ASRock Z690M PG Riptide/D5 RAID Installation Guide
ASRock Z690M PG Riptide/D5 Manual
 |
View all ASRock Z690M PG Riptide/D5 manuals
Add to My Manuals
Save this manual to your list of manuals |
ASRock Z690M PG Riptide/D5 manual content summary:
- ASRock Z690M PG Riptide/D5 | RAID Installation Guide - Page 1
array Using UEFI Setup Utility The BIOS screenshots in this guide are for reference only and may differ from the exact the product specification page of the model you are using for information on RAID support. Because the motherboard specifications and the BIOS software might be updated, the content - ASRock Z690M PG Riptide/D5 | RAID Installation Guide - Page 2
Then set Enable VMD Global Mapping to [Enabled]. Next, press to save the configuration changes and exit setup. STEP 3. Enter Intel(R) Rapid Storage Technology in the Advanced page. 2 - ASRock Z690M PG Riptide/D5 | RAID Installation Guide - Page 3
STEP 4: Select the option Create RAID Volume and press . STEP 5: Key-in a volume name and press , or simply press to accept the default name. 3 - ASRock Z690M PG Riptide/D5 | RAID Installation Guide - Page 4
STEP 6: Select your desired RAID Level and press . STEP 7: Select the hard drives to be included in the RAID array and press . 4 - ASRock Z690M PG Riptide/D5 | RAID Installation Guide - Page 5
STEP 8: Select a stripe size for the RAID array or use the default setting and press . STEP 9: Select Create Volume and press to start creating the RAID array. 5 - ASRock Z690M PG Riptide/D5 | RAID Installation Guide - Page 6
a RAID volume, select the option Delete on the RAID volume info page and press . *Please note that the UEFI screenshots shown in this installation guide are for reference only. Please refer to ASRock's website for details about each model motherboard. https://www.asrock.com/index.asp 6 - ASRock Z690M PG Riptide/D5 | RAID Installation Guide - Page 7
drivers from ASRock's website (https://www.asrock.com/index.asp) and unzip the files to a USB flash drive or copy the files from ASRock's motherboard support CD. STEP 2 Press at system POST to launch the boot menu and choose the item "UEFI: " to install Windows® 10 - ASRock Z690M PG Riptide/D5 | RAID Installation Guide - Page 8
STEP 3 (If the drive that you plan to install Windows is available, please go to STEP 6) If during the Windows installation process the target drive is not available, please click . STEP 4 Click to find the driver on your USB flash drive. 8 - ASRock Z690M PG Riptide/D5 | RAID Installation Guide - Page 9
STEP 5 Select "Intel(R) Chipset SATA/PCIe Premium Controller" and then click . STEP 6 Select unallocated space and then click . 9 - ASRock Z690M PG Riptide/D5 | RAID Installation Guide - Page 10
STEP 7 Please follow Windows' installation instructions to finish the process. STEP 8 After the Windows installation is finished, please install the Rapid Storage Technology driver and utility from ASRock's website. https://www.asrock.com/index.asp 10
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
1
Configuring a RAID array Using UEFI Setup Utility
The BIOS screenshots in this guide are for reference only and may differ from the exact settings
for your motherboard. The actual setup options you will see shall depend on the motherboard
you purchase. Please refer to the product specification page of the model you are using for
information on RAID support. Because the motherboard specifications and the BIOS software
might be updated, the content of this documentation will be subject to change without notice.
STEP 1:
Enter the UEFI Setup Utility by pressing <F2> or <Del> right after you power on the computer.
STEP 2:
Go to Advanced\Storage Configuration\VMD Configuration and set Enable VMD controller to
[Enabled].