Acer AL512 AL512 Monitor Service Guide - Page 31

AL512/513 Service Manual (1) 6500K verify : press key to move cursor to 6500K at factory mode and press " 2 " key, and then check the color temperature is x=0.310 ± 0.03 y=0.330 ± 0.03 Y≧200 cd/m2 (2) 9300K verify : press key to move cursor to 9300K at factory mode and press " 2 " key, and then check the color temperature is x=0.283 ± 0.03 y=0.298 ± 0.03 4. Geometry: A. Pattern : Cross hatch B. Change each mode on the timing table in turns and excute the "Auto Adjust " function on the OSD menu , then all the data of the each mode will be auto saved after finish the "Auto Adjust " function. C. Until all of modes are agjusted, press " 1 " to exit OSD menu and switch power off to exit factory mode. -30- 9/20/2002