Acer AL1716 AL1716W Service Guide - Page 44

7. Assembly and Disassembly Procedures (continued) Steps Photo Procedures Part Number Spare Parts List Part Name Q'ty ACER AL1716W 43 Go to cover page Remark 1 S11 2 Use a Phillips-head screwdriver screwed the No.1~2 screws. 7140330083P0A SCREW_DOUBLE THREAD_NONE_FLAT HEAD_M3_8 2 Screw Size=M3x8; Torque=5~6KGF.CM S12 3 4 D-Sub Cable Use a Hex-head screwdriver screwed the D-Sub connectors No.3~4 Hex Nut to fix it. 7110730082P0A SCREW_MACHINE_NONE_HEX WASHER HEAD_M3_8m m_Fe NI 2 Screw Size=M3x8; Torque=4.5~6.5KGFKGF.CM S13 Use a Phillips-head screwdriver fixed Heat-sink on the Bracket Chassis module. 7110330052P0A SCREW-MACHING-FLAT HEAD-M3-5-NI 1 Screw Size=M3x5; Torque=5~7KGFKGF.CM S14 S15 1 S16 S17 3 2 S18 1 Put a Rear Bezel (inner side faced up) on the table and move the assembled panel module on its top. 7737616800P0A RC ASSY_#6800_ABS 94V0_ACER_T17ANHW 1 - Key Function cable 2 3 Put a Front Bezel on the table Connect the Function Key cable to connector located on the Function Key board. Use a Phillips-head screwdriver screwed number 1~2 screws and fixed the Function Key board on the Front Bezel. 7737517400P0A FC ASSY_#6790/#6810_ABS94V0_ACER_T17BNHW 5113800899P T17BNHW-G1(99)_ACER_FUNCTION KEY BD 7140130061P0A SCREW_MACHINE_WITHOUT_NINDING_M3_6L_BLA 1 - 1 - 2 Screw Size=M3x6; Torque=6~8KGF.CM 2 Turn over the panel module (screen faced up), and then press down on the number 1~3 positions of both sides till - - two assembled parts firmly attached. 1 - -