Acer H6510BD Acer Projector H6510BD, P1340W, X1140, X1240 Service Guide - Page 54
Assemble Baffle LP, Hook top of Baffle LP first Fig. 1-14 & Hook bottom of Baffle
View all Acer H6510BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Push on the left corner until lock the screw well Lock the screw well Fig. 1-6 Fig. 1-7 Overfill Vertical Adjustment Screw M2, 8L Fig. 1-8 Overfill Horizontal Adjustment Screw M2, 8L For P1340W: 1.3 Assemble LP Module to HSG DMD (1) Assemble two Overfill adjustment screws (M2) to HSG DMD (Fig. 1-9). ** Adjustment criteria refer to below item 1.4 & Fig. 1-10. (2) Hook Clip LP to HSG DMD, and lock with screw well. (Fig. 1-11). (3) Press CLIP of BKT LP first and push it into the hole (Fig. 1-12). (4) Place LP Module on LP datum of "DMD HSG" and adjustment screw well (Fig. 1-13). (5) Assemble "Baffle LP", Hook top of Baffle LP first (Fig. 1-14) & Hook bottom of Baffle LP to HSG DMD well (Fig. 1-15). 1.4 Overfill Adjustment LP Module Overfill Adjustment Criteria: (1) Pre-assemble 2 adjusting screws. Criteria as Fig.1-12 (2) Alignment Sequence: a. To adjust "Horizontal Adjustment Screw" firstly, and then "Vertical Adjustment Screw". 54