Acer H6510BD Acer Projector H6510BD, P1340W, X1140, X1240 Service Guide - Page 12

3D Projection: For X1140A/X1240/X1140: (1) This function is only for 3D contents and must wear 3D glasses. TI DDP DDP2431 • Can support 120Hz 3D source from PC (2) 3D Function Detail Description : − 3D: DLP 3D, off. Default is Off. − DLP 3D Select this item while using DLP 3D glasses, quad buffer (NVIDIA/ATI...) graphics card. − "3D Sync Invert" is adjustable when above "3D" is on. Otherwise gray out. When you discover the inversion of the image depth (for your Left/Right eyes), do the invert action to solve this condition. 3D Sync Invert only enable for DLP 3D, otherwise it will be gray out When 3D is enabled, Display Mode and Color temperature (in Color Page) is not adjustable. − Function disable : When meeting 120Hz (no matter 3D on or off, HSG only one set value), if end user adjust adjustable items (ex. brightness) , the value will not been stored and only for that use only. − If non-3D mode (120Hz), keep normal/same brightness. − 3D function can be opened when 100/120Hz for PC source. − Refresh rate change to not supported 3D timings under 3D mode, please show warning message of "Input Not Supported under 3D mode", to enforce user to change back. − 3D Warning message When 3D is enabled, this screen will appear after exit OSD menu. It shows only once of that source after power on. (one source one time only) Show it while switching to another source which is set as 3D on and the message was not shown in that source after power on. Not show it while timing changes. (or adjust to off 3D Warning message) Priority: PWD login screen (Security fn is on) Lamp life reminder 3D reminder Screen Timer and other OSD pup-up fn. Pop-up screen and appear 10 sec in the center of the screen. End-users can press Menu to exit within 10 sec. Turn On/Off 3D warning message mechanism. Add one function item in OSD menu. Reminder screen 12