Acer EB243YU User Manual

Acer EB243YU Manual

Acer EB243YU manual content summary:

  • Acer EB243YU | User Manual - Page 1
    Acer LCD Monitor User's Guide
  • Acer EB243YU | User Manual - Page 2
    . All Rights Reserved. Acer LCD Monitor User's Guide Original Issue: 03/2018 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary
  • Acer EB243YU | User Manual - Page 3
    The following are normal with the LCD monitor and do not indicate a problem. • Due to the nature of the all warnings and instructions marked on the product. Cleaning your monitor Please carefully follow these guidelines when cleaning the monitor: • Always unplug the monitor before cleaning. •
  • Acer EB243YU | User Manual - Page 4
    Safe listening To protect your hearing, follow these instructions. • Gradually increase the volume until you can hear it clearly and comfortably and without distortion. • After setting the volume level, do not increase it after
  • Acer EB243YU | User Manual - Page 5
    • the product has been dropped or the case has been damaged • the product exhibits a distinct change in performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating
  • Acer EB243YU | User Manual - Page 6
    recycling, please go to this website: http://www.acergroup.com/public/Sustainability/ Visit www.acer-group.com for further information on the features and benefits of our other products. Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution
  • Acer EB243YU | User Manual - Page 7
    sections provide suggestions on how to reduce eyestrain. Eyes • Rest your eyes frequently. • Give your eyes regular breaks by looking away from the monitor and focusing on a distant point. • Blink frequently to keep your eyes from drying out. Display • Keep your display clean. • Keep your head at
  • Acer EB243YU | User Manual - Page 8
    often. • Perform some stretching exercises. • Breathe fresh air as often as possible. • Exercise regularly and maintain a healthy body. • In order to prevent damage to the monitor, do not lift the monitor by its base. viii
  • Acer EB243YU | User Manual - Page 9
    (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Product: Trade Name: Model Number: SKU Number: LCD Monitor Acer EB243YU EB243Y xxxx; ("x" = 0~9, a ~ z, A ~ Z, or blank) We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in
  • Acer EB243YU | User Manual - Page 10
    following local Manufacturer /Importer is responsible for this declaration: Product: LCD Monitor Model Number: EB243YU SKU Number: EB243Y xxxx; ("x" = 0~9, a ~ z, A ~ Z or Blank) Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St. Suite
  • Acer EB243YU | User Manual - Page 11
    instructions iii Cleaning your monitor iii Connecting/disconnecting the device iii Accessibility iii Safe listening iv Warnings iv Using electrical power iv Product servicing Product the System setting 14 Product the Information setting 14 Troubleshooting 14 HDMI 1.4 /DP model 15
  • Acer EB243YU | User Manual - Page 12
    that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide AC power cord LCD monitor EB3 series-EB243YU USER GUIDE DP cable (Option) HDMI 1.4 cable (Option) 1
  • Acer EB243YU | User Manual - Page 13
    from the packaging and place it on a stable and level workspace. 2. Remove the monitor from the packaging, by aligning the front-end of the bracket with the corresponding slot to fasten it. By doing so, the bracket shall be installed on the monitor. Remove: Reverse the steps to remove the base. 2
  • Acer EB243YU | User Manual - Page 14
    for the country in which the equipment will be installed. Power saving The monitor will be switched to "power saving" mode by the control signal from installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol
  • Acer EB243YU | User Manual - Page 15
    Connector pin assignment 19-pin color display signal cable PIN No. 1 2 3 4 5 6 7 8 9 10 Description TMDS data 2+ TMDS data 2 shield TMDS data 2TMDS data 1+ TMDS data 1 shield TMDS data 1TMDS data 0+ TMDS data 0 shield TMDS data 0TMDS clock+ PIN No. 11 12 13 14 15 16 17 18 19 Description TMDS
  • Acer EB243YU | User Manual - Page 16
    20-pin color display signal cable PIN No. 1 2 3 4 5 6 7 8 9 10 Description Lane0(p) GND Lane0(n) Lane1(p) GND Lane1(n) Lane2(p) GND Lane3(n) Lane3(p) PIN No. 11 12 13 14 15 16 17 18 19 20 Description GND Lane3(n) Config1 Config2 AUX_CH (n) GND AUX_CH (p) Hot Plug Detect DP Power_Return DP Power
  • Acer EB243YU | User Manual - Page 17
    Standard timing table Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 VGA VGA MAC VESA SVGA SVGA SVGA XGA XGA VESA VESA SXGA VESA WXGA+ WXGA WXGA WSXGA+ UXGA UXGA QHD Resolution 640×480 640×480 640×480 720×400 800×600 800×600 800×600 1024×768 1024×768 1152×864 1280×960 1280×1024 1280×720
  • Acer EB243YU | User Manual - Page 18
    power cord to the monitor, then to a properly grounded AC outlet. 3. Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 4. If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. 7
  • Acer EB243YU | User Manual - Page 19
    USER CONTROLS Power Switch / Power LED: To turn the monitor ON or OFF. Lights up to indicate the power is turned ON. Using the Shortcut Menu D C B A Power Press the function button to open the shortcut
  • Acer EB243YU | User Manual - Page 20
    How to adjust a setting Mode Management Menu Operation instructions Acer Mode Management Menu Step 1: Press " " Key to open the Mode Management Menu and access the scenario modes Step 2: Press "" or "" to select the mode Step 3:
  • Acer EB243YU | User Manual - Page 21
    : The following content is for general reference only. Actual product specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor. Press the key to open the OSD. You can use the OSD to adjust the picture quality, OSD setting and general settings. For advanced settings
  • Acer EB243YU | User Manual - Page 22
    9. ACM: Turn ACM on or off. Note: Set to "On", will be based on the current screen to dynamic contrast adjustment. 10. Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology can simulate high-resolution images by boosting the pixel density of the original source to make
  • Acer EB243YU | User Manual - Page 23
    Adjusting the Audio setting 1. Press the key to bring up the OSD. 2. Using the / keys, select Audio from the OSD. Then navigate to the feature you wish to adjust. 3. Use the / keys to adjust the sliding scales. Adjusting the Performance setting 1. Press the key to bring up the OSD. 2. Using the /
  • Acer EB243YU | User Manual - Page 24
    Adjusting the OSD setting 1. Press the key to bring up the OSD. 2. Using the / keys, select OSD from the OSD menu. Then navigate to the feature you wish to adjust. 3. Use the / keys to adjust the sliding scales. 4. The Setting menu can be used to adjust the screen Menu Language,OSD Timeout and other
  • Acer EB243YU | User Manual - Page 25
    settings to be set through the software on the PC. Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent via software. Product the Information setting 1 Press the key to bring up the OSD. 2 Using the / keys, select Information from the
  • Acer EB243YU | User Manual - Page 26
    your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem HDMI 1.4 /DP model Problem LED status the signal cable or switching off the monitor. Note: Acer monitor is purposed for video and visual display of information obtained from electronic
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

Acer LCD Monitor
User's Guide