Acer AT310 F2 Acer AT310 F2 Server Service Guide - Page 72

2. You will see all the logical drives listed. 3. Click on Home to go back to the configuration menu. Assigning a Hot Spare Drive 4. Select a free disk marked as UNCONF GOOD and listed under Physical Drives. 5. Select Make Global HSP or Make Dedicated HSP options and then click on Go. 6. Click on Home to go back to the configuration menu. You will see the disk marked as Hot Spare in pink and listed under Physical Drives. 7. Now you can reboot the system and install the Operating System. Select Exit, click on Yes and press Ctrl+Alt+Del to reboot the system. 3041E-R RAID configuration Set RAID Controller in Legacy Mode NOTE. Currently, 3041E-R only supports Legacy mode. Please change PCI ROM Priority setting from EFI Compatible ROM to Legacy ROM in BIOS Setup. PCI ROM Priority [Legacy ROM] Entering RAID BIOS Utility Please press CTRL-C when you see the RAID BIOS during POST. After POST finished, the Adapter Selection page will show on the screen. Loading Factory Default Setting 1. Please press + to launch Global Properties. 2. Select Restore Defaults please press . 3. Press select Save changes then exit this menu and press . 4. The setting will change to default. Creating a RAID Volume 1. Select SAS3041E and press . 2. Select RAID Properties and press . 3. Select Create IM Volume to create RAID 1 and press . 4. Move selection to RAID Disk and press , press to create new array. 5. Press to create array. 6. Select Save change then exit this menu and press 7. Press 2 times and select Exit the configuration Utility and Reboot. Press . 68