Acer ET2 Quick Start Guide

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1.

To clean the LCD monitor screen:

•

Turn off the LCD monitor and unplug the power cord.

•

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2.

Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3.

Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4.

Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5.

Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside

this range may result in permanent damage.

6.

Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

•

Monitor-to-PC signal cable is frayed or damaged.

•

Liquid spills onto the LCD monitor or the monitor is exposed to rain.

•

The LCD monitor or case is damaged.

7.

In order to prevent damage to the LCD pannel, do not place the monitor face down on a surface.

Connecting your monitor to a computer

1.

Turn off your computer and unplug your computer's power cord.

2.

Connect the signal cable to the VGA (optional) and /or HDMI (optional) input socket of the monitor, and the VGA

(optional) and /or HDMI (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews

on the signal cable connector.

3.

Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with

the audio cable.

4.

Insert the monitor power cable into the power port at the back of the monitor.

5.

Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.

VGA

Audio