Acer AO722 Service Guide - Page 82

Replacing the USB/LED/Power/Card Reader Board IMPORTANT:Before installing the USB board, take care of the following items: • Check that LED isn`t broken • SLIDER work smoothly 1. Connect the cable to the board. 2. Turn the board over and place it in the lower case. 3. Replace the three or four screws (depending on SKU) to secure the module. HDD SKU SSD SKU 4. Connect the FFC cable to the module and close 5. Connect the FFC cable to the mainboard and close the cable latch. the cable latch. 72 Chapter 3