Acer Aspire M3410 Acer Aspire M3410 Desktop Service Guide - Page 12

On-board connectors • 1 AM3 CPU socket • 4 DDR3 memory sockets • 1 PCI Express x16 slot • 2 PCI Express x1 slot • 1 PCI slots • 6 SATA2 connectors • Four 2x5-pin Intel FPIO specification USB pin connectors (follow Intel FPIO Standard Specification) • One 2x5-pin Intel FPIO spec Microphone In/ Headphone Out pin connector • One 1x4 S/PDIF out header (for ALC662 SKU) • One 3-pin CPU fan connector (co-lay with 4-pin CPU fan connector) • One 3-pin system fan connector with linear circuit • One 24-pin + 4-pin ATX interface PS3/PS2 SPS connector • One 2x7-pin front panel I/O header • 1 Jumper for clear CMOS • 1 on board buzzer • 2 reserved 2-pin GPIO connector System BIOS • Size: 8Mbit • AMI Kernel with Acer skin/copyright Power supply • 300W in stable mode (Acer Assign System Power Unit) • Support 82+ PSU for EnergyStar 5.0 complaint • Design for RS880P+SB810 series chipset compatible system • Voltage design should be covered +5V, +3.3V, +12V, +5VSB, -12V (attention to 12V output capability) • Demand for both PFC/Non-PFC solutions (two different quotations are needed) • Minimum 4 Serial ATA power connector solution should be included (by default) • Minimum 1 big 4-pin power connector included • Minimum 1 small 4-pin power connector included • PFC version will not provide switch selector for 115/230V AC input but it should be universal for Europe and China • Non-PFC version should provide switch selector for 115/230V AC input and universal for worldwide • PS2 style. 4 Chapter 1