Acer Aspire 8930G Aspire 8930G Service Guide - Page 44

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter System Time System Date System Memory Extended Memory VGA Memory Quiet Boot Power on display Network Boot F12 Boot Menu D2D Recovery Description Sets the system time. The hours are displayed with 24-hour format. Sets the system date. This field reports the memory size of the system. Memory size is fixed to 640MB This field reports the memory size of the extended memory in the system. Extended Memory size=Total memory size-1MB Shows the VGA memory size. VGA Memory size=64/128MB Determines if Customer Logo will be displayed or not; shows Summary Screen is disabled or enabled. Enabled: Customer Logo is displayed, and Summary Screen is disabled. Disabled: Customer Logo is not displayed, and Summary Screen is enabled. Auto: During power process, the system will detect if any display device is connected on external video port. If any external display device is connected, the power on display will be in CRT (or projector) only mode. Otherwise it will be in LCD only mode. Both: Simultaneously enable both the integrated LCD screen and the system's external video port (for an external CRT or projector). Enables, disables the system boot from LAN (remote server). Enables, disables Boot Menu during POST. Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults. Format/Option Format: HH:MM:SS (hour:minute:second) System Time Format MM/DD/YYYY (month/day/year) System Date Option: Enabled or Disabled Option: Auto or Both Option: Enabled or Disabled Option: Disabled or Enabled Option: Enabled or Disabled NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases. 38 Chapter 2