Acer Ferrari 1000 Service Guide - Page 95

Load Default Settings, External Diskette Drive Check, Error Message, FRU/Action in Sequence

Page 95 highlights

Error Message Shadow RAM Failed at offset: nnnn System RAM Failed at offset: nnnn Extended RAM Failed at offset: nnnn System battery is dead Replace and run Setup System CMOS checksum bad Default configuration used System timer error Real time clock error Previous boot incomplete Default configuration used Memory size found by POST differed from CMOS Diskette drive A error Incorrect Drive A type - run Setup System cache error - Cache disabled CPU ID: DMA Test Failed Software NMI Failed Fail-Safe Timer NMI Failed Device Address Conflict Allocation Error for device Failing Bits: nnnn Fixed Disk n FRU/Action in Sequence BIOS ROM System board DIMM System board DIMM System board Replace RTC battery and Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Run Load Default Settings in BIOS Setup Utility. DIMM System board Check the drive is defined with the proper diskette type in BIOS Setup Utility. See External Diskette Drive Check. Check the drive is defined with the proper diskette type in BIOS Setup Utility. System board System board DIMM System board DIMM System board DIMM System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board DIMM BIOS ROM System board None Chapter 4 85

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.