Acer H5370BD User Manual
Acer H5370BD Manual
 |
View all Acer H5370BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer H5370BD manual content summary:
- Acer H5370BD | User Manual - Page 1
Acer Projector H5370BD/E131D/HE-711J Series User's Guide - Acer H5370BD | User Manual - Page 2
Reserved. Acer Projector H5370BD/E131D/HE-711J Series User's Guide Original Issue: 12/2012 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or - Acer H5370BD | User Manual - Page 3
instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning removing the power supply unit from the projector. • If the system has multiple These openings must not be blocked or covered. The openings should never be blocked - Acer H5370BD | User Manual - Page 4
exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • This product product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the - Acer H5370BD | User Manual - Page 5
. Keep them out of the reach of small children. Additional safety information • Do not look into the projector's lens when the lamp is on. The bright may hurt your eyes. • Turn on the projector first and then signal sources • Do not place the product in following environments: • Space that is poorly - Acer H5370BD | User Manual - Page 6
fire. To temporarily turn off the lamp, press HIDE on the remote control. • The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. • Do not operate lamps beyond the rated lamp life. It could cause - Acer H5370BD | User Manual - Page 7
people speaking near you. Disposal instructions Do not throw this electronic device into the acer-group.com/public/ Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: "Lamp(s) contain Mercury, Dispose Properly." Lamp - Acer H5370BD | User Manual - Page 8
. • Do not use lens cap when projector is in operation. • When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed - Acer H5370BD | User Manual - Page 9
Projector 10 Turning the projector off 11 Adjusting the Projected Image 12 Adjusting the Height of Projected Image 12 How to optimize image size and distance 13 How to get a preferred image size by adjusting distance and zoom 15 User Controls 17 Installation menu 17 Acer Empowering - Acer H5370BD | User Manual - Page 10
Appendices 30 Troubleshooting 30 LED & Alarm Definition Listing 35 Cleaning and replacing the dust filters 36 Replacing the Lamp 37 Ceiling Mount Installation 39 Specifications 42 Compatibility modes 44 Regulations and safety notices 49 - Acer H5370BD | User Manual - Page 11
Product Features This product is a single-chip DLP® projector. Outstanding features include: • DLP® technology • 1280 x 720 720P resolution 4:3 / 16:9 / L.Box aspect ratio supported • Enables projecting 3D content via DLP Link Technology: Blue-Ray 3D supported and Nvidia 3DTV Play Ready • Enrich - Acer H5370BD | User Manual - Page 12
immediately if any thing is missing. MENU LAMP SOURC SYNC TEMP POWER Projector Power cord VGA cable Security card 2 x Batteries E131D/ HE-711J/ H5370BD Series P/N:MC.JG511.002 Carrying case Quick Start Guide User's Guide (CD-ROM) Remote control Dust Filters (Optional) MHL cable - Acer H5370BD | User Manual - Page 13
Projector Overview Projector Outlook Front / upper side 3 65 4 21 MENU LAMP SOURC SYNC TEMP POWER 7 8 # Description 1 Power button 2 Control panel 3 Zoom lever 4 Focus ring Rear side # Description 5 Zoom lens 6 Remote 8 RS232 connector 9 Audio input connector 10 Power socket - Acer H5370BD | User Manual - Page 14
6 POWER Description Power Indicator LED Lamp Indicator LED Temp Indicator LED Automatically synchronizes the projector to the input source. Changes the active source. See the contents in "Turning the Projector On/Off" section. 7 Empowering key Unique Acer functions: e3D, eView, eTimer, ePower - Acer H5370BD | User Manual - Page 15
English Remote Control Layout 1 2 5 7 9 11 13 14 15 16 20 22 24 26 5 3 4 6 8 10 12 17 19 18 21 23 25 27 # Icon Function 1 Infrared transmitter 2 POWER Description Sends signals to the projector. Refer to the "Turning the Projector On/Off" section. 3 3D Press "3D" to select 3D models. 4 - Acer H5370BD | User Manual - Page 16
(480i/576i/1080i). 18 VIDEO To change source to COMPOSITE VIDEO. 19 VGA Press "VGA" to change source to the VGA connector. This connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync. 20 S-VIDEO To change source to S-Video. 21 SD/USB A No function - Acer H5370BD | User Manual - Page 17
High-Definition Link) Control 3 2 1 4 5 6 7 8 9 10 11 12 # Icon Component Description 1 Long pressing to trigger the MHL control mode. 2 MUTE To turn on/off the volume. 3 RESYNC Press to select the three MHL control modes. (Navigation/ Multi-Media/Numeric) 4 MENU Press to - Acer H5370BD | User Manual - Page 18
8 Getting Started English USB RS232 USB Connecting the Projector S-Video Output MHL DVD player Video Output 2 1 HDMI 4 12 3 HDMI HDMI Y D-Sub 7 5 6 Y D-Sub USB 2 (MHL) 1 Y S.VIDEO Pb GB VIDEO VGA!IN! Pr 8 R HDTV adapter RS 232 AUDIO IN R BG 10 9 9 11 RS232 DVD player, - Acer H5370BD | User Manual - Page 19
English 9 Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: USB cable needs powered extender if the length is over 5 m. - Acer H5370BD | User Manual - Page 20
securely connected. The Power indicator LED will flash red. 2 Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue. 3 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. • If - Acer H5370BD | User Manual - Page 21
down, and the LED temp indicator will turn solid red. Contact your local dealer or service center. • "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the - Acer H5370BD | User Manual - Page 22
English 12 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with tilt adjusting wheels for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheels to fine-tune the display angle. Tilt adjusting wheel - Acer H5370BD | User Manual - Page 23
Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 80" and 87". Note: Remind as below figure, the space - Acer H5370BD | User Manual - Page 24
14 English Screen size Top Screen size Top Desired Distance (m) Diagonal (inch) (Min zoom) W (cm) x H (cm) From base to Diagonal top of image (inch) (cm) (Max zoom) W (cm) x 331 372 291 645 x 363 408 10.3 274 606 x 341 383 300 665 x 374 420 Zoom Ratio: 1.1x - Acer H5370BD | User Manual - Page 25
70 cm from base to top of image 1.9 m C 1.7 m B Desired Distance The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. Example: to obtain an image size of 50" set the projector at a distance 1.7 m and 1.9 m from the screen and adjust the zoom - Acer H5370BD | User Manual - Page 26
16 English Desired Image Size Distance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.1x W (cm) x H (cm) 66 x 37 89 x 50 111 x 62 133 x 75 155 x 87 177 x 100 199 x 112 221 x 125 266 x 149 332 x 187 398 x 224 - Acer H5370BD | User Manual - Page 27
Turn on the projector by pressing "Power" button on the control pad. 2 Press the menu button on the control pad to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance - Acer H5370BD | User Manual - Page 28
Display Menus section for more detail. Acer ePower Management "Acer ePower Management" provides user one shortcut to save the projector life. Please refer to Onscreen Display section for more detail. Acer e3D Management "Acer e3D Management" provides the 3D functions. Please refer to Onscreen - Acer H5370BD | User Manual - Page 29
as described above. • Press "MENU" on the remote control or control panel, the screen will return to the main menu. • To exit OSD, press "MENU" on the remote control or control panel again. The OSD menu will close and the projector will automatically save the new settings. Main menu Setting - Acer H5370BD | User Manual - Page 30
: Memorize user's settings. Use this function to choose a proper color according to the wall. There are several choices, including white, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone. Adjust the brightness - Acer H5370BD | User Manual - Page 31
CT1 (5500K), CT2 (6500K, Native), CT3 (7500K), User mode. R Gain Adjusts the red gain for color temperature optimization that delivers enhanced color saturation for bright, true-to-life images. White Peaking Increases the brightness of whites that are not supported under computer or HDMI mode. - Acer H5370BD | User Manual - Page 32
• Auto: Automatically adjusts projection location of image. • Desktop • Ceiling: Turns the image upside down for ceiling-mounted projection. Aspect Ratio Auto Keystone Manual Keystone Use this function to choose your desired aspect ratio. • Auto: Keep the image with original width-higth - Acer H5370BD | User Manual - Page 33
Tracking Synchronizes the signal timing of the projector with the graphics card. If you color range data. HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen. • Auto: Position", "Frequency" and "Tracking" functions are not supported under HDMI or Video mode. Note: "HDMI - Acer H5370BD | User Manual - Page 34
the changes will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use memorize the instructions below. Notice: Before proceeding with the following steps, make sure that the "Keystone" is set to the default value 0 and the aspect ratio is - Acer H5370BD | User Manual - Page 35
, the projector will request user to enter password when switch on the projector . Both "User Password" and "Administrator Password" can be accepted for this dialogue. User Password • Press to setup or change the "User Password". • Press number keys to set your password on the remote control and - Acer H5370BD | User Manual - Page 36
avoid other users change that arbitrarily. Choose "OFF" to unlock startup screen. Management ECO Mode High Altitude Turn Off Mode Auto Shutdown Lamp Hour Elapse Lamp Reminding Lamp Hour Reset Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce - Acer H5370BD | User Manual - Page 37
to adjust the notification volume when turning the projector on/off. Alarm Volume Select this function to adjust the volume of any warning notifications. 3D 3D Choose "On" to enable DLP 3D function. • On: Choose this item while using DLP 3D glasses, 120Hz 3D capable graphics cards and HQFS - Acer H5370BD | User Manual - Page 38
28 2D to 3D 3D Format 2D to 3D Support most of the 2D contents. Choose "On" to enable 2D to 3D function supported by DLP 3D technology. Please use DLP 3D glasses to have correct performance. "2D to 3D" is only supported under HDMI mode. Mode Choose mode of "Photo", "Movie" and "User" as your - Acer H5370BD | User Manual - Page 39
29 Language English Language Choose the multilingual OSD menu. Use the or key to select your preferred menu language. • Press to confirm the selection. - Acer H5370BD | User Manual - Page 40
or broken. • Check if the projector lamp has been securely installed. Please refer to the "Replacing the Lamp" section. • Make sure you have removed the lens cap and the projector is switched on. 2 Partial, scrolling • Press "RESYNC" on the remote control or control panel. or incorrectly - Acer H5370BD | User Manual - Page 41
mode of your graphics card to make it compatible with the projector. 7 Image is out of focus • Make sure the lens cap is removed. • Adjusts the focus ring on the projector lens. • Make sure the projection screen is within the required distance of 3.3 to 33.8 feet (1.0 to 10.3 meters) from the - Acer H5370BD | User Manual - Page 42
closer to or further from the screen. Press "MENU" on the remote control. Go to "Image -> Aspect Ratio" and try different settings or press"Aspect Ratio" on the remote control to adjust directly. If possible, reposition the projector so that it is centered on the screen. Press the "Keystone - Acer H5370BD | User Manual - Page 43
1 Message Message Reminder Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to - Acer H5370BD | User Manual - Page 44
out or makes a popping sound When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section. - Acer H5370BD | User Manual - Page 45
Message Standby (power cord plugged in) Power button ON Lamp retry Lamp LED Red -- --- Turning off -- (cooling state) Turning off -- (cooling completed) Error (thermal failure) -- Error (fan lock failure) -- Error (lamp breakdown) Error (color Wheel fail) V Quick flashing Temp LED - Acer H5370BD | User Manual - Page 46
can cause overheating and damage the projector. 1 RESYNC MENU POWER LAMP TEMP SOURCE 2 RESYNC MENU POWER LAMP TEMP SOURCE Follow these steps: 1 Turn the projector off. Wait for the Power LED or the filter is broken, please contact your local dealer or service center to obtain a new filter. - Acer H5370BD | User Manual - Page 47
Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the - Acer H5370BD | User Manual - Page 48
English 38 To Change the Lamp 1 Turn off the projector by pressing the power button. 2 Allow the projector at least 30 mins to cool down. 3 Disconnect the power cord. 4 Open the screw cover on the right side of the projector. (Illustration #1) 5 Use a screwdriver to loosen the screw on the right - Acer H5370BD | User Manual - Page 49
If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. 20mm mm13 m4m9.9 8.4 mm 130 mm Note: Screws are not included. Please obtain the appropriate - Acer H5370BD | User Manual - Page 50
English 40 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Screw Type B Smaller Washer Large Washer Projector Bracket Supports projector and allows - for adjustments Spacer - For heat dissipation Note: It is recommended that you - Acer H5370BD | User Manual - Page 51
appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models H5370BD/E131D/HE-711J Screw Type B Diameter (mm) Length (mm) 3 20 Washer Type Large Small V V 55.00 mm 55.00 mm 82.30 mm 75.28 - Acer H5370BD | User Manual - Page 52
(diagonal) Projection distance Throw ratio Horizontal scan rate Vertical refresh scan rate Lamp type Keystone correction Audio Weight Dimensions (L x W x H) Remote control Digital Zoom Power supply Power consumption Operating temperature I/O connectors DLP® Native: 720P (1280 x 720) , Maximum: UXGA - Acer H5370BD | User Manual - Page 53
43 English Standard package contents • AC power cord x1 • VGA cable x1 • Remote control x1 • Batteries x 2 (for remote control) • User's Guide (CD-ROM) x1 • Quick start guide x1 • Security card x 1 • Carrying case x1 - Acer H5370BD | User Manual - Page 54
44 English Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA Power Mac G4 i Mac DV (G3) Resolution 640x480 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 1024x768 1152x864 - Acer H5370BD | User Manual - Page 55
English 45 2 VGA Analog - Extended Wide timing Modes WXGA WXGA+ WUXGA WSXGA WSVGA Resolution 1280x768 1280x768 1280x768 1280x720 1280x720 1280x800 1366x768 1440x900 1920x1080-RB 1920x1080-EIA 1920x1200-RB 1680x1050 1024x600 V.Frequency [Hz] 60 75 85 - Acer H5370BD | User Manual - Page 56
91.15 60.00 75.00 65.32 75.00 31.50 35.00 37.88 48.36 68.68 75.20 60.30 Modes WXGA WXGA+ WUXGA Resolution 1280x768 1280x768 1280x768 1280x720 1280x720 1280x800 1366x768 1440x900 1920x1080-RB 1920x1080-EIA 1920x1200-RB V.Frequency [Hz] 60 75 85 60 119.858 60 - Acer H5370BD | User Manual - Page 57
480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p Resolution 720x480 720x480 720x576 720x576 1280x720 1280x720 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 4 HDMI - 1.4a 3D Timing V.Frequency [Hz] 59.94(29.97) 59.94 50(25) 50 60 50 60(30) 50(25) 60 50 24/23.97 H.Frequency [KHz - Acer H5370BD | User Manual - Page 58
48 English C. MHL Digital Modes VGA 480i 576i 480p 480p_2x 576p 576p_2x 720p 720p 1080i 1080i 1080p 1080p 1080p Graphic source monitor range limits Resolution 640x480 720x480 (1440x480) 720x576 (1440x576) 720x480 1440x480 720x576 1440x576 1280x720 1280x720 1920x1080 1920x1080 1920x1080 1920x1080 - Acer H5370BD | User Manual - Page 59
and safety notices FCC notice This device has been tested and found to comply with the limits for a Class will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user - Acer H5370BD | User Manual - Page 60
a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors - Acer H5370BD | User Manual - Page 61
20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Declare under our own responsibility that the product: Product: Projector Trade Name: Acer Model Number: H7P1141 H5370BD/E131D/HE-711J To which this declaration refers conforms to the relevant standard or other - Acer H5370BD | User Manual - Page 62
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
 |
 |
Acer Projector
H5370BD/E131D/HE-711J Series
User's Guide