Acer AT110 F2 Acer AT110 F2 Service Guide - Page 54

Console Redirection Parameter Console Redirection Description Select whether to enable console redirection. Console redirection enables users to manage the system from a remote location. Select a terminal type to be used for console redirection. Option Serial Port 1 Serial Port 2 Disabled Terminal Type VT100 VT100+ ANSI VT-UTF8 9600 19200 57600 115200 7 8 None Even Odd Mark Space Bits per second Select the baud rate for console redirection. Data Bits Parity Select the Data Bits. A parity bit can be sent with the data bits to detect some transmission errors. Even: parity bi is 0 if the num of 1's in the data bits is even. Odd: parity bit is0if num of 1's the data bits is odd. Mark: parity bit is always 1. Space: Parity bit is always 0. Mark and Space Parity do not allow for error detection. Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The standard setting is 1 stop bit. Communication with slow devices may require more than 1 stop bit. Flow control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full, a 'stop' signal can be sent to stop the data flow. Once the buffers are empty, a 'start' signal can be sent to re-start the flow. Hardware flow control uses two wires to send start/stop signals. When this mode enabled, only text will be send. This is to capture Stop Bits 1 2 Flow Control None Hardware RTS/CTS Recorder Mode Enabled Disabled 50