Acer AT310 F2 Acer AT310 F2 Server Service Guide - Page 55

Console Redirection Parameter Console Redirection Terminal Type Bits per second Data Bits Parity Stop Bits Flow Control Description Select whether to enable console redirection. Console redirection enables users to manage the system from a remote location. Option Serial Port 1 Serial Port 2 Disabled Select a terminal type to be used for console redirection. VT100 VT100+ ANSI VT-UTF8 Select the baud rate for console redirection. Select the Data Bits. A parity bit can be sent with the data bits to detect some transmission errors. Even: parity bi is 0 if the num of 1's in the data bits is even. Odd: parity bit is0if num of 1's the data bits is odd. Mark: parity bit is always 1. Space: Parity bit is always 0. Mark and Space Parity do not allow for error detection. 9600 19200 57600 115200 7 8 None Even Odd Mark Space Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The standard setting is 1 stop bit. Communication with slow devices may require more than 1 stop bit. Flow control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full, a 'stop' signal can be sent to stop the data flow. Once the buffers are empty, a 'start' signal can be sent to re-start the flow. Hardware flow 51 1 2 None Hardware RTS/CTS