Acer AC713 AC 713 User Guide
Acer AC713 Manual
 |
View all Acer AC713 manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer AC713 manual content summary:
- Acer AC713 | AC 713 User Guide - Page 1
Before operating the monitor please read this manual thoroughly. This manual should be retained for future reference. Contents Packing list 1 Precautions 2 Installation Instructions 3 Swivel Base 3 Power cord 3 Video cable 4 Operating Instructions 5 General Instructions 5 Front panel control - Acer AC713 | AC 713 User Guide - Page 2
with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions. z monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor. z Do not attempt to service the monitor - Acer AC713 | AC 713 User Guide - Page 3
INSTALLATION INSTRUCTIONS Swivel Base To attach the swivel base to the monitor, do the following: • Carefully turn the monitor on its side or upside down. ( see figure 1 ) • Locate the cavities at the bottom front of the monitor. • Insert the pegs on the swivel base into these cavities. Push the - Acer AC713 | AC 713 User Guide - Page 4
connector. Caution: Don't bend the signal cable, otherwise it will break the inner wire. Connecting the Power Cord: Plug the power cord into the monitor's AC power socket. Then plug the power cord into a grounded AC outlet or ULapproved power strip or the power output socket on your PC. Caution - Acer AC713 | AC 713 User Guide - Page 5
OPERATING INSTRUCTIONS General Instructions The other control knobs are located at the base of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the video cable from the monitor to the - Acer AC713 | AC 713 User Guide - Page 6
function adjust. • EXIT : Exit a function or inactive OSD menu. • POWER INDICATOR : Green - Power On mode. Orange - Off mode. How to adjust a setting The monitor controls are accessed by pressing button MENU to enable OSD (On-Screen-Display). The main menu will be displayed as follows. Figure 4 The - Acer AC713 | AC 713 User Guide - Page 7
Adjusting the picture The description for functional control icons 1. CONTRAST : Adjust the picture contrast. 2. BRIGHTNESS : Adjust the picture brightness. 3. H-CENTER : Adjust the horizontal position of the picture. 4. H-SIZE : Adjust the picture's horizontal size. 5. V-CENTER : - Acer AC713 | AC 713 User Guide - Page 8
. Please adjust the level to the optimum condition. Note: Too high of a setting will cause the picture to shake. 17. RECALL : Press RECALL to restore the monitor to factory settings. 18. EXIT : Close OSD window. 19. SELECT LANGUAGE : Select the language as you like. 41A749-786-1A 英文 8 - Acer AC713 | AC 713 User Guide - Page 9
, following a time-out period, will automatically switch to an OFF mode. This reduces the monitor's internal power supply consumption. After the video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to a "Screen Saver" feature - Acer AC713 | AC 713 User Guide - Page 10
TECHNICAL SUPPORT (FAQ) Problem & Question Power LED is not on No Plug & Play Play compatible *Check if the D-15 plug pin of Video Cable is bent *Make sure the Monitor Drivers are installed *Adjust the Contrast and Brightness Controls. *Move electrical devices that may cause electrical interference - Acer AC713 | AC 713 User Guide - Page 11
SPECIFICATIONS CRT Viewable Image Size 43.2cm(17"), 90 /Negative Synchronization • Horizontal • Vertical Max. Resolution Video Dot Rate Factory Preset Timings : User 10% to 85% relative, non-condensing Weight Dimensions 16kg(Net) • Monitor 410(W) × 411(H) × 420(D)mm Signal Cable 15 pin mini - Acer AC713 | AC 713 User Guide - Page 12
Functions ( OSD ) Plug & Play EPA ENERGY On mode STAR® Off mode Power consumption Preset display area • CONTRAST • BRIGHTNESS • H-CENTER • H-SIZE • V-CENTER • V-SIZE • ZOOM • PINCUSHION • TRAPEZOID • PIN-BALANCE • PARALLELOGRAM • ROTATION • 6500°K • USER COLOR • 9300°K • DEGAUSS • MOIRE - Acer AC713 | AC 713 User Guide - Page 13
APPENDIX B - FACTORY PRESET TIMING TABLE STANDARD IBM VGA VESA/85 VESA/85 VESA/85 VESA/60 RESOLUTION 720 × 400 640 × 480 640 × 480 800 × 600 1024 × 768 1280 × 1024 HORIZONTAL FREQUENCY 31.5kHz 31.5kHz 43.3kHz 53.7kHz 68.7kHz 64.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
41A749-786-1A 英文
1
Before operating the monitor please read this manual thoroughly. This
manual should be retained for future reference.
Contents
Packing list
------------------------------------------------------
1
Precautions
------------------------------------------------------
2
Installation Instructions
--------------------------------------
3
Swivel
Base
----------------------------------------------------
3
Power cord
---------------------------------------------------
3
Video cable
---------------------------------------------------
4
Operating Instructions
---------------------------------------
5
General Instructions
---------------------------------------
5
Front panel control
-----------------------------------------
6
How to adjust a setting
------------------------------------
6
Adjusting the picture
---------------------------------------
7-8
Plug and play
---------------------------------------------------
9
Technical Support (FAQ)
------------------------------------
10
Appendix A – Specifications
--------------------------------- 11-12
Appendix B – Factory Preset Timing Table
--------------
13
PACKING LIST
The product package should include the following items:
1.
Monitor
2.
Owner's Manual
3.
Power Cord
4.
Swivel Base