting for PhysX item, please select Enabled. In Select an SLI configuration item, please select
  • ASRock X58 Deluxe3 | User Manual - Page 28
    supported with Windows® XP with Service Pack 2 and VistaTM OS. Quad CrossFireXTM feature is supported with Windows® VistaTM OS only. Please check AMD website for ATITM CrossFireXTM driver please refer to ATITM graphics card manuals for detailed installation guide. Step 1. Insert one Radeon graphics
  • ASRock X58 Deluxe3 | User Manual - Page 29
    top of Radeon graphics cards. (If there are two gold fingers on each Radeon graphics card, please use two ASRock XFire_Bridge_3S Cards to connect two Radeon graphics cards.) ASRock XFire_Bridge_3S Card Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graphics card on PCIE1
  • ASRock X58 Deluxe3 | User Manual - Page 30
    2.8.1.2 Installing Four CrossFireXTM-Ready Graphics Cards Step 1. Insert Radeon graphics cards into PCIE1, PCIE2, PCIE3 and PCIE4 slots. Make sure that the cards are properly seated on the slots. Step 2. Use one CrossFireXTM Bridge to connect Radeon graphics cards on PCIE1 and PCIE2 slots, use
  • ASRock X58 Deluxe3 | User Manual - Page 31
    utility to uninstall any previously installed Catalyst drivers prior to installation. Please check AMD website for ATITM driver updates. Step 3. Step 4. Step 5. Install the required drivers to your system. For Windows® XP OS: A. ATITM recommends Windows® XP Service Pack 2 or higher to be installed
  • ASRock X58 Deluxe3 | User Manual - Page 32
    Although you have selected the option "Enable CrossFireTM", the CrossFireXTM function may not work actually. Your computer will automatically reboot. After restarting your computer, please confirm whether the option "Enable CrossFireTM" in "ATI Catalyst Control Center" is selected or not; if not,
  • ASRock X58 Deluxe3 | User Manual - Page 33
    SATA3 Card Quick Guide I. Introduction This motherboard is free bundled with ASRock SATA3 Card. ASRock SATA3 Card is composed of three SATAIII connectors which allow up to 6.0 Gb/s data transfer rate. The red eSATAIII connector (eSATAIII_1) supports external storage devices, and the yellow SATAIII
  • ASRock X58 Deluxe3 | User Manual - Page 34
    . You can only use either one of them. or Step 3. Connect the chassis HDD LED lead to ASRock SATA3 Card LED header (HDLED-_CHA and HDLED+_CHA). Before connecting, please consult the chassis manual for the electrode of the HDD LED lead. Make sure you connect the HDD LED lead to the
  • ASRock X58 Deluxe3 | User Manual - Page 35
    of ASRock support CD: ..\Drivers\USB3.0\NEC\Win7-64_Win7_Vista64_Vista_XP64_XP (v10170)\NECEL-USB3-Host-Driver-10170-setup.exe Step 3. Restart your system. Then you can freely enjoy the convenience of ASRock USB 3.0 Card. * Whether USB legacy can work depends on the system motherboard BIOS support
  • ASRock X58 Deluxe3 | User Manual - Page 36
    Display feature. For the detailed instruction, please refer to the document at the following path in the Support CD: ..\ Surround Display Information the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first
  • ASRock X58 Deluxe3 | User Manual - Page 37
    80-conductor ATA 66/100/133 cable Note: Please refer to the instruction of your IDE device vendor for the details. Serial ATAII Connectors . 17) SATAII_3_4 SATAII_1_2 These six Serial ATAII (SATAII) connectors support SATA data cables for internal storage devices. The current SATAII interface
  • ASRock X58 Deluxe3 | User Manual - Page 38
    , there are three USB 2.0 headers on this motherboard. USB8_9 and USB6_7 headers can support four USB 2.0 ports (two ports for each header). USB10 header can support one USB 2.0 port. This header supports an optional wireless transmitting and receiving infrared module. This connector allows you to
  • ASRock X58 Deluxe3 | User Manual - Page 39
    wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. 't need to connect them for AC'97 audio panel. E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select Chipset Configuration. Set
  • ASRock X58 Deluxe3 | User Manual - Page 40
    connect a CPU fan cable to this connector and match the black wire to the ground pin. Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to
  • ASRock X58 Deluxe3 | User Manual - Page 41
    port on the I/O panel, there is one IEEE 1394 header (FRONT_1394) on this motherboard. This IEEE 1394 header can support one IEEE 1394 port. This COM1 header supports a serial port module. HDMI_SPDIF header, providing SPDIF audio output to HDMI VGA card, allows the system to connect HDMI Digital
  • ASRock X58 Deluxe3 | User Manual - Page 42
    Guide of HDMI VGA card, please refer to the installation guide on page 20. Step 2. Connect the black end (A) VGA card, please refer to the user manual of HDMI VGA card vendor. Incorrect connection may card. Please refer to the VGA card user manual for connector usage in advance. Connect the HDMI
  • ASRock X58 Deluxe3 | User Manual - Page 43
    guide. Some default setting of SATAII hard disks may not be at SATAII mode, which operate with the best performance. In order to enable SATAII function, please follow the below instruction 's website for details: http://www.hitachigst.com/hdd/support/download.htm The above examples are just for your
  • ASRock X58 Deluxe3 | User Manual - Page 44
    south bridge chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 10, RAID 5, and Intel Matrix Storage) functions. You may install SATA / SATAII hard disks on this motherboard for internal storage devices. This section will guide you to install
  • ASRock X58 Deluxe3 | User Manual - Page 45
    Hot Plug and Hot Swap functions for SATA / SATAII / eSATAII Devices in RAID / AHCI mode. Intel® ICH10R south bridge chipset provides hardware support for Advanced Host controller Interface (AHCI), a new programming interface for SATA host controllers developed thru a joint industry effort. NOTE
  • ASRock X58 Deluxe3 | User Manual - Page 46
    is installed into system properly. The latest SATA / SATAII driver is available on our support website: www.asrock.com 4. Make sure to use the SATA power cable & data cable, which are from our motherboard package. 5. Please follow below instructions step by step to reduce the risk of HDD crash or
  • ASRock X58 Deluxe3 | User Manual - Page 47
    the SATA / SATAII HDD. How to Hot Unplug a SATA / SATAII HDD: Points of attention, before you process the Hot Unplug: Please do follow below instruction sequence to process the Hot Unplug, improper procedure will cause the SATA / SATAII HDD damage and data loss. Step 1 Unplug SATA data cable from
  • ASRock X58 Deluxe3 | User Manual - Page 48
    with RAID functions, please follow below steps. STEP 1: Set up BIOS. A. Enter BIOS SETUP UTILITY drivers into the floppy diskette. STEP 3: Use "RAID Installation Guide" to set RAID configuration. Before you start to configure the RAID function, you need to check the installation guide in the Support
  • ASRock X58 Deluxe3 | User Manual - Page 49
    . Please refer to the document in the Support CD, "Guide to SATA Hard Disks Installation and RAID Configuration", which is located in the folder at the following path: .. \ RAID Installation Guide and the document in the support CD, "Guide to Intel Matrix Storage Manager", which is located in
  • ASRock X58 Deluxe3 | User Manual - Page 50
    CD-ROM included with your motherboard or after downloading it from the Internet. This will add the Intel(R) Matrix Storage Console which can be used to manage the RAID configuration. 7. After setting up a "RAID Ready" system as the above steps, you can follow the procedures of the next section to
  • ASRock X58 Deluxe3 | User Manual - Page 51
    the instruction to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS on your system. When you see "Where do you want to install Windows?" page, please insert the ASRock Support CD into your optical drive, and click the "Load Driver" button on the left on the bottom to load the Intel® RAID
  • ASRock X58 Deluxe3 | User Manual - Page 52
    beginning of Windows® setup, press F6 to install a thirdparty AHCI driver. When prompted, insert the SATA / SATAII driver diskette containing the Intel® AHCI driver. After reading the floppy disk, the driver will be presented. Select the driver to install according to the mode you choose and the OS
  • ASRock X58 Deluxe3 | User Manual - Page 53
    the instruction to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS on your system. When you see "Where do you want to install Windows?" page, please insert the ASRock Support CD into your optical drive, and click the "Load Driver" button on the left on the bottom to load the Intel® AHCI
  • ASRock X58 Deluxe3 | User Manual - Page 54
    UTILITY when you start up the computer. Please press during the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise, POST will continue with its test routines. If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by pressing + + , or by
  • ASRock X58 Deluxe3 | User Manual - Page 55
    H/W Monitor Boot Security Exit System Overview System Time System Date [14:00:09] [Mon 12/14/2009] BIOS Version : X58 Deluxe3 P1.00 Processor Type : Intel (R) Xeon (TM) CPU W 570 @ 3.20GHz (64bit) Processor Speed : 3200MHz Microcode Update : 106A4/A Cache Size : 8192KB Total Memory
  • ASRock X58 Deluxe3 | User Manual - Page 56
    Main Smart Advanced H/W Monitor Boot Security Exit Smart Settings Save Changes and Exit Load BIOS Defaults Load Performance Setup Default (IDE/SATA) Load Performance Setup AHCI Mode Load Performance Setup RAID Mode Load Power Saving Setup Default Load OC '4.0GMHz CPU Frequency' Setup Setting Load
  • ASRock X58 Deluxe3 | User Manual - Page 57
    Configuration, Chipset Configuration, ACPI Configuration, Storage Configuration, PCIPnP Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration. BIOS SETUP UTILITY Main Smart Advanced H/W Monitor Boot Security Exit Advanced Settings WARNING : Setting wrong values in below
  • ASRock X58 Deluxe3 | User Manual - Page 58
    Halt State (C1). The C1 state is supported through the native processor instructions HLT and MWAIT and requires no hardware support from the chipset. In the C1 power state, the processor maintains the context of the system caches. Intel (R) Virtualization tech. When this option is set to [Enabled
  • ASRock X58 Deluxe3 | User Manual - Page 59
    VistaTM and want to enable this function, please set this item to [Enabled]. This item will be hidden if the current CPU does not support Intel (R) SpeedStep(tm) tech.. Please note that enabling this function may reduce CPU voltage and lead to system stability or compatibility issue with some power
  • ASRock X58 Deluxe3 | User Manual - Page 60
    TDP Limit value Program the TDP (power) limit for Turbo Mode so that the processor does not throttle at peak performance conditions. Intel (R) C-STATE tech. Intel (R) C-STATE tech. is achieved by making the power and thermal control unit part of the core logic and not part of the chipset as
  • ASRock X58 Deluxe3 | User Manual - Page 61
    3.4.2Chipset Configuration BIOS SETUP UTILITY Advanced Chipset Settings Overclock Mode BCLK Frequency (MHz) PCIE Overclock Mode. Configuration options: [Auto], [Manual], [I.O.T.] and [Optimized]. The default value is [Auto]. If you select [Manual], Untied Overclocking function is enabled. Please
  • ASRock X58 Deluxe3 | User Manual - Page 62
    ]. It will allow better tolerance for memory compatibility when it is set to [Enabled]. DRAM Timing Control Use this item to control DRAM Timing. BIOS SETUP UTILITY Advanced DRAM Timing Control Current Setting : 8-8-8-20-48-8-4-6-5-21 DRAM tCL DRAM tRCD DRAM tRP DRAM tRAS DRAM tRFC DRAM tWR DRAM
  • ASRock X58 Deluxe3 | User Manual - Page 63
    is [Auto]. Voltage Control Use this item to control voltage. BIOS SETUP UTILITY Advanced Voltage Control CPU Voltage DRAM Voltage DRAM CTRL Voltage Use this to select CPU Voltage. Configuration options: [Auto] and [Manual]. The default value is [Auto]. DRAM Voltage Use this to select DRAM Voltage
  • ASRock X58 Deluxe3 | User Manual - Page 64
    value is [Disabled]. Configuration options: [Enabled] and [Disabled]. If you want to enable this function, please set this item to [Enabled]. Besides the BIOS option, you can also choose our Intelligent Energy Saver utility to enable this function. CIR10 Field 1 Use this to enable or disable CIR10
  • ASRock X58 Deluxe3 | User Manual - Page 65
    This determines the maximum TLP (Transaction Layer Packet) payload size that can be supported by PCI Express controller. Configuration options: [128B] and [256B]. The default value is [128B]. 3.4.3ACPI Configuration BIOS SETUP UTILITY Advanced ACPI Configuration Suspend To RAM Repost Video on STR
  • ASRock X58 Deluxe3 | User Manual - Page 66
    Storage Configuration BIOS SETUP UTILITY RAID] or [AHCI] mode, the option "Hot Plug" will appear. You are allowed to use the Hot Plug function under Windows environment if this option is enabled. Configuration options: [Enabled] and [Disabled]. AHCI (Advanced Host Controller Interface) supports
  • ASRock X58 Deluxe3 | User Manual - Page 67
    only when you install ASRock SATA3 Card. Use Primary IDE Master" as the example in the following instruction. BIOS SETUP UTILITY Advanced Primary IDE Master Device Vendor Size :Hard Disk :ST340014A :40.0 GB :Supported :16Sectors :4 :MultiWord DMA-2 :Ultra DMA-5 :Supported [Auto] [Auto] [Auto] [Auto
  • ASRock X58 Deluxe3 | User Manual - Page 68
    Enabled]. 32-Bit Data Transfer Use this item to enable 32-bit access to maximize the IDE hard disk data transfer rate. 3.4.5PCIPnP Configuration BIOS SETUP UTILITY Advanced Advanced PCI / PnP Settings PCI Latency Timer PCI IDE BusMaster [64] [Enabled] Value in units of PCI clocks for PCI device
  • ASRock X58 Deluxe3 | User Manual - Page 69
    SETUP UTILITY Advanced Configure Super IO Chipset OnBoard Floppy Controller Serial Port Address Infrared Port Address [Enabled] [3F8 / IRQ4] [Disabled] Allow BIOS to Enable or Disable Floppy Controller. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and
  • ASRock X58 Deluxe3 | User Manual - Page 70
    this item to enable or disable the USB 2.0 support. Legacy USB Support Use this option to select legacy support for USB devices. There are four configuration options: [Enabled], [Auto], [Disabled] and [BIOS Setup Only]. The default value is [BIOS Setup Only]. Please refer to below descriptions for
  • ASRock X58 Deluxe3 | User Manual - Page 71
    your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. BIOS SETUP UTILITY Main Smart Advanced H/W Monitor Boot Security Exit Hardware Health Event Monitoring CPU Temperature M / B Temperature CPU Fan Speed
  • ASRock X58 Deluxe3 | User Manual - Page 72
    this section, it will display the available devices on your system for you to configure the boot settings and the boot priority. BIOS SETUP UTILITY Main Smart Advanced H/W Monitor Boot Security Exit Boot Settings Boot Settings Configuration Configure Settings during System Boot. 1st Boot Device
  • ASRock X58 Deluxe3 | User Manual - Page 73
    "Full Screen Logo". Configuration options: [Auto], [PCIE2.0 Revolution], [Scenery] and [ASRock]. The default value is [Auto]. Currently, the option [Auto] is set to system. For the user password, you may also clear it. BIOS SETUP UTILITY Main Smart Advanced H/W Monitor Boot Security Exit Security
  • ASRock X58 Deluxe3 | User Manual - Page 74
    and exit setup?" Select [OK] to save the changes and exit the BIOS SETUP UTILITY. Discard Changes and Exit When you select this option, it message, "Discard changes and exit setup?" Select [OK] to exit the BIOS SETUP UTILITY without saving any changes. Discard Changes When you select this option
  • ASRock X58 Deluxe3 | User Manual - Page 75
    install the necessary drivers to activate the devices. 4.2.3 Utilities Menu The Utilities Menu shows the applications software that the motherboard supports. Click on a specific item then follow the installation wizard to install it. 4.2.4 Contact Information If you need to contact ASRock or want to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
1
X58 Deluxe3
User Manual
Version 1.0
Published December 2009
Copyright©2009 ASRock INC. All rights reserved.