Acer Aspire 5515 Acer Aspire 5515 Notebook Service Guide - Page 34

Main The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. Information Main System Time: System Date: System Memory: Extended Memory: Video Memory: PhoenixBIOS Setup Utility Advanced Security Power Boot [17:02:07] [09/09/2008] 633 KB 1789 MB [256MB] Exit Item Specific Help , , or selects field. Quiet Boot: Network Boot: D2D Recovery: SATA Mode: [Enabled] [Enabled] [Enabled] [IDE ACHI] F1 Help Esc Exit ↑↓ Select Item ←→ Select Menu F5/F6 Change Values F9 Setup Defaults Enter SelectXSub-Menu F10 Save and Exit NOTE: The screen above is for your reference only. Actual values may differ. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter System Time System Date System Memory Extended Memory Video Memory Quiet Boot Network Boot D2D Recovery SATA Mode Description Sets the system time. The hours are displayed with 24hour format. Sets the system date. This field reports the memory size of the system. Memory size is fixed to 633 KB. This field reports the memory size of the system. Memory size is fixed to 1789 MB. Shows the video memory size. Displays the logo screen while booting. Enables, disables the system boot from LAN (remote server). Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults. Control the mode in which the SATA controller should operate. Format/Option Format: HH:MM:SS (hour:minute:second) Format MM/DD/YYYY (month/day/year) N/A N/A 256, 128, or 64 MB Option: Enabled or Disabled Option: Enabled or Disabled Option: Enabled or Disabled Option: AHCI Mode or IDE Mode Chapter 2 23