Acer AT110 F2 Acer AT110 F2 Service Guide - Page 63

Boot Option Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the drive(s) specified is not bootable. By default, the server searches for boot devices in the following order: 1. Hard drive 2. UEFI device 3. Optical disc drive 4. Removable device 5. Network device Parameter UEFI Boot Device Priority Hard Disk Drive Priority Optical Disk Drive Priority Removable Disk Drive Priority Network Device Priority Quiet Boot Description Press Enter to configure the boot priority. Press Enter to configure the boot priority. Press Enter to configure the boot priority. Press Enter to configure the boot priority. Press Enter to configure the boot priority. Enable/Disable Quiet Boot function. Enabled Disabled On Off Disabled All, But Keyboard All Errors Force BIOS Keep Current Enabled Disabled Option Bootup NumLock POST Error Pause Enable or Disable Bootup NumLock function. Select whether to pause POST when a boot-up error is detected. Set display mode for Option ROM. Option ROM Messages BIOS Watch Timer Enable/Disable BIOS Watch Timing function. 59