Acer Aspire 2930 Aspire 2930 / 2930Z / 2430 Service Guide - Page 121

Replacing the Finger Print Reader 1. Replace the Finger Print Reader board in the upper cover. 2. Align the bracket and replace over the board. 3. Replace the single securing screw. NOTE: Carefully insert the FFC cable ends fully into the connector. Take care to line up the cable square with the connector before securing the FFC connector latch. Replacing the Upper Cover 1. Tilt the Upper cover and insert the left side of the cover into place. 2. Lower the casing into place and ensure that the I/O board FFC passes through the casing. Chapter 3 111