Acer AL1721 AL1721 User's Guide
Acer AL1721 Manual
 |
View all Acer AL1721 manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer AL1721 manual content summary:
- Acer AL1721 | AL1721 User's Guide - Page 1
5 ADJUSTING THE VIEWING ANGLE 6 OPERATING INSTRUCTIONS 7 GENERAL INSTRUCTIONS 7 HOW TO ADJUST A SETTING 9 ADJUSTING THE PICTURE 10-11 PLUG AND PLAY 12 TECHNICAL SUPPORT(FAQ 13-14 ERROR MESSAGE & POSSIBLE SOLUTION ------- 15 APPENDIX 16 SPECIFICATIONS 16-17 FACTORY PRESET TIMING TABLE 18 - Acer AL1721 | AL1721 User's Guide - Page 2
with the instructions, may cause by turning the equipment off and on, the user is user's authority to operate the equipment. 2. Shielded interface cables and AC power monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing - Acer AL1721 | AL1721 User's Guide - Page 3
radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided. z The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local - Acer AL1721 | AL1721 User's Guide - Page 4
turning off the Power Switch for hours. BEFORE YOU OPERATE THE MONITOR FEATURES • 43.2cm(17") TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommened Resolutions should include the following items: 1. LCD Monitor 2. Owner's Manual 3. Power Cord 4. External Adapter 5. 15-pin D-Sub Cable - Acer AL1721 | AL1721 User's Guide - Page 5
INSTALLATION INSTRUCTIONS POWERCORD Power Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. - Acer AL1721 | AL1721 User's Guide - Page 6
green port). 5. Plug the power cable of your monitor into a nearby outlet. Plug the other end of the power cord into the power adapter. 6. Turn on your monitor and computer. Figure 1 Connecting Cables 1. D-SUB Cable 2. DC-Jack Power Cable 3. AC Power Cord 4. External Adapter 5. DVI Cable 6. Audio - Acer AL1721 | AL1721 User's Guide - Page 7
the full face of the monitor, then adjust the monitor's angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor's angle. • You are able to adjust the monitor's angle from -5° to 15°. Figure 2 NOTES • Do not touch the LCD screen when you change the - Acer AL1721 | AL1721 User's Guide - Page 8
picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the video cable from the monitor to the video card. • Press the power button to turn on the monitor position. The power indicator will light up. Figure 3 External Control Button EXTERNAL CONTROLS - Acer AL1721 | AL1721 User's Guide - Page 9
Button: Press this button to turn the monitor ON or OFF, And display the monitor's state. • Power Indicator: Blue - Power On mode. Orange - Power saving. Light blue - Off mode. • /MENU / ENTER : Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or - Acer AL1721 | AL1721 User's Guide - Page 10
HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press < or > to select the desired function. 3. Press the MENU-button to select the function that you want to adjust. 4. Press < or > to change the - Acer AL1721 | AL1721 User's Guide - Page 11
). Adjust picture Clock (available in Analog V. Position mode only). N/A Warm Set the color temperature to warm white. N/A Cool Set the color temperature to cool white. User /Red User/Green Adjusts Red/Green/Blue intensity. User/Blue 41L1700-786-7A 英文 10 - Acer AL1721 | AL1721 User's Guide - Page 12
Select input signal from analog (D-Sub) (only DualInput Model) N/A Digital N/A Information N/A Reset Select input signal from digital (DVI) Show the resolution, H/V frequency and input port of current iput timing. Clear each old status of Auto-configuration and set the color temperature to Cool - Acer AL1721 | AL1721 User's Guide - Page 13
, following a time-out period, will automatically switch to an OFF mode. This reduces the monitor's internal power supply consumption. After the video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to a "Screen Saver" feature - Acer AL1721 | AL1721 User's Guide - Page 14
SUPPORT (FAQ) Problem & Question Power LED is not on No Plug & Play Picture is fuzzy Picture bounces or a wave pattern is present in the picture The power LED is ON (light LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key. *Inspect the monitor's video cable and make sure - Acer AL1721 | AL1721 User's Guide - Page 15
the picture has not correct width. FOCUS adjusts the phase of the pixel clock signal. With a wrong phase adjustment the picture has horizontal disturbances in light picture. For FOCUS and CLOCK adjustment use "dot-pattern" or win 95/98 shut-down mode pattern. 41L1700-786-7A 英文 14 - Acer AL1721 | AL1721 User's Guide - Page 16
signal-cable is properly connected , If the connector is loose, tighten the connector's screws. 2. Check the signal -cable connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode ,set the computer to display mode given in the following table(See page 18 - Acer AL1721 | AL1721 User's Guide - Page 17
APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size Display Colors 16.2M Colors Dot Clock 165MHz Max. Resolution Plug & Play EPA ENERGY STAR® ON Mode 1280 Horizontal : 337.92mm Vertical : 270.34mm Power Source 100~264VAC,47~63Hz Environmental Considerations Operating - Acer AL1721 | AL1721 User's Guide - Page 18
) • Language • Auto configuration (Analog model only) • (Warm) Color • (Cool)Color • RGB Color temperature • Reset • OSD position . timeout • Display information • Exit 45 Watts Rated Power 1.5W rms (Per channel) CUL, FCC, VCCI, CCC, MPR II, CE, TÜV/GS, TCO'99, UL, ISO13406-2 41L1700-786-7A 英文 17 - Acer AL1721 | AL1721 User's Guide - Page 19
Preset Display Modes STANDARD VGA RESOLUTION 640 × 480 HORIZONTAL FREQUENCY(KHz) 31.469 VERTICAL FREQUENCY(Hz) 59.940 640 × 480 37.500 75.000 SVGA 800 × 600 800 × 600 37.879 - Acer AL1721 | AL1721 User's Guide - Page 20
Display Signal Cable DESCRIPTION PIN NO. Red 9. Green 10. Blue 11. Monitor Ground 12. DDC-return 13. R-Ground 14. G-Ground 15. B-Ground TMDS Data4+ 13. TMDS Data3+ 21. TMDS Data5+ 6. DDC Clock 14. +5V Power 22. TMDS Clock Shield GND(return for 7. DDC Data 15. +5V 23. TMDS
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
41L1700-786-7A
英文
.
TABLE OF CONTENTS
FOR YOUR SAFETY -------------------------------------------------- 1
SAFETY PRECAUTIONS -------------------------------------- 2
SPECIAL NOTES ON LCD MONITORS ------------------- 3
BEFORE YOU OPERATE THE MONITOR --------------------- 3
FEATURES -------------------------------------------------------- 3
PACKING LIST --------------------------------------------------- 3
INSTALLATION INSTRUCTIONS --------------------------- 4
CONTROLS AND CONNECTORS -------------------------- 5
ADJUSTING THE VIEWING ANGLE ----------------------- 6
OPERATING INSTRUCTIONS ------------------------------------- 7
GENERAL INSTRUCTIONS ---------------------------------- 7
HOW TO ADJUST A SETTING ------------------------------ 9
ADJUSTING THE PICTURE -----------------------------
10-11
PLUG AND PLAY -----------------------------------------------
12
TECHNICAL SUPPORT(FAQ) --------------------------------
13-14
ERROR
MESSAGE & POSSIBLE
SOLUTION -------
15
APPENDIX -------------------------------------------------------------
16
SPECIFICATIONS ------------------------------------------ 16-17
FACTORY PRESET TIMING TABLE ---------------------
18
CONNECTOR PIN ASSIGNMENT ------------------------
19