Acer Aspire 7739 Aspire 7739, 7739G, 7739Z Notebook Service Guide - Page 44
Changing a Password, Set Supervisor Password, Setup Notice, This Setup Warning
View all Acer Aspire 7739 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
3. Press Enter twice without typing anything in the Enter New Password and Confirm New Password fields. The computer then sets the Supervisor Password parameter to Clear. 4. Press F10 to save changes and exit the BIOS Setup Utility. Changing a Password 0 1. Use the ↑ and ↓ keys to highlight Set Supervisor Password and press the Enter. The Set Supervisor Password box appears. Figure 2-6. Set Supervisor Password 2. Type the current password in the Enter Current Password field and press Enter. 3. Type a password in the Enter New Password field. Retype the password in the Confirm New Password field. Figure 2-7. Setup Notice 4. Press Enter. The computer sets User Password parameter to Set. NOTE: NOTE: Users can enable the Password on boot parameter. 5. Press F10 to save changes and exit the BIOS Setup Utility. If the verification is OK, the screen will show as following. Figure 2-8. This Setup Warning The password setting is complete after the user presses Enter. 2-10 System Utilities