Acer B196L User Manual

Acer B196L Manual

Acer B196L manual content summary:

  • Acer B196L | User Manual - Page 1
    Acer LCD Monitor User's Guide
  • Acer B196L | User Manual - Page 2
    Acer LCD Monitor User's Guide Original Issue: 02/2013 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual to your computer. All correspondence
  • Acer B196L | User Manual - Page 3
    LCD monitor and do not indicate a problem. instructions marked on the product. Cleaning your monitor Please carefully follow these guidelines when cleaning the monitor: • Always unplug the monitor outlet. • Make sure both the LCD monitor and the computer are turned off before connecting any cable or
  • Acer B196L | User Manual - Page 4
    power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions. • Gradually increase the volume until you can hear it clearly and comfortably and without distortion. • After setting the volume level, do not
  • Acer B196L | User Manual - Page 5
    or its equivalent, 4.5 meters (15 feet) maximum length. Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to performance, indicating a need for service • the product does not operate normally after following the operating instructions
  • Acer B196L | User Manual - Page 6
    and obey all signs and instructions. Potentially explosive atmospheres include areas . Switch off the device near gas pumps at service stations. Observe restrictions on the use of radio equipment burden placed on the environment. We at Acer are very conscious of the environmental effects of
  • Acer B196L | User Manual - Page 7
    instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer
  • Acer B196L | User Manual - Page 8
    your company's health and safety department. The following section provides tips for more comfortable computer use. Finding your comfort zone Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or raising your sitting height to achieve maximum comfort. Observe the
  • Acer B196L | User Manual - Page 9
    eyes frequently. • Give your eyes regular breaks by looking away from the monitor and focusing on a distant point. • Blink frequently to keep your eyes good work habits Develop the following work habits to make your computer use more relaxing and productive: • Take short breaks regularly and
  • Acer B196L | User Manual - Page 10
  • Acer B196L | User Manual - Page 11
    local Manufacturer /Importer is responsible for this declaration: Product: LCD Monitor Model Number: B196L SKU Number: B196L xxxxxx ("x" = 0~9, a ~ z, or A ~ Z) Name of Responsible Party: Address of Responsible Party: Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose
  • Acer B196L | User Manual - Page 12
    instructions Cleaning your monitor Connecting/disconnecting the device Accessibility Safe listening Warnings Using electrical power Product servicing Additional safety information IT equipment recycling information Disposal instructions a setting Acer eColor Management User Troubleshooting VGA mode
  • Acer B196L | User Manual - Page 13
    that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide LCD monitor D-sub cable (Option) DVI cable (Option) AC power cord Audio Cable (Option)
  • Acer B196L | User Manual - Page 14
    English 2 ATTACHING/REMOVING THE BASE Install: Align the base with the stand and push the base towards the top of the monitor, and then rotate the base clockwise. Tighten the screw clockwise. Remove: Reverse the steps to remove the base.
  • Acer B196L | User Manual - Page 15
    to optimize the best viewing position, you can adjust the height/tilt/ swivel/pivot of the monitor. • Height Adjustment After pressing the top of the monitor then you can adjust the height of the monitor. 1 2 2 150mm 150mm • Tilt Please see the illustration below for an example of the tilt
  • Acer B196L | User Manual - Page 16
    Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. English 60o 60 • Monitor Pivot Before rotating the display,lift it to the top position and then push it back to the utmost degree. Rotate clockwise until the monitor stops at 90°. 90o 150
  • Acer B196L | User Manual - Page 17
    the power cord you use is the correct type required for your area. • The monitor has a universal power supply that allows operation in either 100/120 V AC or 220 easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication
  • Acer B196L | User Manual - Page 18
    pin assignment 1 5 6 10 11 15 15-pin color display signal cable PIN No. Description 1 Red 2 Green 3 Blue 4 Monitor ground 5 DDC-return 6 R-ground 7 G-ground 8 B-ground PIN No. Description 9 +5 V 10 Logic ground 11 Monitor ground 12 DDC-serial data 13 H-sync 14 V-sync 15 DDC-serial clock
  • Acer B196L | User Manual - Page 19
    12 NC PIN No. Description 13 NC 14 +5 V power 15 GND (return for +5 V hsync.vsync) 16 Hot-plug detection 17 TMDS data 0- 18 TMDS data 0+ 19 TMDS data 0/5 shield 20 NC 21 NC 22 TMDS clock shield 23 TMDS clock+ 24 DDC TMDS clock-
  • Acer B196L | User Manual - Page 20
    timing table English Mode Resolution 1 VGA 640 x 480 60 Hz 2 VGA 640 x 480 72 Hz 3 VGA 640 x 480 75 Hz 4 MAC 640 x 480 66.6 Hz 5 VESA 720 x 400 70 Hz 6 SVGA 800 x 600 56 Hz 7 SVGA 800 x 600 60 Hz 8 SVGA 800 x 600 72 Hz 9 SVGA 800 x 600 75 Hz 10
  • Acer B196L | User Manual - Page 21
    properly grounded AC outlet. 3 e Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 5 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. POWER AUDIO IN DVI-D IN VGA IN D-Sub
  • Acer B196L | User Manual - Page 22
  • Acer B196L | User Manual - Page 23
    eColor Management Operation instructions Step 1: Press " " Key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press " " or " " to select the mode Step 3: Press " AUTO " Key to confirm the mode and exit
  • Acer B196L | User Manual - Page 24
    : The following content is for general reference only. Actual product specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. For advanced
  • Acer B196L | User Manual - Page 25
    Adjusting the OSD position 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust. EN-16
  • Acer B196L | User Manual - Page 26
    / 4 Select Power-off USB charge ON/OFF to enable/disable Power-off USB charge function.
  • Acer B196L | User Manual - Page 27
    Product information Information 1920 x 1080 H:65KHz V:60Hz VGA Input S/N:ETL5309 1326350380B3742 1 Press the MENU key to bring up the OSD. 2 Using the / keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. EN-18
  • Acer B196L | User Manual - Page 28
    LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. VGA mode Problem No to the monitor. Check if the video signal cable is properly connected at the back of monitor. Unstable picture Abnormal picture Check if the computer system is
  • Acer B196L | User Manual - Page 29
    maximum or reset to their default settings. Check the power switch. Amber Check if the AC power cord is properly connected to the monitor. Check if the video signal cable is properly connected at the back of monitor. Check that the computer system is switched on and in power saving/ standby mode.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

Acer LCD Monitor
User's Guide