Acer Chromebook Spin 713 Lifecycle Extension Guide

Acer Chromebook Spin 713 Manual

Acer Chromebook Spin 713 manual content summary:

  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 1
    Acer Chromebook CP713-3W LIFECYCLE EXTENSION GUIDE
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 2
    Self-Repair 1-1 Disassembly Procedures 1-3 Troubleshooting 1-29 FRU (Field Replaceable Unit) List 1-30 Exploded Diagrams 1-31 Software Update 1-34 Personal Data Removal 1-35 i
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 3
    components than those listed above. NOTE: NOTE: For replacement parts, always use only Acer certified components in order to safeguard quality, optimum system performance, stability and reliability of the chapter "Disassembly Procedures" for step by step disassembly instructions. Self-Repair 1-1
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 4
    "Recovery" which is available in the User Manual of the product. NOTE: NOTE: In the event of not being able to create a Factory Default recovery media, it is possible to obtain a copy of the recovery media through Acer Customer Service (http://www.acer.com/support) This is not a free of charge
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 5
    will be voided. Before you start any of the procedures in this chapter, make sure to read the following safety guidelines and the respective instructions within the chapter. CAUTION! Turn off your computer and disconnect all power sources before opening the computer cover or panels. To avoid
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 6
    WEEE Annex VII Component 0 These components are classified as requiring selective treatment: Battery pack Touchpad module SSD module USB board Mainboard LCD panel 1-4 Disassembly Procedures
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 7
    Pre-disassembly Instructions 0 Do the following prior to starting any maintenance procedures: 1. Place the system on a stable work surface. 2. Remove the power adapter from the USB Type-C port (A
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 8
    Base Cover Removal 0 1. Remove nine (9) screws from the base cover (Figure 1-3). Figure 1-3. Base Cover Removal 2. Carefully pry up the base cover starting from the upper right edge side to release the latches. Then continue releasing the remaining latches on the upper, left, right, and bottom
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 9
    3. Grasp and remove the base cover from the system (Figure 1-5). Figure 1-5. Base Cover Removal Disassembly Procedures 1-7
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 10
    Battery Pack Removal 0 Prerequisite: Base Cover Removal 1. Find the battery pack (A) on the top assembly (Figure 1-6). 2. Detach the tape (B) securing the battery cable to the mainboard connector (Figure 1-6). 3. Detach the transparent mylar (C) securing the battery cable and keyboard FPC (Figure
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 11
    4. Disconnect the battery cable from the mainboard connector (D) (Figure 1-7). D Figure 1-7. Battery Pack Removal 5. Remove the battery pack from the top assembly (Figure 1-8). WEEE Annex VII Component: Battery Pack Figure 1-8. Battery Pack Removal + IMPORTANT: Follow local regulations for battery
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 12
    Touchpad Module Removal 0 Prerequisite: Battery Pack Removal 1. Disconnect the keyboard FPC from the mainboard connector (A) (Figure 1-9). A Figure 1-9. Touchpad Module Removal 2. Disconnect the touchpad FFC (B) from the touchpad module and mainboard connectors. Then remove the touchpad FFC from
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 13
    3. Gently peel off the conductive tape (C) to detach it from its designated slot on the touchpad module and top assembly (Figure 1-11). C Figure 1-11. Touchpad Module Removal 4. Remove three (3) screws securing the touchpad module in place (Figure 1-12). Figure 1-12. Touchpad Module Removal
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 14
    5. Using the screwdriver, push the guide pins (D) firmly to release them from the top assembly (Figure 1-13). 6. With one hand is placed underneath the touchpad module, push the touchpad module slightly
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 15
    SSD Module Removal 0 Prerequisite: Battery Pack Removal 1. Disconnect the 45-pin USB board FFC from the USB board connector (A) and the mainboard connector (B). Then remove the 45-pin USB board FFC (Figure 1-14). A B Figure 1-14. SSD Module Removal 2. Remove one (1) screw securing the SSD module
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 16
    3. Remove the SSD module (C) from the mainboard connector (D) (Figure 1-16). WEEE Annex VII Component: SSD Module C D Figure 1-16. SSD Module Removal 1-14 Disassembly Procedures
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 17
    Pack Removal 1. Disconnect the G-sensor cable from the USB board connector (A) (Figure 1-17). 2. Unroute the G-sensor cable from the cable guide (B) (Figure 1-17). B A Figure 1-17. LCD Module Removal 3. Disconnect the eDP cable from the mainboard connector (C) (Figure 1-18). C Figure 1-18. LCD
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 18
    4. Remove six (6) screws securing the LCD hinges in place (Figure 1-19). Figure 1-19. LCD Module Removal 5. Lift the top assembly until it is fully open (Figure 1-20). Figure 1-20. LCD Module Removal 1-16 Disassembly Procedures
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 19
    6. Close the top assembly and lift both LCD hinges until they are fully extended (Figure 1-21). Figure 1-21. LCD Module Removal 7. Open the top assembly again. Then remove the LCD module away from the top assembly (Figure 1-22). Figure 1-22. LCD Module Removal Disassembly Procedures 1-17
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 20
    USB Board Removal 0 Prerequisite: Ensure that the Fan has been disassembled prior removing the USB board. 1. Remove three (3) screws (A) securing the left side of LCD hinge in place (Figure 1-23). A Figure 1-23. USB Board Removal 2. Lift the top assembly until it is fully open (Figure 1-24). Figure
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 21
    (C) (Figure 1-26). 6. Disconnect the fingerprint cable from the USB board connector (D). Then unroute the WLAN antennas cables from the cable guides (Figure 1-26). 7. Remove two (2) screws (E) securing the USB board in place (Figure 1-26). C B E D Figure 1-26. USB Board Removal Disassembly
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 22
    8. Release the USB board (F) from the USB port slot and guide pin (G) on the top assembly. Then remove the USB board (Figure 1-27). F G WEEE Annex VII Component: USB Board Figure 1-27. USB Board Removal 1-20 Disassembly Procedures
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 23
    Mainboard Removal 0 Prerequisite: Ensure that the Heatsink and Fan have been disassembled prior removing the mainboard. 1. Remove three (3) screws (A) securing the right side of LCD hinge in place (Figure 1-28). A Figure 1-28. Mainboard Removal 2. Lift the top assembly until it is fully open (Figure
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 24
    Removal 4. Gently peel off the mylar (B) from the mainboard. While detaching the mylar, be careful to release it from the guide pins (C) (Figure 1-31). 5. Detach the adhesive tape (D) securing the keyboard backlight FPC (Figure 1-31). B C D Figure 1-31. Mainboard Removal 6. Disconnect the
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 25
    the mainboard in place (Figure 1-32). J E K F G H I Figure 1-32. Mainboard Removal 13. Release the mainboard (L) from the I/O ports slots and guide pins (M) on the top assembly. Then remove the mainboard (Figure 1-33). M L WEEE Annex VII Component: Mainboard Figure 1-33. Mainboard Removal
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 26
    Figure 1-34. Mainboard + IMPORTANT: Circuit boards >10 cm² have been highlighted with a yellow rectangle as shown in Figure 1-34. Remove the circuit board and follow local regulations for disposal. 1-24 Disassembly Procedures
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 27
    LCD Panel Removal 0 Prerequisite: LCD Module Removal 1. Pry the LCD panel from the left side to release latches (Figure 1-35). Figure 1-35. LCD Panel Removal 2. Continue along the upper side of the LCD panel (Figure 1-36). Figure 1-36. LCD Panel Removal Disassembly Procedures 1-25
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 28
    3. Continue along the right side of the LCD panel (Figure 1-37). Figure 1-37. LCD Panel Removal 4. Carefully lift the LCD panel (A) (Figure 1-38). ! CAUTION: Do not remove the LCD panel yet because the eDP cable has not been released from the LCD hinges. WEEE Annex VII Component: LCD Panel A
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 29
    5. Release the eDP cable from the rubber (B) inside the left LCD hinge cap (Figure 1-39). B Figure 1-39. LCD Panel Removal 6. Remove the LCD panel. Disassembly Procedures 1-27
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 30
    Top Assembly Removal (Keyboard Removal) 0 Prerequisite: Ensure that the LCD Module, WLAN Antenna, Fingerprint Module, USB Board, and Mainboard have been disassembled prior removing the top assembly. NOTE: NOTE: The keyboard is included as part of the top assembly and cannot be disassembled. In the
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 31
    attempt to open the computer yourself; contact your dealer or authorized service center for assistance. Troubleshooting tips 0 This computer incorporates an advanced design that delivers on-screen error message reports to help you solve problems. If the system reports an error message or an error
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 32
    FRU (Field Replaceable Unit) List Please contact your local service center to find out how to obtain the part or replace your device. 1-30 FRU (Field Replaceable Unit) List
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 33
    Exploded Diagrams 1 2 3 4 5 6 7 8 11 9 10 12 13 14 15 16 17 Figure 1-41. System Exploded Diagram Exploded Diagrams 1-31
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 34
    Table 1-2. System Exploded Diagram No. Description 1 Top Assembly 2 Conductive Tape 3 Mylar (for mainboard) 4 Insulator Mylar 5 Acetate Tape 6 Speakers 7 USB Board FFC (low speed) 8 Fan 9 USB Board FFC (high speed) 10 USB Board 11 Mainboard 12 Touchpad FFC 13 Touchpad Module 14 WLAN
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 35
    1 2 5 3 4 6 7 Figure 1-42. LCD Assembly Exploded Diagram Table 1-3. LCD Assembly Exploded Diagram No. Description 1 LCD Module 2 Camera Module 3 G-sensor Cable 4 G-sensor Board LCD Hinge L 5 LCD Hinge R 6 eDP Cable 7 LCD Cover Exploded Diagrams 1-33
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 36
    Software Update Updating your software 0 Please visit http://go.acer.com/?id=17883 1-34 Software Update
  • Acer Chromebook Spin 713 | Lifecycle Extension Guide - Page 37
    hold down the Shift key while you select the Power icon > Restart in the lower-right corner of the screen. After your computer restarts, select Troubleshoot > Reset this PC. Option 3: Select Start , then press and hold down the Shift key while you select the Power icon > Restart to restart your
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37

LIFECYCLE EXTENSION
GUIDE
Acer Chromebook CP713-3W