Acer AT110 F2 Acer AT110 F2 Service Guide - Page 48

SATA Controller Configuration Parameter SATA Controller SATA Mode Description When enabled, the SATA controller will function normally. Select the on chip SATA type. IDE: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the IDE emulation mode. This is not allowed to access RAID setup utility. RAID: When set to RAID, the SATA controller enables both its RAID and AHCI functions. You will be allows access the RAID setup utility at boot time. ACHI: When set to AHCI, the SATA controller enables its AHCI functionality. Then the RAID function is disabled and cannot be access the RAID setup utility at boot time. Displays the installed HDD devices. Option Enabled Disabled IDE RAID ACHI SATA Port 0/1/2/3/4/5 44