Acer H6510BD Acer Projector H6510BD, P1340W, X1140, X1240 Service Guide - Page 40

EDID Upgrade SOP Equipment List 1. PC : with parallel (printer) port 2. EDID Board 3. Printer cable : 25pin male-female (connect PC to EDID board) 4. D-sub cable* : with full 15pin (connect EDID board to Projector) 5. HDMI cable*(connect EDID board to Projector) 6. DVI cable* (connect EDID board to Projector) (*Note: Not every model's EDID input (D-sub, DVI, HDMI) is the same. Need to check what kind of file you need before download). Setup Equipment 1. 1. Let projector be in Full-power standby mode (Press "Power" and "Source" and plug in power cord into Projector immediately.) 2. Connect between PC, EDID board and the Projector: Link to Projector: For DVI-D DDC download (no need for X1140A, X1240,X1140, P1340W, H6510BD) "25pin male-female cable" (normal printer cable) PC with parallel (printer) port EDID board 2. Need to set Jumper before using EDID board: J6 : 1,2 short J8 : 1,2 short J10 : short Link to Projector: For HDMI DDC download (no need for X1140A, X1240,X1140) Please ignore this connector Link to Main board: For D-sub DDC download 40