Acer AT110 F2 Acer AT110 F2 Service Guide - Page 69

BIOS Beep Codes BIOS Beep Codes Table PEI Beep Codes # of Beeps 1 1 2 3 3 4 4 7 Description Memory not Installed. Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found DXE Core Firmware Volume was not found Recovery failed S3 Resume failed Reset PPI is not available DXE Beep Codes # of Beeps 1 4 5 5 6 7 8 Description Invalid password Some of the Architectural Protocols are not available No Console Output Devices are found No Console Input Devices are found Flash update is failed Reset protocol is not available Platform PCI resource requirements cannot be met BIOS Recovery Instruction AMI has an embedded recovery technique. In the event that the BIOS becomes corrupt the boot block can be used to restore the BIOS to a working state. To restore your BIOS, please follow the instructions listed below: Recovery Instruction: 1 2 3 Prepare a bootable handy drive or floppy diskette Copy the image file to the bootable hand drive or the bootable floppy diskette. Rename the image file to "FLASHABL.ROM". 65