Acer H6510BD Acer Projector H6510BD, P1340W, X1140, X1240 Service Guide - Page 93

Optical Problems Checking Items No. Item Trouble Shooting Guide 1 Brightness 1. Change lamp 2 Uniformity 1. Change lamp 1. Check ADC calibration 3 FOFO Contrast 2. Check user's menu brightness & contrast are default 3. Clean DMD 4. Clean PL 5. Check ILL stop assy 4 ANSI Contrast 1. Clean PL 2. Clean DMD 3. Change PL 5 Color 6 Color Uniformity 1. Check color wheel delay 2. Check CW 50% point. Replace CW if necessary 1. Change lamp 7 Blue Edge 1. Refer to next "Blue Edge" Trouble Shooting section 2. Change CM 3. Change SUB HSG 1. Refer to next page 8 Blue/Purple Border 2. Change CM 3. Change SUB HSG 9 Focus 10 Dust 1. Change Projection Lens 2. Check PL datum and DMD parallel Clean DMD 1. Check connector between chip BD and Main BD 2. Re-install DMD with chip BD 11 Horizontal/Vertical Strips 3. Check if any pin of C-Spring is missing, damaged or dirty 4. Change new Chip BD/C-Spring 12 Pixel Fail 5. Change new DMD Change new DMD (Refer to next "DMD Image Quality" section) 93