Acer Aspire 2930 Aspire 2930 / 2930Z / 2430 Service Guide - Page 67

Removing the Switch Cover CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is recommended that only fingers are used to remove the Switch Cover. 1. See "Removing the Battery Pack" on page 44. 2. Locate and remove the two securing screws as shown. Step Switch Cover Size M2.5*5 Quantity 2 Screw Type 3. Turn the computer over and open the LCD module to expose the Switch Cover. 4. Pry the right corner up and partially lift up. Do not pull the Switch Cover completely off at this time. IMPORTANT:Do not remove both sides of the Switch Cover together to prevent damage to the cover. Instead lift one end first and follow the instructions as directed. Chapter 3 57