Acer Aspire 1410 Acer Aspire 1410 and Aspire 1680 Service Guide - Page 86

No beep Error Messages, FRU/Action in Sequence, Reconnect the DIMM. - hard drive connector

Page 86 highlights

Error Message List No beep Error Messages FRU/Action in Sequence No beep, power-on indicator turns off and LCD is blank. Power source (battery pack and power adapter). See "Power System Check" on page 70. Ensure every connector is connected tightly and correctly. Reconnect the DIMM. LED board. System board. No beep, power-on indicator turns on and LCD is blank. Power source (battery pack and power adapter). See "Power System Check" on page 70. Reconnect the LCD connector Hard disk drive LCD inverter ID LCD cable LCD Inverter LCD System board No beep, power-on indicator turns on and LCD is blank. But you can see POST on an external CRT. Reconnect the LCD connectors. LCD inverter ID LCD cable LCD inverter LCD System board No beep, power-on indicator turns on and a blinking cursor shown on LCD during POST. Ensure every connector is connected tightly and correctly. System board No beep during POST but system runs correctly. Speaker System board Chapter 4 76

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

You can visit the Acer Aspire 1410 on the Acer site to download this or other manuals by visiting this link.

We apologize for any inconveniece.